Statement_of_Need_Toolmakers_lathe_20160826_Amendment_2.docx

DEPARTMENT OF THE AIR FORCE

9TH MAINTENANCE SQUADRON (ACC) BEALE AIR FORCE BASE, CALIFORNIA

MEMORANDUM FOR 9 CONS/LGCB FROM: 9 MSG/SDSX

SUBJECT: Statement of Need for Toolmakers Lathe

1. Purpose: Upgrading one of three Engine Lathes that is outdated and bulky. Toolmakers Lathes are specifically designed for small intricate parts, especially useful in the manufacturing of highly precise aircraft bushings and specialized fasteners.

2. Scope or mission: Aircraft: Metals Technology is tasked with fabricating, repairing and inspecting precision metal components used in the RQ-4, U-2 and T-38 airframes. Additionally, section is responsible for locally manufacturing custom tools, repairing damaged Aerospace Ground Equipment and Aircraft Munitions/Armaments.

3. Impact: Wi11 provide an essential capability, not currently available, in the fubrication of highly precise, intricate components usedinthe repair of aircraft and support equipment

4. Background: All three Engine Lathes located in Aircraft Metals Technology were designed with large scale operations in mind. The Toolmakers lathe will replace the Lelond Makino Engine lathe to accommodate machining small intricate parts.

5. Special Requirements: See specifications listed below.

· Lathe MUST be specified as a "Toolmakers Lathe" or "Tool Room Lathe". This designation signifies that the manufactures sole intent was to produce a lathe that far exceeds the industrial standard for manufacturing small complex special tools. Not to be confused with "Bench Lathes". Bench Lathes are typically small in size just like the Toolmakers Lathe however they lack the required tolerance used during manufacturing and are specially designed for non-industrial/home use.

· Lathe MUST be for manual operation only, no CNC (Computer Numerically Controlled) capability.

· Lathe MUST be configured for 230 volt, 3 phase electrical input.

· Lathe MUST meet or exceed manufacturing standards/specifications listed for GSA part number: MODEL EE 10x20. Monarch Lathes GSA Contract # GS-06F-0018T

· Lathe MUST include the following accessories: Taper Attachment, Steady Rest, Follow Rest, Tailstock, Machine mounted digital readout system and Collet Attachment with Drawbar/Hand wheel configuration.

image1.jpeg