ATTACHMENT_1_-_REVISION_-_Jack_Stand_Tester_Salient_Characteristics.pdf
PDF 703 KB Posted
- Attached to
- FA441918T01000001 Jack Stand Tester Federal contract opportunity
- Solicitation number
- FA441918T0100
About this file
ATTACHMENT 1 - REVISION - Jack Stand Tester Salient Characteristics
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| FA441918T010002_Delivery_Address_Amendment.pdf | ||
| FA441918T0100001_Amendment_Jack_Stand_Tester.pdf | ||
| Attachment_1_-_Jack_Stand_Tester_-_Salient_Characteristics.pdf | ||
| FA441918T0100_Solicitation.pdf | ||
| Attachment_2_-_97_AMW_AT_Awareness_for_Contractors.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
ATTACHMENT 1 - REVISION - DATED 13 DECEMBER 2017 - Jack Stand Tester Salient Characteristics
• 0-150 Ton Capacity – test axle and tripod jacks in any position
• Capable of testing jacks with heights ranging from 18” – 252” (inches)
• Cross Beam – supports electrical hoist
• Power requirements – 110 VAC, 1 Phase, 50/60 Hertz
• Electrical Hoist to raise and lower adjustable load beam
• Adjustable Load Beam – in increments of 10 inches and painted high-visibility yellow
• Minimum of 108” (incles) between vertical supports
• Electronic Load Cell housed within adjustable load beam
• Electronic Digital Read-Out and Control Box – provides digital read-out of load. Controls the raising and lowering of adjustable load beam.
• Watertight enclosure for electronic digital read-out and control box
• Two (2) Columns with Ladders and Safety Harnesses provide access to adjustable load beam locking pins
• Ability to check the jack ram assembly and the jack structure simultaneously
• Finish – Skyfrol Resistant Paint
JACK STAND TESTER
FA441918T0100P0001
File details come from the government source that posted it.