Attachment_1_-_Jack_Stand_Tester_-_Salient_Characteristics.pdf
PDF 77 KB Posted
- Attached to
- FA441918T01000001 Jack Stand Tester Federal contract opportunity
- Solicitation number
- FA441918T0100
About this file
Attachment 1 - Salient Characteristics
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| FA441918T010002_Delivery_Address_Amendment.pdf | ||
| ATTACHMENT_1_-_REVISION_-_Jack_Stand_Tester_Salient_Characteristics.pdf | ||
| FA441918T0100001_Amendment_Jack_Stand_Tester.pdf | ||
| FA441918T0100_Solicitation.pdf | ||
| Attachment_2_-_97_AMW_AT_Awareness_for_Contractors.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Jack Stand Tester Salient Characteristics
• 150 Ton Capacity – test axle and tripod jacks in any position
• Cross Beam – supports electrical hoist
• Power requirements – 110 VAC, 1 Phase, 50/60 Hertz
• Electrical Hoist to raise and lower adjustable load beam
• Adjustable Load Beam – in increments of 10 inches and painted high-visibility yellow
• Electronic Load Cell housed within adjustable load beam
• Electronic Digital Read-Out and Control Box – provides digital read-out of load. Controls the raising and lowering of adjustable load beam.
• Two (2) Columns with Ladders and Safety Harnesses provide access to adjustable load beam locking pins
• Finish – Skyfrol Resistant Paint
Must be able to :
1. Check the jack ram assembly and the jack structure simultaneously.
2. Be able to test jacks up to a height of 21 feet.
3. Test jacks as low as 18 inches.
4. Have a minimum of 90 inches between the vertical supports.
5. Have a load capability of 0-150 tons.
6. Have an electric hoist to position the cross-beam.
7. Have integral fall protection for safety of personnel when adjusting the height of the cross-beam.
File details come from the government source that posted it.