NAVCONBRIG_Plasma_Cutter_(SOW).doc

STATEMENT OF WORK

CNC Plasma Cutter Joint Base Charleston, SC

29 August 2018

I. GENERAL OVERVIEW

This Statement of Work (SOW) establishes the minimum requirements for the acquisition and installation of one 5’0”x 10’0” CNC plasma cutter and associated equipment for the NAVCONBRIG at Joint Base Charleston Air, SC.

II. SPECIFICATIONS

A. 5’0”x10’0” CNC Plasma Cutter

1. Contractor shall provide and install a completely turnkey fully assembled plasma cutter.

2. At a minimum, the plasma cutter and accessories shall possess the following specifications:

a. Automatic height detection

b. Unit must be a minimum 5’0”x10’0”

c. X, Y, and Z axes control & motor operation

d. Unit must include CAD-Cam Express or equivalent software

e. Unit must include a user’s manual, power cords, and other support components

f. Maximum table capacity 1.5”

g. Unit must be able to perform bevel cutting

h. Unit must include a water table

i. Minimum 1 year warranty

B. Installation and Training

1. The vendor shall incorporate training and installation to include:

a) Onsite installation

b) Onsite training

i. Training on safety, set-up, maintenance, and operation.

c) Tech support (phone & email)

2. The contractor must comply with all OSHA Safety regulations during the performance of this order.

C. Freight, Delivery & Set-up

a) Freight FOB Joint Base Charleston, SC

b) Delivery and unload will have to be coordinated with install.

**End of Statement of Work**