Salient_Characteristics.pdf

Attachment 1: Description of Supplies and Salient Characteristics

GNSS/GPS

Precise Positioning Service (PPS) and Standard Positioning Service (SPS) Performance Standards - Accuracy requirements under normal conditions which may vary depending on satellite geometry, atmospheric conditions, obstacles, multipath, distance from the base receiver and baseline lengths.

Differential GNSS positioning (Mapping GNSS Receivers) Horizontal 0.25 m + 1 ppm RMS Vertical 0.50 m + 1 ppm RMS SBAS differential positioning accuracy less than 5 m RMS

High-Precision Static (Survey GNSS Receivers) Horizontal 5 mm + 0.1 ppm RMS Vertical 5 mm + 0.5 ppm RMS

Static and Fast Static (Survey GNSS Receivers) Horizontal 5 mm + 0.5 ppm RMS Vertical 5 mm + 0.5 ppm RMS

Real Time Kinematic (RTK) surveying / Single Baseline <30 km (Survey GNSS Receivers) Horizontal 10 mm + 1 ppm RMS Vertical 20 mm + 1 ppm RMS

Network RTK (Survey GNSS Receivers) Horizontal 10 mm + 0.5 ppm RMS Vertical 20 mm + 0.5 ppm RMS RTK start-up time for specified precisions max 10 seconds

Physical Specifications Radio Modem (Survey GNSS receivers)Radio ModemIntegrated, sealed 450 MHz wide band receiver/transmitterAbility to be a stand alone base or roverTransmit power: 1/2WFrequency Range of internal radio

410-470 MHz

Certifications Satellite Specifications and Real Time Correction Sources Satellite Constellations and SignalsGNSS enabled – options to include current and planned constellations:

GPS (L1C/A, L1C, L2C, L2E, L5); GLONASS

(L1C/A, L1P, L2C/A, L2P, L3); Galileo (GIOVE-A and GIOVE-B, E1, E5a, E5B); Beidou (B1, B2, B3)GNSS Channels

440 (Survey Receivers); 220 (Mapping Receivers)

Positioning Rate 20 Hz

Battery and Operating Time Internal receiver battery (without radios) Minimum 5 hours Internal receiver battery (with radio usage) 450 MHz receive only option – 5 hours

450 MHz receive/transmit option (.5W or 2.0 W) – 3 hours

Removable and Swappable Battery required For all day continuous use

Safety Standards Meet EPA Safety Standards

Other Communication Ports USB, Serial, 7 pin serial to be compatible with legacy equipment, Bluetooth Cellular, Bluetooth and Wifi Cellular, Bluetooth and Wifi capable with the ability for it to be turned off by user interface Operating temperature –22 °F (–30 °C) to +120 °F (+49 °C)

IAW MIL-STD-810G, Low Temp Operation (Method 502.5, Procedure II) High Temp Operation (Method 501.5, Procedure II)

Storage Temperature –40 °F (–40 °C) to +158 °F (70 °C) IAW MIL-STD-810G, Low Temp Operation (Method 502.5, Procedure I) High Temp Operation (Method 501.5, Procedure I)

Dust and water proofing IP67 Humidity 100%, condensing

100% RH temp cycle –20 °C/60 °C (–4 °F/140 °F) MIL-STD-810G, Method 507.5

Dimensions Compact and deployable. Not to exceed 20 cm x 20 cm x 15 cm (length x width x height).

Weight Not to exceed 1.8 kg (4 lbs)

Shock and Vibration Survive 2 m drop onto concrete and MIL-STD-810F, FIG.514.5C-1

Data Storage 50 MB internal memory Input and Output Formats RTCM 2.1, RTCM 2.3, RTCM 3.0, RTCM 3.1, NMEA

TOTAL STATION

Angle measurement

Angular Accuracy (Standard deviation based on

DIN 18723)

Minimum of 5" (1.5 mgon)

Angle Display (least count) 0.1" (0.01 mgon)

Automatic level compensator

Accuracy 0.5" (0.15 mgon) Range ± 5' (±100 mgon)

Distance measurement/Accuracy (RMSE) Prism mode Standard 2 mm + 2 ppm Tracking 5 mm + 2 ppm

DR mode Standard 2 mm + 2 ppm (0.0065 ft + 2 ppm) Tracking 5 mm + 2 ppm (0.013 ft + 2 ppm)

Measuring time Prism mode Standard Max 1.5 sec Tracking Max 0.5 sec

DR mode Standard max 5 sec Tracking Max 0.5 sec

Measurement Range (under standard clear conditions

1 prism 2400 m

Shortest range (Prism) 0.5 m Prism-less 900 m

Shortest range (prism-less) 1 m Prism-less mode white card (90% reflective) 1200 m Prism-less mode gray card (18% reflective) 550 m

Physical Specifications Drive System Rotation speed 110 degrees/sec Rotation time Face 1 to Face 2 3 sec Positioning time 180 degrees 3 sec Clamps and slow motions Endless fine adjustment

Telescope Magnification 30× Aperture 40 mm Field of view at 100 m 2.5 m at 100 m Shortest focusing distance 2 m

Operating time One internal battery 5 hours Multi-battery adapter 15 hours

Other Communication USB, Serial Operating temperature –22 °F (–30 °C) to +120 °F (+49 °C)

IAW MIL-STD-810G, Low Temp Operation (Method 502.5, Procedure II) High Temp Operation (Method 501.5, Procedure II)

Dust and water proofing IP65 Humidity 100% condensing

Robotic

Autolock and Robotic Range Unpowered prisms Min 500 m Powered prisms Min 800 m

Autolock pointing precision at 200 m (656 ft) (Standard deviation) Unpowered prisms <5 mm Powered prisms <5 mm

Type of radio internal/external 2.4 GHz frequency-hopping, spread-spectrum radios

RADIO

High Over-the-Air Link Rate 19,200 bps (both GMSK and 4FSK); Supports 1 Hz

RTK corrections for multi-constellation receivers Configurable Transmit Power Power settings: 0.1 Watts, 0.5W, 1 W, 2W, 4W and upwards to 35W; configurable to maximum power output for localized region

Available Bandwidth 410 MHz to 430 MHz and 430 MHz to 470 MHZ models; Configurable for both 12.5 kHz and 25 kHz bandwidth spacing

Modem Specifications Link Rate: 19,200 bps/4FSK, 9600 bps/4FSK, 19,200 bps/GMSK, 16,000 bps/GMSK, 9600 bps/GMSK, 8000 bps/GMSK, 4800 bps/GMSK

Physical Specification Enclosure IP67 (Dustproof and watertight to depth of 1 m for

30 minutes) Operating Temperature –40 °C to +80 °C (–40 °F to +185 °F) Vibration MIL-STD-810F

DATA CONTROLLER

Display VGA display, sunlight-readable color, backlight, touchscreen

Communication Ports USB Host, 9-pin serial RS-232 Memory Minimum 256 MB RAM Storage Minimum 2 GB Expansion Memory card slot Camera / GPS / Compass / Accelerometer Integrated camera with dual white light LED flash, LED flashlight function Integrated GPS (SBAS enabled) Integrated compass Integrated accelerometer Integrated GPS

Optional radio compatible with optional internal

2.4 GHz frequency-hopping spread-spectrum radio

Environmental specifications meets:

Operating Temperature –30 °C to 60 °C (–22 °F to 140 °F) Storage Temperature –40 °C to 70 °C (–40 °F to 158 °F) Temperature shock –35 °C/65 °C (–31 °F/149 °F) MIL-STD-810G, Method 503.5, Procedure I Humidity 90%RH temp cycle –20 °C/60 °C (–4 °F/140 °F) MIL-

STD-810G, Method 507.5 Sand & dust IP6x: 8 hours of operation with blowing talcum powder (IEC-529) Water IPx7: Immersed in 1 m of water for 30 minutes

(IEC-529)

Drop 26 drops at room temperature from 1.22 m (4 ft) onto plywood over concrete MIL-STD-810G, Method 516.6, Procedure IV

Vibration General Minimum Integrity and Loose Cargo test MIL-STD 810G, Method 514.6, Procedures I, II

Altitude 4,572 m (15,000 ft) at 23 °C (73 °F) and 12,192m (40,000 ft.) at –30 °C (–22 °F) MIL-STD-810G, Method 500.5, Procedures I, II, III

OFFICE SOFTWARE

• Shall Integrate with Autodesk and ESRI:

• Ability to export features to GIS file formats including shape files (.shp) and geodatabase XML files.

• Ability to import features in GIS geometry (point, line and polygon) formats with attribution

• Shall be capable of creating and managing feature libraries and matching attribute schema, layers and symbology from both GIS and CAD platforms

• Capable of viewing and selecting features directly from GIS shapefile (.shp) and AutoCAD (.dwg or .dxf) file formats

– Shall support background files including vector or raster

• Offline Software Licensing and Activation

• Survey office software

– Shall have the ability to store and work with data collected by various instruments in the same software file format (i.e. GNSS, Total Station, Scanner, Photogrammetry and Digital Level data in a single project file).

FIELD SOFTWARE

• Shall Integrate with Autodesk and ESRI

• Shall support background files including vector or raster

• Shall have capability for new data collection and update existing data sets

• Survey field software

– Survey field software shall have ability to store and work with data collected by various instruments in the same software file format (i.e. GNSS, Total Station, Scanner, Photogrammetry and Digital Level data in a single project file).

– Shall be capable of combined data collection utilizing both GNSS and total station instruments simultaneously in a single field session file.

Optional

Training Requirements

• Shall offer mission specific customized curriculum

– Integration with existing curriculum and workflow at 364th Training Squadron / Detachment 1 – Engineering 3E5X1, Fort Leonard Wood, Missouri

• Global on-site training required

• Online training

• Quick Guides

• Advanced courses

• Training shall be conducted by a Manufacturer Certified Military Trainer who has substantial, successful, and joint service training experience in both real-world military survey missions, and military survey instruction or instruction development.

• Manufacturer Certified Military Trainers shall be required to have prior substantial US Military training or training development experience.

• Substantial experience shall be proven through documents showing eight or more years of military surveying experience, and at least three of those years must have been as a full-time military surveying instructor or instruction developer

Support Requirements

• Online registration system for software and hardware

• Offline Software Activation

• Global Support (English speaking)

– 24 hour/6 day

– Web based, phone, email options