RFQ_SOW_Base_Wide_Carpet_&_Flooring.pdf

STATEMENT OF WORK

Maintain Flooring, Base Wide

XLWU 15-2053D

Tyndall Air Force Base, Florida

21 July 2017

1.0. SCOPE: Contractor shall furnish all labor, materials, transportation, tools, equipment, and supervision needed to replace flooring at Buildings listed below on Tyndall Air Force Base, Florida.

2.0. DESCRIPTION OF WORK:

2.1. Building 431

2.1.1. Remove existing carpet and transition strips. See attached drawing.

2.1.2. Clean, repair, patch floor as needed to provide smooth / level surface for the new carpet.

2.1.3. Install new Interface, Cubic, Horizontal carpet.

2.1.4. Install new Burke Flooring, #607, Cranberry transition strips at storage room, both ends of hallway and projection room door.

2.1.5. Large amount of equipment in room 104 and bolted down seating in room 101 to be moved as needed to install new carpet.

2.2. Building 505

2.2.1. Remove existing carpet, VCT in Comm. closet, cove base and transition strips. See attached drawing.

2.2.2. Clean, repair, patch floor as needed to provide smooth / level surface for the new LVT.

2.2.3. Install new Armstrong, Bravo Putty 12 x 24, LVT.

2.2.4. Install new Burke Flooring, #701, Black, cove base.

2.3. Building 1255

2.3.1. Remove 2 layers of existing carpet, cove base and transition strips.

See attached drawing.

2.3.2. Clean, repair, patch floor as needed to provide smooth / level surface for the new carpet.

2.3.3. Install new Interface, Cubic, Horizontal carpet.

2.3.4. Install new Burke Flooring, #597, Mocha cove base and transition strips at restrooms and double entrance doors.

2.3.5. Personal lockers in room 1 to be moved as needed to install new carpet.

2.4. Building 421

2.4.1. Remove carpet in all areas, cove base in room 403B and transition strips at rooms 208, 212 and 214. See attached drawing.

2.4.2. Clean, repair, patch floor as needed to provide smooth / level surface for the new carpet.

2.4.3. Install new Interface, Cubic, 6392 dimension carpet.

2.4.4. Install new Johnsonite, 92-Blue Lagoon, cove base and transition strips.

2.5. Building 1470

2.5.1. Remove existing carpet to bottom of riser at start of repair area on pulpit and at the balcony. See attached drawings.

2.5.1.1. Clean, repair, patch floor as needed to provide smooth / level surface for the new carpet.

2.5.1.2. Install new Milliken, Colorweave, Colored Crystal, 200

Ruby Gem to match existing.

2.5.1.3. Move large and small organ, piano, table, chairs, pews at balcony etc. as needed to replace carpet.

2.5.1.4. All risers and step shall have carpet.

2.5.2. Repair carpet in Sanctuary. See attached drawing.

2.5.2.1. Replace 12 stained, torn carpet tiles with new tiles.

2.5.2.2. Repair loose tiles and joints which are buckling at

approximately 30% of the area.

2.6. Building 703, Chapel 1 – Main Level, Balcony, stairs and steps

2.6.1. Remove existing carpet and transition strips. See attached drawing.

2.6.2. Clean, repair, patch floor as needed to provide smooth / level surface for the new carpet.

2.6.3. Install new patcraft, Scholastic II, Tuition 00471 carpet.

2.6.4. Install new Burke Flooring, #323, Bluebonnet transition strips at main area entrance and storage rooms’ doors.

2.6.5. Move pews in main area as need to install new carpet.

2.7. Building 2893

2.7.1. Remove existing carpet, cove base and transition strips. See attached drawing.

2.7.2. Clean, repair, patch floor as needed to provide smooth / level surface for the new carpet.

2.7.3. Install new Milliken, Ghost Artist, Facade, Conceal carpet.

2.7.4. Install new Johnsonite, #20, Charcoal, cove base and transition

2.8. Building 432

2.8.1. Remove existing carpet in rooms 128, 129 and 130, cove base in all areas and transition strip room 128 entrance. See attached drawing.

2.8.2. Clean, repair, patch floor as needed to provide smooth / level surface for the new carpet.

2.8.3. Install new Interface, Cubic, Dimension carpet in all areas.

2.8.4. Install new Burke Flooring, #701, Black, cove base and transition strip.

2.8.5. Room 128 has lockers and room 129 has large work benches to be moved as needed to install new carpet.

2.9. Building 9400

2.9.1. Remove existing carpet and transition strips. See attached drawing.

2.9.2. Clean, repair, patch floor as needed to provide smooth / level surface for the new carpet.

2.9.3. Install new Milliken, Ghost Artist, Facade, Conceal carpet.

2.9.4. Install new Johnsonite, #20, Charcoal, cove base and transition

2.10. Building 649

2.10.1. Remove existing carpet, cove base and transition strips. See attached drawing.

2.10.2. Clean, repair, patch floor as needed to provide smooth / level surface for the new carpet.

2.10.3. Install new Interface, Cubic, Dimension carpet.

2.10.4. Install new Burke Flooring, #660, Rocky, cove base in all areas and transition strips at all doors.

2.10.5. Move equipment, cabinets, etc. in rooms 101, 119,121 and 123 as needed to install new carpet.

2.11. Building 164

2.11.1. Remove existing carpet, vinyl cove base and transition strips. See attached drawing.

2.11.2. Clean, repair, patch floor as needed to provide smooth / level surface for the new carpet.

2.11.3. Install new Interface, Cubic, Balance carpet.

2.11.4. Install new Burke Flooring, #323, Bluebonnet, cove base in all areas except rooms 140, 141, 142 and 143 and transition strips at all doors from corridor excluding Vault area.

2.11.5. Lockers in room 131 and work benches in room 128 to be moved as needed to install new carpet.

2.11.6. Work in Vault area shall be done on weekends only.

2.11.7. Building is located in the Airfield Controlled area.

2.12. Building 7025

2.12.1. Remove existing carpet, vinyl cove base and transition strips. See attached drawing.

2.12.2. Clean, repair, patch floor as needed to provide smooth / level surface for the new carpet.

2.12.3. Install new Interface, Cubic, Horizontal carpet.

2.12.4. Install new Burke Flooring, #597, Mocha, cove base in all areas and transition strips at room entrance doors.

2.12.5. Building is located in a Secure Area.

2.13. Building 290

2.13.1. Carpet replacement – See attached drawing

2.13.1.1. Remove existing carpet, vinyl cove base and transition strips. See attached drawing.

2.13.1.2. Clean, repair, patch floor as needed to provide smooth / level surface for the new carpet.

2.13.1.3. Install new Interface, Cubic, Dimension, carpet.

2.13.1.4. Install new Burke Flooring, #660, Rocky, cove base in all rooms and transition strips at all rooms excluding Vault area.

2.13.1.5. Lockers in room 170 and work benches in room 174

shall be moved as needed to install new carpet.

2.13.1.6. Work in Vault area shall be done on weekends only.

2.13.2. Tile replacement – See attached drawing

2.13.2.1. Remove carpet in Duty Desk area and demo existing tile in all other areas.

2.13.2.2. Remove existing vinyl cove base at Duty Desk area and tile cove base in all other areas.

2.13.2.3. Clean, repair, patch floor as needed to provide smooth / level surface for the new tile.

2.13.2.4. Install new 18 x 18 daltile, Heathland, White Rock tile in all areas with Custom Building Products #370 Dove Gray grout and Ashland accent tile.

2.13.2.5. Install new Burke Flooring, #660, Rocky, vinyl cove base at Duty Desk counter and display cabinet. Install White Rock tile cove base everywhere else. No cove base to be installed on blue wall at Duty Desk area.

2.13.2.6. Tile lay out shall be in a diamond pattern. Contractor shall verify tile layout prior to start of work.

2.13.2.7. Tile shall end at center of closed doors at all doors without a threshold.

2.13.2.8. Repair any wall damage at the cove base which occurs due to the replacement.

2.13.3. Building is located in the Airfield Controlled area.

2.14. Building 1138

2.14.1. Remove existing carpet and vinyl cove base. See attached drawing.

2.14.2. Clean, repair, patch floor as needed to provide smooth / level surface for the new carpet.

2.14.3. Install new Interface, Cubic, Construction, carpet.

2.14.4. Install new Burke Flooring, #663, Sky Gray, cove base in all areas.

Metal transition strip at doors and open office area border shall remain.

2.14.5. Open office area has system furniture.

2.15. Building 647

2.15.1. Remove existing carpet and vinyl cove base. See attached drawing.

2.15.2. Clean, repair, patch floor as needed to provide smooth / level surface for the new carpet.

2.15.3. Install new Interface, Cubic, Construction, carpet.

2.15.4. Install new Burke Flooring, #662, Rocky, cove base in all areas.

2.15.5. Replace transition strips to match new cove base at both double door entrances, Comm. room in Command area, janitor closet, 2 at break room and Comm. Room south of break room.

2.15.6. Large open areas have system furniture.

2.16. Building 6011

2.16.1. Remove 4”x4” ceramic tile area at entrance door.

2.16.2. Remove carpet in large and small rooms.

2.16.3. Remove VCT in restroom.

2.16.4. Remove vinyl cove base in all areas.

2.16.5. Clean, repair, patch floor as needed to provide smooth / level surface for the new LVT.

2.16.6. Install new Armstrong, Raw Crete, Paradiso, 18 x 18, LVT in all areas.

2.16.7. Install new Burke Flooring, #597, Mocha, cove base in all areas.

2.16.8. Remove toilet and partition and reinstall on new flooring and make any adjustments needed for change in floor height.

2.17. Carpet and tile shall be put under removable thresholds.

2.18. Buildings will remain occupied during work.

2.19. Move furniture as needed to accomplish the work.

2.20.Contractor shall coordinate phasing of work with Facility Manager.

2.21. Provide Facility Manager with extra carpet tiles for replacement later.

Provide at least 4 tiles for the smaller buildings and at least 9 for the larger ones.

3.0. HAZARDOUS MATERIAL INVENTORY AND TRACKING: The contractor shall submit TAFB Form 81 (Contractor’s Hazardous Material Questionnaire – Attachment 3) and TAFB Form 82 (Short-Term Contractor Hazardous Material Inventory – Attachment 4), prior to starting work. The Contractor should note that Tyndall AFB is required to report chemicals used such as (but not limited to) compressed gases, adhesives, aerosol cans, sealants, paints, lubricants, oils, cleaners, degreasers, pesticides. Copies of manufacturer-specific Material Safety Data Sheets (MSDS) must be attached to TAFB Form 82. After submission, 325 CES/CEI will notify the Project Manager and CONS of the reportable chemicals and of any special instructions. The Contractor is required to submit TAFB Form 83 (Contractor Environmental Reporting Entry Form – Attachment 6) at the completion of the project. The CO must be notified of any changes from the original submittal (i.e.

new chemical is added, size of container or unit of issue changes or if the manufacturer changes). These MSDSs shall also be readily accessible at the location of each hazardous material. MSDS shall be provided to CE Environmental Engineering and to the Quality Assurance Personnel, and approved by the government, prior to commencement of work.

4.0. HOURS: The normal duty hours of work on Tyndall AFB are from 6:30 AM to

5:00 PM, Monday thru Friday excluding Federal Holidays. All work shall be performed during normal duty hours. All other hours shall be requested through the Contracting Officer for approval. This request shall be submitted no less than three

(3) workdays prior to the time requested.

5.0. MATERIALS: All material shall be high quality from a well-known Manufacturer and used per the manufacturer’s recommendations.

6.0. DEBRIS AND MATERIALS: The contractor shall dispose of all debris and waste materials generated by any work under this contract on a daily basis off-base at no additional cost to the government.

7.0. BASE ACCESS: The contractor shall notify Civil Engineering Quality Assurance

(QA) Personnel at 850-283-1380 at least two week prior to start of work to obtain Base Access badges.

8.0. COORDINATION: The contractor shall notify Civil Engineering Quality

Assurance (QA) Personnel at 850-283-1380 one week prior to start of work. The QAP shall inspect all work.

9.0. DRAWINGS: Drawings are provided for reference and are for “Official Use

Only”. All dimensions, measurements and quantities etc. are approximate and shall be verified by the Contractor.

10.0.SAFETY: The contractor shall comply with all Federal, State and Local

Regulations.

114 108 107 106 105 104

MEN

WOMEN

LOBBY

PROJECTION ROOM

HALLWAY

MECHANICAL COMPUTER/TRAINING BRIEFING BRIEFING WTT

MAIN BRIEFING/

ACADEMICSTUDY/OFFICE

COMM.

9'-10 1/2"9'-11"9'-11"9'-11"21'-6 1/2"

14'-7"

72'-0"

4'-5"

6'-0"

4'-1 1/2"

3'-9 1/2" 2'-2 1/2"

4'-5"

SCALE - 1/4"=1'-0"

11'-10 1/2"

6'-7"

4'-8"

4'-8"

7'-0"

5'-4 3/4"

8"

10'-6" 8" 6'-10" 8"

15'-4 1/2" 5'-5" 30'-4 1/2" 8"

8"

19'-9 1/2"

4'-11"

13'-1 1/2"

8"

8"

8" 8'8"

8"

13'-3"

8"

10'-7"

10'-7"

8"

3'-1 1/4"

8" 40'-0"

8"

15'-7"

5'-4"

4'-4"

3'-2"

3'-2"

8"8"

3'-8"

BRIEFING

2'-9"

10'-55 8" 11'-07

8"

CARPET REPLACEMENT AREA

FLOOR PLAN

AS-BUILT

FIRST FLOOR PLAN

SCALE: 1" = 20'

15 DEC 09

ENTIRE BLDG

15 DEC 09

MIMS

AS BUILT MIMS

1 1

TITLEBLOCK MIMS

15 DEC 09

15 DEC 09

FLOOR PLAN

AS-BUILT

FIRST FLOOR PLAN

SCALE: 1/4" = 1'-0"

24 FEB 10

ENTIRE BLDG

24 FEB 10

24 FEB 10

24 FEB 10

BLDG 1470

STAIRWAY

No 2

OFFICE

JAN.

STO.

STO.

C O

R R

ID

O R

No 1

STAIRWAY

TOILET

FOYER 204

CHAPLAIN'S OFFICE

CHAPLAIN'S OFFICE

CHAPLAIN'S OFFICE

CHAPLAIN'S OFFICE

CONFERENCE ROOM

FOYER

DUCT CHASE

253 SF

50 SF

58 SF

166 SF

128 SF

210 SF

208 SF240 SF

214 SF

518 SF

67 SF

218 SF

379 SF

115 SF

28 SF

640 SF

BALCONY

NIC

RR

NIC

89 SF

NIC

CPT

CPT

CPT

CPT

CPT

CPT

CPT

CPT

CPT

CPT

CARPET REPLACEMENT AREA

STORAGE

STORAGE

STORAGE

RESTROOM

STORAGE

HALL

STORAGE

SACRISTY

STORAGE

RESTROOM

FOYER

STAGE

MAIN AREA

106A

HALL

STORAGE

CARPET REPLACEMENT AREA

A E

T C

P H

A S

E I

I B

L D

G

F

L O

O R

P

A

N

FO

R O

FF

IC

IA

L

USE O

NLY

A E

T C

P H

A S

E I

I B

L D

G

O

A

N

FO

R O

FF

IC

IA

L

13'-4"

18'-8"

'-8

4'

7'

12'-8"

43'-4"

9'-4"

20'

'-8

'-4

'-4

8"

'-4

'-8

'-4

6'-8"

11'

11'

11'

'-7

4'-8"

4'-2"

11'

'-7

8'

2"

8"6'

11'-1"

16' 4'-8"

3'-4" 2'-8"

3'-4"

'-0

'-2

'-3

'-1

'-8

'-8

FLOOR PLAN

AS-BUILT

FIRST FLOOR PLAN

SCALE: 1" = 20'

21 JULY 09

ENTIRE BLDG

21 JULY 09

21 JULY 09

21 JULY 09

17'-0"

'-5

6'

-6

'-2

13'-9" 15'-11" 14'-5" 8'-4" 8'-6" 39'-5" 5'-9"

9'-10" 10'-0" 13'-0" 12'-10" 23'-8" 4'-6"

'-5

10'-0" 4'-0"

7' -1

0" 3'

-8

14'-4"

'-1

"6' -8

125'-9"

'-6

'-1

11'-0"4'-4" 22'-0"

'-7

'-0

5'-10"

6' -9

5' -2

18'-9 1/2"

5'-1"

4'-0"

RM 101 RM 103 RM 105 RM 107 RM 109

RM 111

RM 100 RM 102 RM 104 RM 106

RM 108

RM 110

RM 112

RM 115

RM 113

W O

M E

N 'S

MEN'S

ROOM

SHOWER'S

RM 114

NW CORRIDOR

N E

C O

R R

ID

O

R W

E S

T C

O R

R

ID

O R

RM 124

RM 123

RM 122RM 121

RM 118

RM 117 RM 119

RM 133

RM 134

RM 135

RM 136

RM 132

RM 131

RM 130

RM 129

RM 128

RM 125RM 126

RM 120

ENTRANCE

HERITAGE

RM

COMM

RM

MECH

RM 1

MECH

RM 2

5'-10"

5'-1"

'-8

4'

-1 0"

10'-8" 6'-10" 16'-0"

'-8

4'

-1 0"

'-2

12'-5"

'-0

'-0

'-1

0" 8'

-8

7' -2

'-4

23'-4"

10'-4"5'-1"18'-5 1/2"

9'-4 1/2" 8'-9"

AREA FOR NEW CARPET

A E

T C

P H

A S

E I

B L

D G

O

N

'-8

10'-4"

61'-4"

'-3

5'-3"

'-4

'-4

PRINT ROOM LOCKERS /DRESSING

PMEL

CAD / SUPV

OFFICE

CREW CHIEF

OFFICE SPACE

CABLE SUPPLY

NCOIC / ASST.

CABLE SYS

WIRE CHIEF

OFFICE

FOYER

COMMER COMM

BILLING OFFICIAL

NCOIC / ASST.

TELE. SYS.

BREAK ROOM

MENS WOMENS

HALL 1

FRAME & EQUIPMENT

ROOM

CREW CHIEF

OFFICE SPACE

SWITCH BOARD

SWBD

SUPV.

MENS

MECHANICAL ROOM

SWITCH ROOM

SWITCH TECH

OFFICE

BATTERY

ROOM DISA ROOM

MECHANICAL

YARD

HALL 2

16'-9"

'-7

46'-2"

4'-9"

19'-4"

6'-4"

20'-0"

4'

'-1

'-8

62'

'-4

71'-4"80'-6"

'-8

46'-10" 20'-8" 39'-2" 8"

45'-6"

6' 1

'-2

'-4

'-6

'-1

50'-8"

'-9

23'-4" 15'-4"

22'-8"

STORAGE

FOYER

AREAS FOR CARPET REPLACEMENT

FLOOR PLAN

AS-BUILT

FIRST FLOOR PLAN

SCALE: 1" = 25'

08 JAN 08

ENTIRE BLDG

08 JAN 08

MIMS

AS BUILT MIMS

08 JAN 08

1 1

08 JAN 08

HVAC ROOM

OFFICEKITCHEN

LOUNGE

OFFICE

BRIEFING

ROOM

BRIEFING

ROOM

BRIEFING

ROOM

R/R

OFFICE

OFFICE

STORAGE OFFICE

LIFE SUPPORT

LIFE SUPPORT

NIC

QT

NIC

NIC

NIC NIC

QT

QT

NIC

BRIEFING ROOM

R/R

AUDITORIUM

OFFICE

NICNIC

NIC

NIC

NIC

STORAGE

ROOM

NIC

NIC NIC NIC

NIC

NIC

NIC

NIC

NIC NIC

NIC

NIC

168 SF 145 SF 150 SF 153 SF

400 SF

63 SF

572 SF

181 SF

213 SF

154 SF 99 SF 271 SF

37 SF

764 SF

496 SF

174 SF

171 SF250 SF147 SF88 SF

89 SF

280 SF

260 SF

275 SF

222 SF 158 SF

163 SF

161 SF

160 SF

133 SF

20 SF

183 SF

257 SF 179 SF 377 SF

641 SF

204 SF

151 SF

133 SF

204 SF355 SF

479 SF

769 SF

404 SF

104 SF 136 SF

50 SF

141139

134 135 136

150154

123 126

119 155

115 120114

113109

QT QT

CORRIDOR

274 SF

JANITOR

132 151

QT

MEN HALL

90 SF

QT

QT

QT

QT

ORDERLY ROOM

FOYER

QT QTQT

QT

CORRIDOR

300 SF

33 SF

CPT

BRIEFING ROOM

CPT

BRIEFING ROOM

BRIEFING ROOM

BRIEFING ROOM

BRIEFING ROOM

BRIEFING ROOMBRIEFING ROOM

CPT

CPT

CPT

CPT

CPT

CPT

CPT

CPT

BRIEFING ROOM

BRIEFING ROOM

BRIEFING ROOM

CPT

HALL

QT

WOMEN

211 SF

QT

STORAGECOMMBRIEFING ROOM

CORRIDOR

142 SF

NIC

102101 103 104

BRIEFING ROOMBRIEFING ROOMBRIEFING ROOM

BRIEFING ROOM

SECURE

BRIEFING ROOM

CORRIDOR

N

IC

S

F

C O

R R

ID

O R

BRIEFING ROOM

BRIEFING ROOM

BRIEFING ROOM

C O

R R

ID

O R

C O

R R

ID

O R

CORRIDOR

HALL

CARPET REPLACEMENT AREAS

VAULT AREA

A E

T C

P H

A S

E I

B L

D G

O

N

10' X 10' ROLL-UP DOOR10' X 10' ROLL-UP DOOR

36"X36"

SHOWER

36"X36"

SHOWER

10' X 10' ROLL-UP DOOR

5 6

2' 10' 6'-8" 12'-4" 10'-9" 7"

4'-8" 3"

10'-11" 10'-11" 5'-4" 2'-8" 10' 2'

2' 10' 2' 3'-4" 1'-4" 11'-4" 15'-5" 10'-5" 6'-6" 3'-4" 16' 2'-4" 3'-4" 2' 10' 2'

18'-8" 43'-8" 19'-4" 19'-8"

101'-4"

'-7

'-5

'-2

'-5

18'-8" 23'-1" 16'-5" 10'-11" 12'-7" 19'-8"

4'-7"

34'-8"

1' 1'-4" 3'-4" 2'

FILLED CELLS @ 32" O.C. (TYP)

1 #5 REBAR VERTICAL W/ CONC.

7'-8" 12'

1 #5 REBAR VERTICAL @ 16" o.c. AND

ALL CELLS FILLED SOLID IN 12" WALL (TYP)

10' X 10' ROLL-UP DOOR

MAINTENANCE BAY

510 SF

MECHANICAL RM

139 SF

OFFICE

118 SF

MEN'S RR

115 SF

WOMEN'S RR

115 SF

SHOP CHIEF

122 SF

MAINTENANCE BAY

495 SF

HALL

52 SF

HALL 168 SF

ACCT CUSTODIAN

109 SF

CREW CHIEFS

168 SF

112 SF

JAN.

26 SF

COMM

28 SF

BREAKROOM

305 SF

CARPET REPLACEMENT AREA

FLOOR PLAN

AS-BUILT

FIRST FLOOR PLAN

SCALE: 3/16" = 1'-0"

12 APR 10

ENTIRE BLDG

12 APR 10

12 APR 10

12 APR 10

CONFERENCE /

TRAINING /

LIBRARY

OFFICE

OPEN OFFICES

OFFICE

OFFICE

VEHICLE BAYSSOILS LAB

MEN

WOMEN

QT

CPT

QT

CPT

CPT

QT

1HALL

MECHANICAL

COMM RM

AIR

MECH.

A/C

CPT

CPT

QT

QT

HALL A

HALL B

NIC

NIC

NICQT

CARPET REPLACEMENT AREAS

A E

T C

P H

A S

E I

I B

L D

G

F

L O

A

N

FO

R O

FF

IC

IA

L