Attachment 1 Amended.pdf

Delivery

1 ea. temp. controlled at JBSA- Lackland Building 7385 (delivery only during business hours 0700-1500)

1 ea temp. controlled at JBSA-Sam Houston Building 4060 (delivery only during business hours 0700-1500)

1 ea temp. controlled at JBSA-Randolph Building 37 (delivery only during business hours 0700-1500)

And 4 ea Chemical storage Conex Box at JBSA-Sam Houston Building 4060 (delivery only during business hours 0700-1500)

Salient Characteristics

(4) Chemical Storage Conex Boxes Nominal Ext. Dimensions 20'L X 6'W X 10'H Sump Capacity (Gal): 300 8P Swinging Door Set (Front and Rear Wall) 8P Upper Tier Secondary Containment 8P Galvanized Steel Grating, Per Tier

STANDARD FEATURES

- Exterior Wall Construction: Noncombustible steel sheets attached to corrosion-protected structural steel tubing for maximum durability and weather resistance.

- Roof/Ceiling: Noncombustible continuously welded steel sheets attached to structural steel tubing. Corrosion protected for maximum durability and weather resistance

- Sump Wall Construction: Noncombustible continuously welded sheet sheets for maximum spill containment Protection

- Upper Tier Secondary Containment, P-Series

- Base of Unit: Open channel construction providing visual Inspection.

- Swinging Doors - P-Series (Outward Swinging, Padlockable,

- Safety Chains (when optional doors are not ordered)

- Steel pallet loading supports (3 per pallet), corrosion-protected for maximum durability and weather resistance

- One (1) exterior static grounding connection

- Built-in 6-inch deep secondary containment sump on bottom level with chemical-resistant coating

- Interior & Exterior Primer Coat: high solids chemical-resistant epoxy (white semigloss)

- Interior & Exterior Finish: high solids gloss-white aliphatic Polyurethane

- Four (4) Hold-down Brackets

(3) Temperature controlled Chemical Storage Conex Boxes 8L x 8W x 9H "S" Series Storage Building 1 Door 60 In. W X 80 In. H Sump Capacity (Gal): 191-200 R 10 Insulation

502 CONS/JBKAA

JBSA Lackland, TX FA301620U0103 Chemical Storage Conex Boxes

Attachment 1 1 of 2

- 1.00 R10 Insulation, Double Door (Fire-Rated & Noncombustible Steel Models)

- 1.00 Load Center, Single Phase (Nema R); - UL Listed,208 /120 V or240 / 120 V, single-phase load center (NEMA R) with circuit breaker(s) and main breaker.

- 1.00 Air Conditioners (Class I, Division 2 Grp A-D), UL and cUL Listed,14,500 / 14,000

(BTU/hr), 230/ 208V

- 1.00 Heater (Convection, 7.6 kW,240 / 208 V,1 -Phase, 24,000 BTU/HR) (Explosion-

Proof) (Class I, Division 1 Groups C&D)

- 1.00 Exhaust Ventilation, Exterior Low Mount (Explosion Proof) (Class I, Division 1

Groups C&D) with Snap-Type Switch (Non Explosion-Proof)

- 1.00 Dry Chemical Fire Suppression System (Rated for Class A, B and C fires)

- 1.00 Interior Lighting ( 135 W Lamp) (Explosion-Proof) (Class I, Division 1 Groups C&D)

1 Fixture, 1 Switch

"S" Series STANDARD FEATURES:

- Exterior Wall Construction: Weatherproof unitized noncombustible steel construction

- Roof/Ceiling Construction: Weatherproof unitized noncombustible steel construction, same as exterior walls, Roof/ceiling assembly permanently attached to exterior walls.

- 60"W x 80"H, steel double door(s) located on front wall of building. Active door leaf

(36"W x 80"H) is equipped with an exterior UL Listed keyed security lock, and passive door (24"W x 80"H) is equipped with manually operated top and bottom UL Listed surface bolts. Both door leafs equipped with hold open door latches.

- Screened Air Vent(s): Air inlet vent(s) equipped with louvers and screens. The vent openings are arranged to provide air movement and prevent accumulation of hazardous vapors.

- Building Base: Open channel construction for forklift and/or crane slings and under building inspections.

- Internal Spill Containment Capacity: Minimum 30% of total storage Capacity

- Interior Finish: High solids, chemical-resistant epoxy undercoat with a heat reflective white aliphatic polyurethane topcoat.

- Exterior Finish: High solids, chemical-resistant epoxy undercoat with a heat reflective white aliphatic polyurethane topcoat.

- Four (4) Hold-down Brackets (structural steel angles) for bolting to purchaser's foundation for seismic and wind load anchoring.

- Static Grounding System: One (1) exterior grounding connection, one (1) 10-foot long

5/8" diameter copper-clad steel grounding rod, one (1) #4AWG copper conductor, and grounding lug(s).

- Signage: D.O.T. hazard classification placard with rust-proof aluminum holder & stainless steel clips; and pressure sensitive NFPA 704 Hazard Rating Sign(s)

502 CONS/JBKAA

JBSA Lackland, TX FA301620U0103 Chemical Storage Conex Boxes

Attachment 1 2 of 2