SOW Security Cages.pdf

Statement of Work

A three-room security cage, each room must have hinged doors with a 5 digit key pad and push handle exits and one (1) 6’x8’ Security Cage with keyed lock specifications. Please see the blue outlined items in the image on the next page for more information.

The contractor is responsible for providing all materials and equipment necessary to install the security cages. Government items and equipment will be removed by the government.

Make: Nonspecific Model: Nonspecific

Minimum Specifications

• Must be exact dimensions due to building structural supports

• Exterior dimensions 45’ by 22’10”

• 22’10” interior wall at 15’4” from left side of cage

• 15’4” interior wall located in middle of the left side of cage

• Hinged door with 5 digit key pad/push handle exit located 5’10” from top of left side of cage

• Hinged door with 5 digit key pad/push handle exit located 5’10” from bottom left of cage

• Hinged door with 5 digit key pay/push handle exit located 3’ from top right of cage.

• Sliding door with keyed lock located 3’10” from right bottom side of cage

• Concrete mounting hardware for cage structure

• Contractor shall provide diagram to ensure proper fitting of building

• Contractor shall provide installation.

The sliding door with keyed lock needs to be the same width as this overhead door.

The small square dots on the blueprint represent these steel support beams.

This is an example what the kind of cages we DO NOT want.