25QA802 Combo - HVAC Materials..pdf

92d Contracting Squadron RFQ FA462025QA802

COMBINED SYNOPSIS/SOLICITATION

Entomology Renovation Materials HVAC

FA462025QA802

This is a combined synopsis/solicitation for commercial services prepared in accordance with (IAW) the format in FAR Subpart 12.6 and FAR Part 13, as supplemented with additional information included in this notice. This announcement constitutes that only solicitation/notice; quote/response are being requested and a written solicitation will not be issued. This solicitation will be posted to the SAM.gov website as a 100% Total Small Business Set Aside.

The 92d Contracting Squadron is issuing this combined synopsis/solicitation as a Request for Quote (RFQ) under number FA462025QA802 for Entomology Renovation Materials HVAC and shall be used to reference any written quote provided under this RFQ.

The Government intends to award one (1) Firm Fixed-Price Commercial Contract Award. The following solicitation document, incorporated provisions, and clauses are in effect through Federal Acquisition Circular FAC 2025-04 Effective 11 June 2025.

This acquisition is 100% Small Business Set-Aside and will utilize the North American Industry Classification System (NAICS) code 333415 Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing, with a size standard of 1,250 Employees and PSC 4120 Air Conditioning Equipment.

All prospective offerors must be registered in the System for Award Management (SAM) at www.sam.gov.

Lack of SAM registration will make an offeror ineligible for award. The Unit Small Business Specialist is Mr. Greg Wemhoff, at 509-247-4880; link to USAF Small Business, http://www.airforcesmallbiz.af.mil;

link to SBA, http://sba.gov.

available for this effort. No award will be made under this solicitation until funds are available. The Government reserves the right to cancel this solicitation, either before or after the closing date. In the event the Government cancels this solicitation, the Government has no obligation to reimburse an offeror for any costs.

The contract CLIN structure is detailed below and shall be priced.

ITEM NO DESCRIPTION QTY UNIT Unit Cost Total Price

0001 Entomology Renovation Materials

HVAC

1 LOT $ $

The contractor shall provide all equipment IAW Attachment 1 - Salient Characteristics & Pricing Schedule.

*The contractor shall fill out pricing schedule within Attachment 1

*The contractor shall include all shipping costs required to provide the above-mentioned unit to Fairchild AFB, WA

Delivery: ________

Firm Fixed Price

FOB: Destination

Supplies/ Services will be inspected/accepted at:

CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

0001 Destination Government Destination Government

Delivery Information

CLIN DELIVERY DATE QTY SHIP TO ADDRESS DODAAC

Period of Performance

________ days ADC

LOT

92 CES will coordinate delivery after award.

92 CES

F1X301

Notice to Offeror(s): The Government reserves the right to cancel this RFQ, either before or after the closing date. In the event the Government cancels this RFQ, the Government has no obligation to reimburse an offeror for any costs.

FAR Provision 52.212-1, Instruction to Offerors Commercial Products and Commercial Services (Sep 2023), applies to this acquisition and is incorporated by reference. As prescribed in FAR 12.301(c), the following addendum is provided for this solicitation:

Addendum FAR 52.212-1, Instructions to Offerors Commercial Products and Commercial Services:

NOTE: All headings in bold are referencing back to the basic provision 52.212-1.

To assure timely and equitable evaluation of the quote, offerors must follow the instructions provided in FAR 52.212-1 and are required to meet all solicitation requirements, failure to meet a requirement may contained within this solicitation are prescribed IAW the FAR and are not subject to conditionally proposed revisions or changes requested by offerors.

Paragraph (b); in addition to the required information provide the following with your quote:

Subparagraph (6); Complete the CLIN structure provided above.

Subparagraph (8); All offerors must be registered and active in the System for Award Management (SAM) at https://www.sam.gov/portal/public/SAM/ at time of quote submittal to be considered for award. Offerors must complete all necessary fill-ins and certifications in the on- line Representations and Certifications and return the provision Federal Acquisition Regulation (FAR) 52.212-3, Offeror Representations and Certifications Commercial Items para (b) along with the quote.

UEI Number/Cage Code: /

Number of Employees/Total Yearly Revenue: / /

Paragraph (c); first sentence revised as follows: The offeror agrees to hold the prices in its quote firm until 30 September 2025 from the date specified for receipt of quotes, unless another time period is specified in an addendum to the quote.

Paragraph (f); Quotes must be sent as stated below, if provided by any other method, incomplete, or missing required items may not be considered. If submitting via email, it is recommended a read/delivery receipt is attached to the email.

Questions pertaining to this RFQ are due by 14 July 2025 / 10:00 AM PT

Email Questions to: SSgt Mimi Robertson Lake at mimi.robertson_lake@us.af.mil and SSgt Patrick Rangel at patrick.rangel@us.af.mil.

RFQ due date/time: 18 July 2025 / 10:00 AM PT

Email RFQ to: SSgt Mimi Robertson Lake at mimi.robertson_lake@us.af.mil and SSgt Patrick Rangel at patrick.rangel@us.af.mil.

Mail/Hand deliver to: ATTN: SSgt Mimi Robertson Lake or SSgt Patrick Rangel

92d Contracting Squadron

110 W Ent Street

Fairchild AFB, WA 99011

Note: If quotes are mailed or hand delivered, an electronic version of all documents must be provided at not go through government email systems. Emails over 10 MB in size will not come through the system.

Paragraph (g); Interchanges: The government intends to award a contract without Interchanges with respective offerors. The government, however, reserves the right to conduct Interchanges, with all, some, or none of the offerors, if deemed in its best interest.

FAR Provision 52.212-2, Evaluation- Commercial Products and Commercial Services. (2021-11)

(a) Pursuant to FAR 12.602 contract award will be made using Simplified Acquisition Procedures IAW FAR Part 13. The government will award a contract resulting from this RFQ to the responsible offeror whose quote, conforming to the RFQ, will be most advantageous to the government, price and other factors considered. The following factors shall be used to evaluate quotes:

i. Price

ii. SPRS IAW DFARS 252.204-7024

IAW FAR 12.602(a): When using the simplified acquisition procedures in Part 13, contracting officers are not required to describe the relative importance of evaluation factors.

(b) Options. The government DOES NOT intend to incorporate options.

(c) The government intends to issue a firm fixed price from this solicitation.

(d) A written notice of award or acceptance of a quote, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the quote, shall result in a binding contract without quote (or part of a quote), whether or not there are interchanges after its receipt, unless a written notice of withdrawal from the offeror is received before the award.

Note: The offeror acknowledges that should the quote terms and conditions and/or agreement conflict with mandatory provisions of the Federal Acquisition Regulation (FAR) and other Federal law applicable to commercial acquisitions, to the extent of such conflict the FAR and Federal law govern and conflicting offeror terms and conditions and/or agreement are unenforceable and are not considered incorporated into any resultant contract.

52.252-1 Solicitation Provisions Incorporated By Reference (1998-02)

This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quote or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quote or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es): https://www.acquisition.gov

(End of Provision)

52.252-2 Clauses Incorporated by Reference. (1998-02)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es): https://www.acquisition.gov

52.252-5 Authorized Deviations in Provisions. (2020-11)

(a) The use in this solicitation of any Federal Acquisition Regulation (48 CFR Chapter 1) provision with an authorized deviation is indicated by the addition of "(DEVIATION)" after the date of the provision.

(b) The use in this solicitation of any FAR and DFARS (48 CFR _Chapter 99) provision with an authorized deviation is indicated by the addition of "(DEVIATION)" after the name of the regulation.

52.252-6 Authorized Deviations in Clauses. (2020-11)

(a) The use in this solicitation or contract of any Federal Acquisition Regulation (48 CFR Chapter1) clause with an authorized deviation is indicated by the addition of (DEVIATION) after the date of the clause.

(b) The use in this solicitation or contract of any FAR and DFARS. (48 CFR _Chapter 99) clause with an authorized deviation is indicated by the addition of (DEVIATION) after the name of the regulation.

(End of clause)

PROVISIONS/CLAUSES INCORPORATED BY REFERENCE

CLAUSE NO. CLAUSE TITLE DATE

52.204-7 System for Award Management. 2024-11

52.204-13 System for Award Management Maintenance. 2018-10

52.204-16 Commercial and Government Entity Code Reporting. 2020-08

52.204-18 Commercial and Government Entity Code Maintenance. 2020-08

52.204-19 Incorporation by Reference of Representations and Certifications

2014-12

52.204-22 Alternative Line Item Proposal 2017-01

52.204-29 Federal Acquisition Supply Chain Security Act Orders Representation and Disclosures.

2023-12

52.211-6 Brand Name or Equal 1999-08

52.212-1 Instructions to Offerors-Commercial Items. 2023-09

52.212-4 Contract Terms and Conditions-Commercial Items. 2023-11

52.232-39 Unenforceability of Unauthorized Obligations 2013-06

252.203-7000 Requirements Relating to Compensation of Former DoD Officials

2011-09

252.203-7002 Requirement to Inform Employees of Whistleblower Rights.

2022-12

252.203-7005 Representation Relating to Compensation of Former DoD Officials.

2022-09

252.204-7003 Control of Government Personnel Work Product. 1992-04

252.204-7008 Compliance with Safeguarding Covered Defense Information Controls

2016-10

252.204-7014 Limitations on the Use or Disclosure of Information by Litigation Support Contractors

2023-01

252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support

2023-01

252.204-7016 Covered Defense Telecommunications Equipment or Services Representation

2019-12

252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services

2023-01

252.215-7013 Supplies and Services Provided by Nontraditional Defense Contractors.

2023-01

252.223-7006 Prohibition on Storage, Treatment, and Disposal of Toxic or Hazardous Materials.

2014-09

252.223-7008 Prohibition of Hexavalent Chromium 2023-01

252.225-7001 Buy American and Balance of Payments Program--Basic 2024-02

252.225-7002 Qualifying Country Sources as Subcontractors. 2022-03

252.225-7048 Export-Controlled Items. 2013-06

252.225-7055 Representation Regarding Business Operations with the Maduro Regime

2022-05

252.225-7056 Prohibition Regarding Business Operations with the Maduro Regime

2023-01

252.225-7059 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region Representation

2023-06

252.225-7060 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region

2023-06

252.232-7003 Electronic Submission of Payment Requests and Receiving Reports

2018-12

252.232-7010 Levies on Contract Payments. 2006-12

252.232-7011 Payments in Support of Emergencies and Contingency Operations

2013-05

252.237-7010 Prohibition on Interrogation of Detainees by Contractor Personnel

2023-01

252.243-7001 Pricing of Contract Modifications. 1991-12

252.244-7000 Subcontracts For Commercial Items 2023-11

252.247-7023 Transportation of Supplies by Sea 2023-01

PROVISIONS/CLAUSES INCORPORATED BY FULL TEXT

52.204-24 Representation Regarding Certain Telecommunications and (2021-11) Video Surveillance Services or Equipment

The Offeror shall not complete the representation at paragraph (d)(1) of this provision if the Offeror has represented that it "does not provide covered telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument" in paragraph (c)(1) in the provision at 52.204-26, Covered Telecommunications Equipment or Services Representation, or in paragraph (v)(2)(i) of the provision at 52.212-3, Offeror Representations and Certifications-Commercial Products or Commercial Services. The Offeror shall not complete the representation in paragraph (d)(2) of this provision if the Offeror has represented that it "does not use covered telecommunications equipment or services, or any equipment, system, or service that uses covered telecommunications equipment or services" in paragraph (c)(2) of the provision at 52.204-26, or in paragraph (v)(2)(ii) of the provision at 52.212-3.

(a) Definitions. As used in this provision

Backhaul, covered telecommunications equipment or services, critical technology, interconnection arrangements, reasonable inquiry, roaming, and substantial or essential component have the meanings provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

(b) Prohibition. (1) Section 889(a)(1)(A) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L. 115-232) prohibits the head of an executive agency on or after August 13, 2019, from procuring or obtaining, or extending or renewing a contract to procure or obtain, any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. Nothing in the prohibition shall be construed to

(i) Prohibit the head of an executive agency from procuring with an entity to provide a service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or

(ii) Cover telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles.

(2) Section 889(a)(1)(B) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L. 115-232) prohibits the head of an executive agency on or after August 13, 2020, from entering into a contract or extending or renewing a contract with an entity that uses any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. This prohibition applies to the use of covered telecommunications equipment or services, regardless of whether that use is in performance of work under a Federal contract. Nothing in the prohibition shall be construed to

(i) Prohibit the head of an executive agency from procuring with an entity to provide a service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or

(ii) Cover telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles.

(c) Procedures. The Offeror shall review the list of excluded parties in the System for Award Management (SAM) (https://www.sam.gov) for entities excluded from receiving federal awards for "covered telecommunications equipment or

(d) Representation. The Offeror represents that

(1) It [ ] will, [ ] will not provide covered telecommunications equipment or services to the Government in the performance of any contract, subcontract or other contractual instrument resulting from this solicitation. The Offeror shall provide the additional disclosure information required at paragraph (e)(1) of this section if the Offeror responds "will" in paragraph (d)(1) of this section; and

(2) After conducting a reasonable inquiry, for purposes of this representation, the Offeror represents that

It [ ] does, [ ] does not use covered telecommunications equipment or services, or use any equipment, system, or service that uses covered telecommunications equipment or services. The Offeror shall provide the additional disclosure information required at paragraph (e)(2) of this section if the Offeror responds "does" in paragraph (d)(2) of this section.

(e) Disclosures. (1) Disclosure for the representation in paragraph (d)(1) of this provision. If the Offeror has responded "will" in the representation in paragraph (d)(1) of this provision, the Offeror shall provide the following information as part of the offer:

(i) For covered equipment

(A) The entity that produced the covered telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the original equipment manufacturer (OEM) or a distributor, if known);

(B) A description of all covered telecommunications equipment offered (include brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); and

(C) Explanation of the proposed use of covered telecommunications equipment and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(1) of this provision.

(ii) For covered services

(A) If the service is related to item maintenance: A description of all covered telecommunications services offered (include on the item being maintained: Brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); or

(B) If not associated with maintenance, the Product Service Code (PSC) of the service being provided;

and explanation of the proposed use of covered telecommunications services and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(1) of this provision.

(2) Disclosure for the representation in paragraph (d)(2) of this provision. If the Offeror has responded "does" in the representation in paragraph (d)(2) of this provision, the Offeror shall provide the following information as part of the offer:

(i) For covered equipment

(A) The entity that produced the covered telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the OEM or a distributor, if known);

(B) A description of all covered telecommunications equipment offered (include brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); and

(C) Explanation of the proposed use of covered telecommunications equipment and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(2) of this provision.

(ii) For covered services

(A) If the service is related to item maintenance: A description of all covered telecommunications services offered (include on the item being maintained: Brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); or

(B) If not associated with maintenance, the PSC of the service being provided; and explanation of the proposed use of covered telecommunications services and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(2) of this provision.

(End of provision)

52.204-26 Covered Telecommunications Equipment or Services-Representation (2020-10)

(a) Definitions. As used in this provision, "covered telecommunications equipment or services" and "reasonable inquiry" have the meaning provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

(b) Procedures. The Offeror shall review the list of excluded parties in the System for Award Management (SAM) (https://www.sam.gov) for entities excluded from receiving federal awards for "covered telecommunications equipment or services".

(c) (1) Representation. The Offeror represents that it [ ] does, [ ] does not provide covered telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument.

(2) After conducting a reasonable inquiry for purposes of this representation, the offeror represents that it [ ] does, [ ] does not use covered telecommunications equipment or services, or any equipment, system, or service that uses covered telecommunications equipment or services.

52.212-3 Offeror Representations and Certifications Commercial Products and Commercial

Services (MAR 2025) (DEVIATION 2025-O0004)

Offeror Representations and Certifications Commercial Products and Commercial Services (Feb 2024)

Alternate I (Feb 2024). As prescribed in 12.301 (b)(2), add the following paragraph (c)(12) to the basic provision:

(12) (Complete if the offeror has represented itself as disadvantaged in paragraph (c)(5) of this provision.)

Black American.

Hispanic American.

Native American (American Indians, Eskimos, Aleuts, or Native Hawaiians).

Asian-Pacific American (persons with origins from Burma, Thailand, Malaysia, Indonesia, Singapore, Brunei, Japan, China, Taiwan, Laos, Cambodia (Kampuchea), Vietnam, Korea, The Philippines, Republic of Palau, Republic of the Marshall Islands, Federated States of Micronesia, the Commonwealth of the Northern Mariana Islands, Guam, Samoa, Macao, Hong Kong, Fiji, Tonga, Kiribati, Tuvalu, or Nauru).

Subcontinent Asian (Asian-Indian) American (persons with origins from India, Pakistan, Bangladesh, Sri Lanka, Bhutan, the Maldives Islands, or Nepal).

Individual/concern, other than one of the preceding.

52.212-5 Contract Terms and Conditions Required To Implement Statutes or Executive Orders Commercial Products and Commercial Services (MAR 2025) (DEVIATION 2025-O0004)

252.204-7024 Notice on the Use of the Supplier Performance Risk System (Mar 2023)

(a) Definitions. As used in this provision resulting in safety issues, mission degradation, or monetary loss.

service is consistent with historical prices paid for that item or service.

unsuccessful performance or to supply chain risk (see Defense Federal Acquisition Regulation Supplement 239.7301).

(b) The Supplier Performance Risk System (SPRS), available at https://piee.eb.mil/, will be used in the contractor information on contracts from Government reporting systems in order to develop risk assessments.

(c) The Contracting Officer will consider SPRS risk assessments during the evaluation of quotations or offers received in response to this solicitation as follows:

(1) Item risk will be considered to determine whether the procurement represents a high performance risk to the Government.

(2) Price risk will be considered in determining if a proposed price is consistent with historical prices paid for a product or a service or otherwise creates a risk to the Government.

(3) Supplier risk, including but not limited to quality and delivery, will be considered to assess the risk of unsuccessful performance and supply chain risk.

(d) SPRS risk assessments are generated daily. Quoters or Offerors are able to access their risk assessments by following the access instructions in the SPRS user's guide available at https://www.sprs.csd.disa.mil/reference.htm. Quoters and Offerors are granted access to SPRS for their own risk assessment classifications only. SPRS reporting procedures and risk assessment methodology are detailed in the SPRS user's guide. The method to challenge a rating generated by SPRS is also provided in the user's guide. SPRS evaluation criteria are available at https://www.sprs.csd.disa.mil/pdf/SPRS_DataEvaluationCriteria.pdf.

(e) The Contracting Officer may consider any other available and relevant information when evaluating a quotation or an offer.

(End of Provision)

252.204-7017 Prohibition on the Acquisition of Covered Defense (2021-05) Telecommunications Equipment or Service Representation.

The Offeror is not required to complete the representation in this provision if the Offeror has represented in the provision at 252.204-7016 , Covered Defense Telecommunications Equipment or Services services as a part of its offered products or services to the Government in the performance of any contract,

(a) Definitions meanings given in the 252.204-7018 clause, Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services, of this solicitation.

(b) Prohibition. Section 1656 of the National Defense Authorization Act for Fiscal Year 2018 (Pub.

L. 115-91) prohibits agencies from procuring or obtaining, or extending or renewing a contract to procure or obtain, any equipment, system, or service to carry out covered missions that uses covered defense telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system.

(c) Procedures. The Offeror shall review the list of excluded parties in the System for Award Management (SAM) at https://www.sam.gov for entities that are excluded when providing any equipment, system, or service to carry out covered missions that uses covered defense telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system, unless a waiver is granted.

Representation. If in its annual representations and certifications in SAM the Offeror has represented in paragraph (c) of the provision at 252.204-7016 , Covered Defense Telecommunications Equipment or Services services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument, then the Offeror shall complete the following additional representation:

The Offeror represents that it [ ] will [ ] will not provide covered defense telecommunications equipment or services as a part of its offered products or services to DoD in the performance of any award resulting from this solicitation.

(e) Disclosures provide information as part of the offer:

(1) A description of all covered defense telecommunications equipment and services offered (include brand or manufacturer; product, such as model number, original equipment manufacturer (OEM) number, manufacturer part number, or wholesaler number; and item description, as applicable).

(2) An explanation of the proposed use of covered defense telecommunications equipment and services and any factors relevant to determining if such use would be permissible under the prohibition referenced in paragraph (b) of this provision.

(3) For services, the entity providing the covered defense telecommunications services (include entity name, unique entity identifier, and Commercial and Government Entity (CAGE) code, if known).

(4) For equipment, the entity that produced or provided the covered defense telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the OEM or a distributor, if known).

252.211-7003 Item Unique Identification and Valuation (2023-01)

(a) Definitions. As used in this clause encoded on machine-readable media.

(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or

(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number; and serial number within the original part, lot, or batch number.

-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards Organization (ISO)/International Electrotechnical Commission (IEC) 16022.

field that defines the general category or intended use of the data that follows.

commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html .

identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number.

identifiers to items.

(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;

(2) For cost-burdened unit cost to the Government at the time of delivery; and

(3) For items produced under a time-and-unit cost to the Government at the time of delivery.

enterprise, as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459.

enterprise identifier.

components, or constituent parts.

items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions.

memory buttons, radio frequency identification, or optical memory cards.

creation to a class of items with the same form, fit, function, and interface.

item with a unique item identifier or DoD recognized unique identification equivalent.

assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise.

by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment.

is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier.

number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier.

end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto.

unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent.

has been used. The current list of accepted unique item identifier types is maintained at https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html .

(b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item.

(c) Unique item identifier.

(1) The Contractor shall provide a unique item identifier for the following:

following line items:

Contract Line, Subline, or

Exhibit Line Item Number Item Description

Schedule or the following table:

Contract Line, Subline, or

Exhibit Line Item Number Item Description

(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number ____.

(iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number ____.

(v) Any item not included in (i), (ii), (iii), or (iv) for which the contractor creates and marks a unique item identifier for traceability.

(2) The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item Unique Identification Registry by the contractor.

(3) The unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC International Standard 16022, Information technology International symbology specification Data matrix; ECC200 data matrix specification.

(4) Data syntax and semantics of unique item identifiers. The Contractor shall ensure that

(i) The data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following three types of data qualifiers, as determined by the Contractor:

(A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with the Air Transport Association Common Support Data Dictionary; and

(ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology Transfer Syntax for High Capacity Automatic Data Capture Media.

(5) Unique item identifier.

(i) The Contractor shall

(A) Determine whether to

(1) Serialize within the enterprise identifier;

(2) Serialize within the part, lot, or batch number; or

(3) Use a DoD recognized unique identification equivalent (e.g. Vehicle Identification Number); and

(B) Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in MIL-STD-130, Identification Marking of U.S. Military Property, latest version;

(C) Label shipments, storage containers and packages that contain uniquely identified items in accordance with the requirements of MIL-STD-129, Military Marking for Shipment and Storage, latest version; and

(D) Verify that the marks on items and labels on shipments, storage containers, and packages are machine readable and conform to the applicable standards. The contractor shall use an automatic identification technology device for this verification that has been programmed to the requirements of Appendix A, MIL-STD-130, latest version.

(ii) The issuing agency code

(A) Shall not be placed on the item; and

(B) Shall be derived from the data qualifier for the enterprise identifier.

(d) For each item that requires item unique identification under paragraph (c)(1)(i), (ii), or (iv) of this clause or when item unique identification is provided under paragraph (c)(1)(v), in addition to the information provided as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, as part of the Material Inspection and Receiving Report, the following information:

(1) Unique item identifier.

(2) Unique item identifier type.

(3) Issuing agency code (if concatenated unique item identifier is used).

(4) Enterprise identifier (if concatenated unique item identifier is used).

(5) Original part number (if there is serialization within the original part number).

(6) Lot or batch number (if there is serialization within the lot or batch number).

(7) Current part number (optional and only if not the same as the original part number).

(8) Current part number effective date (optional and only if current part number is used).

(9) Serial number (if concatenated unique item identifier is used).

(11) Unit of measure.

(12) Type designation of the item as specified in the contract schedule, if any.

(13) Whether the item is an item of Special Tooling or Special Test Equipment.

(14) Whether the item is covered by a warranty.

(e) For embedded subassemblies, components, and parts that require DoD item unique identification under paragraph (c)(1)(iii) of this clause or when item unique identification is provided under paragraph (c)(1)(v), the Contractor shall report as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the following information:

(1) Unique item identifier of the parent item under paragraph (c)(1) of this clause that contains the embedded subassembly, component, or part.

(2) Unique item identifier of the embedded subassembly, component, or part.

(3) Unique item identifier type.**

(4) Issuing agency code (if concatenated unique item identifier is used).**

(5) Enterprise identifier (if concatenated unique item identifier is used).**

(6) Original part number (if there is serialization within the original part number).**

(7) Lot or batch number (if there is serialization within the lot or batch number).**

(8) Current part number (optional and only if not the same as the original part number).**

(9) Current part number effective date (optional and only if current part number is used).**

(10) Serial number (if concatenated unique item identifier is used).**

(11) Description.

** Once per item.

(f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows:

(1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at 252.232-7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site/uidregistry/.

(2) Embedded items shall be reported by one of the following methods

(i) Use of the embedded items capability in WAWF;

(ii) Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site/uidregistry/; or

(iii) Via WAWF as a deliverable attachment for exhibit line item number (fill in) ___, Unique Item Identifier Report for Embedded Items, Contract Data Requirements List, DD Form 1423.

(g) Subcontracts. If the Contractor acquires by subcontract any item(s) for which item unique identification is required in accordance with paragraph (c)(1) of this clause, the Contractor shall include this clause, including this paragraph (g), in the applicable subcontract(s), including subcontracts for commercial products or commercial services.

252.225-7001 Buy American- Balance of Payments Program Certificate-Basic (2024-02)

BUY AMERICAN BALANCE OF PAYMENTS PROGRAM CERTIFICATE BASIC (FEB 2024)

(a) Definitions -the-have the meanings given in the 252.225-7001, Buy American and Balance of Payments Program Basic clause of this solicitation.

(b) Evaluation. The Government

(1) Will evaluate offers in accordance with the policies and procedures of Part 225 of the Defense Federal Acquisition Regulation Supplement; and

(2) Will evaluate offers of qualifying country end products without regard to the restrictions of the Buy American statute or the Balance of Payments Program.

(c) Certifications and identification of country of origin.

(1) For all line items subject to the Buy American and Balance of Payments Program Basic clause of this solicitation, the Offeror certifies that

(i) Each end product, except those listed in paragraphs (c)(2) or (3) of this provision, is a domestic end product and that each domestic end product listed in paragraph (c)(4) of this provision contains a critical component or a critical item; and

(ii) For end products other than COTS items, components of unknown origin are considered to have been mined, produced, or manufactured outside the United States or a qualifying country. For those end products that do not consist wholly or predominantly of iron or steel or a combination of both, the Offeror shall also indicate whether these foreign end products exceed 55 percent domestic content, except for those that are COTS items. If the percentage of the domestic content is unknown,

(2) The Offeror certifies that the following end products are qualifying country end products:

Line Item Number Country of Origin

(3) The following end products are other foreign end products, including end products manufactured in the United States that do not qualify as domestic end products. For those foreign end products that do not consist wholly or predominantly of iron or steel or a combination of both, the Offeror shall also indicate whether these foreign end products exceed 55 percent domestic content, except for

Line Item Number Country of Origin (If known)

Exceeds 55% Domestic Content (yes/no)

(4) The Offeror shall separately list the line item numbers of domestic end products that contain a critical component or a critical item (see Federal Acquisition Regulation 25.105).

Domestic end products containing a critical component or a critical item:

Line Item Number _________________________________________________

[List as necessary]

252.232-7006 Wide Area WorkFlow Payment Instructions. (2023-01)

(a) Definitions. As used in this clause-

Department of Defense Activity Address Code (DoDAAC) is a six position code that uniquely identifies a unit, activity, or organization.

Document type means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

Local processing office (LPO) is the office responsible for payment certification when payment certification is done external to the entitlement system.

Payment request and receiving report are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) Electronic invoicing. The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall-

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the Web Based Training link on the WAWF home page at https://wawf.eb.mil/

(e) WAWF methods of document submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF for this contract or task or delivery order:

(1) Document type. The Contractor shall submit payment requests using the following document type(s):

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

Invoice and Receiving Report (Combo)

(B) For services that do not require shipment of a deliverable submit the applicable invoice and receiving report, as specified by the Contracting Officer.

N/A

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial item financing, submit a commercial item financing request.

(2) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

[Note: The Contractor may use a WAWF combo document type to create some combinations of invoice and receiving report in one step.]

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*

CLIN 0001 FOR Fairchild AFB

Field Name in WAWF Data to be entered in WAWF

Pay Official DoDAAC F87700

Issue By DoDAAC FA4620

Admin DoDAAC FA4620

Ship To Code F1X301

Service Acceptor (DoDAAC)

F1X301

(4) Payment request. The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) Receiving report. The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F.

(f) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting a

SSgt Mimi Robertson Lake, 509-247-4862, mimi.robertson_lake@us.af.mil

Aleesha Roedel, 509-321-3646, aroedel@greaterspokane.org

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.

(End of Clause)

5352.201-9101 Ombudsman. (2019-10)

(a) An ombudsman has been appointed to hear and facilitate the resolution of concerns from offerors, potential offerors, and others for this acquisition. When requested, the ombudsman will maintain strict confidentiality as to the source of the concern. The existence of the ombudsman does not affect the authority of the program manager, contracting officer, or source selection official. Further, the ombudsman does not participate in the evaluation of quotes, the source selection process, or the adjudication of protests or formal contract disputes. The ombudsman may refer the interested party to another official who can resolve the concern.

(b) Before consulting with an ombudsman, interested parties must first address their concerns, issues, disagreements, and/or recommendations to the contracting officer for resolution. Consulting an ombudsman does not alter or postpone the timelines for any other processes (e.g., agency level bid protests, GAO bid protests, requests for debriefings, employee-employer actions, contests of OMB Circular A-76 competition performance decisions).

(c) If resolution cannot be made by the contracting officer, the interested party may contact the ombudsman, Mrs. Susan Madison, AFICC OL AMC, 510 POW/MIA, Scott AFB, IL 62225-5022, 618- 229-0267 fax 618-256-5724, email: susan.madison@us.af.mil. Concerns, issues, disagreements, and recommendations that cannot be resolved at the Center/MAJCOM/DRU/SMC ombudsman level, may be brought by the interested party for further consideration to the Air Force ombudsman, Associate Deputy Assistant Secretary (ADAS) (Contracting), SAF/AQC, 1060 Air Force Pentagon, Washington DC 20330- 1060, phone number (571) 256-2395, facsimile number (571) 256-2431.

(d) The ombudsman has no authority to render a decision that binds the agency.

(e) Do not contact the ombudsman to request copies of the solicitation, verify offer due date, or clarify technical requirements. Such inquiries shall be directed to the contracting officer.

5352.223-9000 Elimination of Use of Class I Ozone Depleting Substances (ODS). (2019-10)

(a) Contractors shall not:

(1) Provide any service or product with any specification, standard, drawing, or other document that requires the use of a Class I ODS in the test, operation, or maintenance of any system, subsystem, item, component, or process; or

(2) Provide any specification, standard, drawing, or other document that establishes a test, operation, or maintenance requirement that can only be met by use of a Class I ODS as part of this contract/order.

[Note: This prohibition does not apply to manufacturing.]

(b) For the purposes of Air Force policy, the following products that are pure (i.e., they meet the relevant product specification identified in AFI 32-7086) are Class I ODSs:

(1) Halons: 1011, 1202, 1211, 1301, and 2402;

(2) Chlorofluorocarbons (CFCs): CFC-11, CFC-12, CFC-13, CFC-111, CFC-112, CFC-113, CFC-114, CFC-115, CFC-211, CFC-212, CFC-213, CFC-214, CFC-215, CFC-216, and CFC-217, and the blends R- 500, R-501, R-502, and R-503; and

(3) Carbon Tetrachloride, Methyl Chloroform, and Methyl Bromide.

[NOTE: Material that uses one or more of these Class I ODSs as minor constituents do not meet the Air

Force definition of a Class I ODS.]

Attachments:

Attachment 1: Salient Characteristics & Pricing Schedule