attachment_2_-_Specifications.pdf

Exterior door Exterior door

Building 1339 Exterior door

Internal office door

Internal office door

Latrine doors

Garage door access

Exterior door

Garage door access

Supply/Trailers Section

Exterior door

Modular Repair Section

Jet Engine Repair Section Material Support Section

Garage door access Garage door access

Attachment A

SP-8 SP-9

SP-10

Secondary Power Section

SP-7SP-6SP-2

SP-3 SP-4 SP-5

SP-1

Building 1342

Total ID Number Target Dimensions D1 D2 D3 D4 D5 D6 D7 D8 D9 D10 D11 D12 BASE Notes

1 ea

Number will correlate with specific box or table in schematic.

Overall dimensions of cabinet. Does not include casters.

Identifies method of picking up or moving cabinet. Casters, pallet jack, etc.

Identifies specific information about tops of cabinets or tables.

Top to bottom

D1-D-12 denote drawers or shelves (S). The number identifies depth of cabinet drawer or shelf in inches.

Example: D1 - 7 = Drawer depth of 7 inches.

NOTES: Additional information.

Attachment A1

JE-17 JE-18 JE-29 JE-39

JE-19 JE-20 JE-30 JE-40

JE-27 JE-37

JE-15 JE-16 JE-28 JE-38

JE-35JE-10 JE-25

JE-11 JE-12 JE-26 JE-36

JE-33 JE-23 JE-5 JE-6

JE-34 JE-24 JE-7 JE-8

JE-31

JE-32 JE-22 JE-3

JE-21

JE-4

Jet Engine Repair Section

JE-1 JE-2

JE-9

JE-13 JE-14

Attachment B

Total ID Number Target Dimensions D1 D2 D3 D4 D5 D6 D7 D8 D9 D10 D11 D12 BASE Notes

20 EA JE-1-20 60"W X 76"T X 36"D

S S S S

PALLET

2 DOORS / LOCKABLE / TILT OUT BINS ON INSIDE OF DOORS /

4 EA MOVABLE SHELVES

10 EA JE-21-30 8'L X 35"T X 30"D FLAT

WORK BENCH / 2 EA LEGS AND STRINGER / BUTCHER BLOCK

TOP

10 EA JE-31-40 60"W X 60"T X 28"D PALLET

CABINET WITH LOCKABLE DOORS / 4 EA HOOKS (EVENLY

SPACED FROM FRONT TO BACK IN THE CENTER OF THE

CABINET) WITH 4" THROAT CAPABLE OF SUPPORTING 50 LBS

EACH

Target dimensions may fluctuate 2" smaller and 2" larger than listed below.

JE-37 and JE-38 shall have a matching internal lock and key set.

JE-39 and JE-40 shall have a matching internal lock and key set.

Top to bottom

NOTES:

JE-31 and JE-32 shall have a matching internal lock and key set.

JE-33 and JE-34 shall have a matching internal lock and key set.

JE-35 and JE-36 shall have a matching internal lock and key set.

Attachment B1

Hook throat will be three (3) inches to four (4) inches max deep.

Note - Hooks may be curved or angled, and must be coated in rubber.

Bin front Bin Rear

Hooks will be four (4) inches minimum to six (6) inches max tall from the top of the bin to the bottom of the hook.

Orientation front to back

Hook lip will be minimum one (1) inch tall to max two

(2) inches tall.

Bin front Bin Rear

Bin Front

Bin Rear

JE-31-40 view: Inside bin looking up. Hooks spaced evenly from front to back.

Hook

Hook

Hook

Hook

Attachment B3

Modular Repair Section

MO-27

MO-33

MO-32

MO-

MO-

MO-22 MO-23

MO-

MO-

MO-16

Maintenance Platform

Maintenance Platform

MO-28 MO-29

MO-3 MO-2 MO-1

MO-26/31MO-19/30

MO-

MO-

MO-6 MO-5MO-8MO-9

MO-

MO-

MO-17 MO-18

MO-4MO-7

MO-

MO-15

Attachment C

Total ID Number Dimensions D1 D2 D3 D4 D5 D6 D7 D8 D9 D10 D11 D12 BASE Notes

5 ea MO-1-5 60"W X 60"T X 28"D S S S S 4"CASTER 4 EA ROLL OUT SHELVES / LOCKABLE DOORS

2 ea MO-6-7 60"W X 60"T X 28"D S S S 12

4"CASTER

3 EA ROLL OUT SHELVES / 1 LARGE DRAWER / LOCKABLE

DOORS

1 ea MO-8 60"W X 60"T X 28"D 8 8 8 12 12 12 4"CASTER LOCKABLE

1 ea MO-9 60"W X 60"T X 28"D 4 4 4 7 8 8 8 8 8

4"CASTER

ASSORTED DIVIDERS FOR ALL DRAWERS / LOCKABLE BIN WITH

INDEPENDENT LOCK

4 ea MO-10-13 60"W X 60"T X 28"D S S S S 4"CASTER 4 EA ROLL OUT SHELVES / LOCKABLE DOORS

2 ea MO-14-15 12'L X 35"T X 30"D FLAT

WORK BENCH / 3 EA SUPPORT LEGS WITH STRINGERS /

BUTCHER BLOCK TOP

1 ea MO-16 60"W X 60"T X 28"D S S S S 4"CASTER 4 EA ROLL OUT SHELVES / LOCKABLE DOORS

1 ea MO-17 10'L X 35"T X 30"D FLAT

WORK BENCH / 3 EA SUPPORT LEGS WITH STRINGERS /

BUTCHER BLOCK TOP

1 ea MO-18 60"W X 60"T X 28"D S S S S 4"CASTER 4 EA ROLL OUT SHELVES / LOCKABLE DOORS

1 ea MO-19 12'L X 35"T X 30"D FLAT

WORK BENCH / 33" WIDE CABINET WITH 5 EA DRAWERS (LEFT

SIDE SEE MO-30) / 2 EA SUPPORT LEGS (MIDDLE & RIGHT SIDE)

WITH STRINGER / BUTCHER BLOCK TOP / LOCKABLE

6 ea MO-20-25 10'L X 35"T X 30"D FLAT

WORK BENCH / 3 EA SUPPORT LEGS WITH STRINGERS /

BUTCHER BLOCK TOP

1 ea MO-26 12'L X 35"T X 30"D FLAT

WORK BENCH / 33" WIDE CABINET WITH 5 EA DRAWERS

(RIGHT SIDE SEE MO-31) / 2 EA SUPPORT LEGS (MIDDLE & LEFT

SIDE) WITH STRINGER / BUTCHER BLOCK TOP / LOCKABLE

1 ea MO-27 60"W X 37"T X 28"D 13 13 PALLET MINIMUM 2 EA 13" DRAWERS / LOCKABLE

2 ea MO-28-29 48"W X 48"T NA

WORK BENCH BACK STOP / WHITE IN COLOR / POWER STRIP /

LED LIGHING ON TOP

2 ea MO-30-31 60"W X 33"T X 28"D 3 4 4 6 7

PALLET

CABINET WILL BE INTEGRATED WITH WORK BENCH MO-19 /

LOCKABLE

2 ea MO-32-33 60"W X 37"T X 28"D 13 13

PALLET

MINIMUM 2 EA 13" DRAWERS / LOCKABLE / BUTCHER BLOCK

TOP

Target dimensions may fluctuate 2" smaller and 2" larger than listed below.

MO-9 shall have its own independent lock and key set, and approximately 500 individually separated compartments spread evenly through all drawers.

Top to bottom

NOTES:

All Modular Repair Bins shall share the same internal lock and key set with the exception of MO-9.

Attachment C1

Material Support Section

MS-12

MS-

MS-

MS-

MS-

4 MS-5 MS-6 MS-7 MS-8 MS-9 MS-10 MS-11

MS-13

MS-20 MS-21 MS-21 MS-22

MS-15MS-14

MS-

MS-

MS-

MS-

Office

Office

MS-23 MS-24 MS-25 MS-26Bridge

MS-19MS-18MS-17MS-16

Attachment D

Total ID Number

Target Dimensions D1 D2 D3 D4 D5 D6 D7 D8 D9 D10 D11 D12 BASE Notes

1 ea MS-1 60"W X 44"T X 28"D

S S S PALLET

3 SHELVES EVEN SPACED (NON MOVING) / LOCKABLE DOORS

1 ea MS-2 60"W X 60"T X 28"D

5 7 8 8 8 8 8 9 PALLET

ASSORTMENT OF DIVIDERS FOR ALL DRAWERS / 4 EA PAIRS

OF MATCHING KEYS FOR LOCK

1 ea MS-3 60"W X 60"T X 28"D

2 2 2 2 2 4 4 4 7 10 10 10 PALLET

ASSORTMENT OF DIVIDERS FOR ALL DRAWERS / 4 EA PAIRS

OF MATCHING KEYS FOR LOCK

1 ea MS-4 60"W X 60"T X 28"D

3 3 3 4 5 7 8 8 8 9 PALLET

ASSORTMENT OF DIVIDERS FOR ALL DRAWERS / 4 EA PAIRS

OF MATCHING KEYS FOR LOCK

1 ea MS-5 60"W X 60"T X 28"D

3 4 5 5 9 9 10 11 PALLET

RUBBERIZED COATING OR SHEETING ON TOP OF BIN /

LOCKABLE

1 ea MS-6 60"W X 60"T X 28"D

5 8 8 9 9 9 9 PALLET

RUBBERIZED COATING OR SHEETING ON TOP OF BIN /

LOCKABLE

1 ea MS-7 60"W X 60"T X 28"D

5 5 6 6 7 8 10 10 PALLET

RUBBERIZED COATING OR SHEETING ON TOP OF BIN /

LOCKABLE

1 ea MS-8 60"W X 60"T X 28"D

3 4 5 5 6 6 6 10 11 PALLET

RUBBERIZED COATING OR SHEETING ON TOP OF BIN /

LOCKABLE

1 ea MS-9 60"W X 60"T X 28"D

4 5 6 6 6 8 9 12 PALLET

RUBBERIZED COATING OR SHEETING ON TOP OF BIN /

LOCKABLE

1 ea MS-10 60"W X 60"T X 28"D

6 8 9 10 10 12 PALLET

RUBBERIZED COATING OR SHEETING ON TOP OF BIN /

LOCKABLE

1 ea MS-11 60"W X 60"T X 28"D

3 4 6 7 9 10 12 PALLET

RUBBERIZED COATING OR SHEETING ON TOP OF BIN /

LOCKABLE

1 ea MS-12 60"W X 60"T X 28"D

3 3 4 5 6 7 7 10 10 PALLET

RUBBERIZED COATING OR SHEETING ON TOP OF BIN /

LOCKABLE

1 ea MS-13 60"W X 60"T X 28"D

8 9 11 11 19 PALLET

RUBBERIZED COATING OR SHEETING ON TOP OF BIN /

LOCKABLE

1 ea MS-14 60"W X 60"T X 28"D

9 9 9 10 11 PALLET

RUBBERIZED COATING OR SHEETING ON TOP OF BIN /

LOCKABLE

1 ea MS-15 60"W X 60"T X 28"D

4 8 9 9 10 10 PALLET

RUBBERIZED COATING OR SHEETING ON TOP OF BIN /

LOCKABLE

2 ea MS-16-17 60"W X 36"T X 28"D

4 5 5 6 6 PALLET

ASSORTMENT OF DIVIDERS FOR ALL DRAWERS / BUTCHER

BLOCK TOP

1 ea MS-18 60"W X 36"T X 28"D

4 4 4 4 5 6 PALLET

ASSORTMENT OF DIVIDERS FOR ALL DRAWERS / BUTCHER

BLOCK TOP

1 ea MS-19 60"W X 36"T X 28"D

4 4 6 6 9 PALLET

ASSORTMENT OF DIVIDERS FOR ALL DRAWERS / BUTCHER

BLOCK TOP

1 ea MS-20 60"W X 36"T X 28"D S S S PALLET 60" TOP CABINET WITH 5 ROLL OUT SHELVES 2 ea MS-21-22 60"W X 36"T X 28"D 8 9 12 PALLET 60" TOP CABINET WITH 5 ROLL OUT SHELVES

1 ea MS-23 60"W X 36"T X 28"D 2 2 4 4 4 4 6

PALLET

14" TOP RISER WITH 6 PLUG POWER STRIP / DRAWER 5 & 6

PADLOCK TANGS / BUTCHER BLOCK TOP / ASSORTMENT OF

DIVIDERS FOR ALL DRAWERS

1 ea MS-24 60"W X 36"T X 28"D 4 4 6 6 9

PALLET

BUTCHER BLOCK TOP / ASSORTMENT OF DIVIDERS FOR ALL

DRAWERS

1 ea MS-25 60"W X 36"T X 28"D 4 4 8 12

PALLET

BUTCHER BLOCK TOP / ASSORTMENT OF DIVIDERS FOR ALL

DRAWERS

1 ea MS-26 60"W X 36"T X 28"D 4 4 6 4 4 6

PALLET

14" TOP RISER WITH POWER STRIP / DRAWER 5 & 6 PADLOCK

TANGS / BUTCHER BLOCK TOP / ASSORTMENT OF DIVIDERS

FOR ALL DRAWERS

2 ea MS-27-28 44"W X 32"T X 28"D 14 14

4"CASTER

BUTCHER BLOCK TOP / PUSH HANDLE / LOCKABLE / EACH

DRAWER CAPABLE OF SUPPORTING 400 LBS

2 ea MS-29-30 44"W X 32"T X 28"D 9 9 9

4"CASTER

BUTCHER BLOCK TOP / PUSH HANDLE / LOCKABLE / EACH

DRAWER CAPABLE OF SUPPORTING 400 LBS

Target dimensions may fluctuate 2" smaller and 2" larger than listed below.

Top to bottom

NOTES:

The following bins will require their own independent lock and key set. MS-2, MS-3, MS-4, MS-27, MS-28, MS-29, and MS-30. MS-24 and MS-25 shall share a matching lock and key set, independent from any other lock and key set.

MS-2 contains approximately 500 separate compartments spread evenly through the bin.

MS-3 contains approximately 500 separate compartments spread evenly through the bin.

MS-4 contains approximately 300 separate compartments spread evenly through the bin.

MS-16 contains approximately 25 separate compartments spread evenly through the bin.

MS-17 contains approximately 25 separate compartments spread evenly through the bin.

MS-18 contains approximately 25 separate compartments spread evenly through the bin.

MS-19 contains approximately 25 separate compartments spread evenly through the bin.

MS-24 contains approximately 320 separate compartments spread evenly through the bin.

MS-25 contains approximately 270 separate compartments spread evenly through the bin.

Remaining Material Support bins, not identified above, shall share the same lock and key set.

The follow bins require tool box foam installed in each drawer. MS-5 through MS-15, MS-20-30.

MS- 27, 28, 29, 30 shall each have their own individual lock and key set.

Attachment D1

Supply/Trailer Section

ST-1ST-2ST-3ST-4ST-7ST-8ST-9ST-10

ST-11

ST-12

ST-6

ST-5

Attachment E

Total ID Number

Target Dimensions D1 D2 D3 D4 D5 D6 D7 D8 D9 D10 D11 D12 BASE Notes

3 ea ST-1-3 60"W X 60"T X 28"D PALLET OPEN CABINET WITH LOCKABLE DOORS

1 ea ST-4 60"W X 60"T X 28"D 5 7 7 8 9 12 12

PALLET

ASSORTMENT OF DIVIDERS FOR ALL DRAWERS / 4 EA PAIRS

OF MATCHING KEYS FOR LOCK

2 ea ST-5-6 60"W X 60"T X 28"D S S S S

PALLET

4 EA ROLL OUT SHELVES / 33" RISER WITH 2 EA NON MOVING

SHELVES / NO DOORS

3 ea ST-7-9 60"W X 60"T X 28"D S S S PALLET 3 EA ROLL OUT SHELVES / LOCKABLE DOORS

2 ea ST-10-11 60"W X 60"T X 28"D 7 7 7 7 7 7 9 9

PALLET

ASSORTMENT OF DIVIDERS FOR ALL DRAWERS / 4 EA PAIRS

OF MATCHING KEYS FOR LOCK

1 ea ST-12 45"W X 33"T X 28"D 2 4 4 4 8

4"CASTER

OVERSIZED 6' BUTCHER BLOCK TOP / 12" RISER WITH SHELF /

LOCK BAR / CUSTOM CUT FOAM FOR TOOLS

Top to bottom

Target dimensions may fluctuate 2" smaller and 2" larger than listed below.

NOTES:

ST-4 contains approximately 106 separate compartments spread evenly through the bin.

ST-10 shall have its own independent lock and key set, and approximately 100 individually separated compartments spread evenly through all drawers.

ST-11 shall have its own independent lock and key set, and approximately 200 individually separated compartments spread evenly through all drawers.

ST-12 shall have its own independent lock and key set and will also require tool box foam in each drawer.

Attachment E1

SP-8 SP-9

SP-10

Secondary Power Section

SP-7SP-6SP-2

SP-3 SP-4 SP-5

SP-1

Attachment F

Building 1342

Total

ID

Number Target Dimensions D1 D2 D3 D4 D5 D6 D7 D8 D9 D10 D11 D12 BASE Notes

1 ea SP-1 10'L X 35"T X 30"D FLAT

WORK BENCH / 3 EA SUPPORT LEGS WITH STRINGERS /

BUTCHER BLOCK TOP

1 ea SP-2 60"W X 60"T X 28"D 2 2 4 5 6 6 7 8 9 PALLET CUSTOM CUT FOAM FOR TOOLS 1 ea SP-3 30"W X 33"T X 28"D 4 6 8 9 PALLET 12' BUTCHER BLOCK TOP COVERING SP-3, SP-4, SP-5 1 ea SP-4 30"W X 33"T X 28"D 6 9 10 PALLET 1 ea SP-5 30"W X 33"T X 28"D 4 4 6 10 PALLET 1 ea SP-6 60"W X 60"T X 28"D S S S PALLET 3 EA NON MOVABLE SHELVES 1 ea SP-7 60"W X 60"T X 28"D 2 4 4 4 4 7 7 8 10 10 PALLET ASSORTMENT OF DIVIDERS FOR ALL DRAWERS

2 ea SP-8-9 60"W X 76"T X 36"D S S S S

PALLET

2 DOORS / LOCKABLE / TILT OUT BINS ON INSIDE OF DOORS / 4

EA MOVABLE SHELVES

1 ea SP-10 36"W X 60"T X 36"D 4 4 4 6 6 6 6 6 12

PALLET

ASSORTMENT OF DIVIDERS FOR ALL DRAWERS / 4 EA PAIRS

OF MATCHING KEYS FOR LOCK

SP-7 shall have its own independent lock and key set. SP-7 contains approximately 220 separate compartments spread evenly through the bin.

SP-10 shall have its own independent lock and key set. SP-10 contains approximately 100 separate compartments spread evenly through the bin.

Top to bottom

Target dimensions may fluctuate 2" smaller and 2" larger than listed below.

NOTES:

SP-1 shall have its own independent lock and key set and will also require tool box foam in each drawer. Tool box foam will be cut to transfer tools from the old bin to the new bin.

Attachment F1

Attachment G

Attachment H

Attachment I

Attachment J

Attachment K