Attachment_1_(Revised_SON).pdf

FA3002-16-R-0003

Attachment 1

Counter-Improvised Explosive Device (C-IED) Training Aids Statement of Need (SON)

28 Apr 16

Background: In response to the global threat of Improvised Explosive Devices (IEDs), selected US Air Force training units are required to train and ensure all Airmen know how to identify, react, and properly respond to IEDs. The training is executed at numerous CONUS and OCONUS locations via classroom lecture and hands-on exercises. The exercises include training scenarios conducted in surrogate villages designed to replicate the current theater of operations (i.e. – Afghanistan, Iraq, etc.). The training scenarios include role players and replicated IEDs using the same and/or similar tactics, techniques, and procedures employed by enemy combatants and insurgents. In support of this training, HQ AETC/A3QS intends to purchase Commercial-Off- The-Shelf (COTS) training aids and support equipment as listed in this Statement of Need (SON).

1.0 Item Descriptions: Our AF C-IED training sites require the most realistic replica ordnance available for use during C-IED training operations. All replica ordnance must be constructed of extremely durable materials specifically designed for producing ordnance training aids which are heavy duty and must withstand years of continued use during C-IED training operations under severe operating conditions. Additionally, these items must be inert, contain no hazardous materials and be one-person portable. Some kits and/or sets require installation by the vendor to create the look of an actual store front, restaurant, etc. Contractor shall provide the items listed below, in the estimated annual quantities listed in exhibit A.

1.1 IED Training Kits. Each kit must contain the following items: 1 each 155mm replica projectile; 1 each 155mm M1A1 South African replica projectile; 1 each 152mm USSR replica projectile; 1 each 130mm USSR replica projectile; 1 each 122mm USSR replica projectile; 1 each 107mm replica rocket; 1 each 73mm PG-9 replica rocket; 1 each PG-7 replica rocket; 1 each RKG-3 replica Anti-Tank parachute grenade; 1 each RG-42 USSR replica grenade; 1 each RGD-5 USSR replica grenade; 1 each F-1 USSR replica grenade; 1 each TC/6 Anti-Tank replica mine; 1 each VS-2.2 Anti-Tank replica mine; 1 each VS-1.6 Anti-Tank replica mine; and 1 each VS-50 AP replica mine.

Mfr: Inert Products, Model: IEDD Training Lane Kit #1 Small model number TA-IEDD1

1.2 Replica Electric Blasting Caps. Each electric blasting cap must be an exact replica, have a closed end, and have a hole drilled through the body to show that it is empty.

Mfr: Inert Products, Model: Inert, Electric Detonator Blasting Cap-Deluxe model number TA-

1.3 1000 ft Rolls of Detonation Cord. Each replica roll of detonation cord must be red in color.

Mfr: Inert Products, Model: Inert, Cord, Detonating 1000’ ft – RED model number TA-SC06

1.4 Replica Rocket Propelled Grenade Launchers. Each launcher must be an exact replica, able to load a replica rocket.

Mfr: Inert Products, Model: Inert, RPG-7 Launcher replica model number TA-RPG101

1.5 Replica PG-7 Grenades. Each rocket propelled grenade must be an exact replica to include folding fin assembly that allows RPG to be loaded into simulated launcher.

Mfr: Inert Products, Model: Inert, Replica PG-7 Rocket – COMPLETE part number TA-PG7A

1.6 Replica 82mm Soviet/Russian Mortar Rounds. Each mortar must be an exact replica.

Mfr: Inert Products, Model: Inert, Replica 82mm Russian/Soviet Mortar Round Training Aid part number TA-R82C

1.7 Replica 82mm Chinese Mortar Rounds. Each mortar must be an exact replica.

Mfr: Inert Products, Model: Inert, Replica 82mm Chinese Mortar Round Training Aid part number TA-R82C

1.8 Replica 81mm HE Mortar Rounds. Each mortar must be an exact replica.

Mfr: Inert Products, Model: Inert, Replica 81mm HE Mortar Round part number TA-2991

1.9 Replica Metal 60mm HE Mortar Rounds. Each mortar must be an exact replica.

Mfr: Inert Products, Model: Inert, Replica Metal 60mm HE Mortar Round, part number TA-2986

1.10 Replica Italian TC/6 Mines. Each replica mine must be tan in color.

Mfr: Inert Products, Model: Inert, Italian TC/6 Anti-Tank Mine Training Aid model number

OTA-TC6

1.11 Replica Italian VS50 Mines. Each replica mine must be tan in color.

Mfr: Inert Products Model: Inert, Italian VS50 Anti-Personnel Mine Training Aid model number

TA-VS9

1.12 IED Configured Using a Pressure Cooker. Each IED must be made to look like a Middle Eastern style pressure cooker typically used in the manufacture of IEDs.

Mfr: Inert Products Model: Inert, Pressure Cooker IED Training Aid (OTA-PCIED)

1.13 Replica OG-7 Grenades. Each rocket propelled grenade must be an exact replica to include folding fin assembly that allows RPG to be loaded into simulated launcher.

Mfr: Inert Products, Model: Inert, Replica OG-7 Rocket – COMPLETE part number OTA-29G7

1.14 Small Assault Squad Kit. Each kit must contain an exact inert replica of the following items: 2 each AK-47 w/Folding Stock made of 100% metal/wood, actions must work and magazines must remove; 1 each AK-47 w/Solid Stock made of 100% metal/wood, actions must work and magazines must remove; 1 each RPD Machine Gun made with steel framed durable resin and be 100% visually accurate; and 2 each Suicide Vests w/siren penalty which can be set for pressure or pressure release activation.

1.15 Small Fire Support Kit. Each kit must contain an exact inert replica of the following items:

1 each AK-47 w/Solid Stock made of 100% metal/wood, actions must work and magazines must remove; 1 each SVD Dragunov sniper rifle made with steel framed durable resin and be 100% visually accurate; 1 each RPD Machine Gun made with steel framed durable resin and be 100% visually accurate; 1 each RPK Machine Gun made with steel framed durable resin and be 100% visually accurate; 1 each PKM Machine Gun made with steel framed durable resin and be 100% visually accurate; and 2 each Suicide Vests w/siren penalty which can be set for pressure or pressure release activation.

1.16 Large Weapon Assault Kit. Each kit must contain an exact inert replica of the following items: 3 each AK-47 w/Folding Stock made of 100% metal/wood, actions must work and magazines must remove; 3 each AK-47 w/Solid Stock made of 100% metal/wood, actions must work and magazines must remove; 1 each RPG Launcher kit which includes 1 each inert RPG-7 launcher and 1 each inert PG-7 round; 2 each SVD, Dragunov sniper rifles made with steel framed durable resin and be 100% visually accurate; 3 each RPD Machine Guns made with steel framed durable resin and be 100% visually accurate; 1 each RPK Machine Gun made with steel framed durable resin and be 100% visually accurate; 2 each PKM Machine Guns made with steel framed durable resin and be 100% visually accurate; and 5 each Suicide Vests w/siren penalty which can be set for pressure or pressure release activation.

1.17 Improvised Explosive Bomb Builder Kit. Each kit must be completely inert, contain non-hazardous materials, and include each of the following: 1 each Collapsing Improvised 6ft Work Table and Legs (portable); 1 each tool bag; 1 each Ammo Can (Storage of Tools & IED Components); 1 each Large Needle Nose Hand Tool; 1 each Small Needle Nose Hand Tool; 1 each Wire Strippers Hand Tool; 1 each Soldering Iron / Solder; 1 each 24AWG Wire Spool, 500ft

– Black; 1 each 24AWG Wire Spool, 500ft – Brown; 1 each 24AWG Wire Spool, 500ft – White;

1 each Assorted AWG Speaker Wire Reel, 100ft; 5 each Dummy Cell Phones; 3 each Chinese Mechanical Washing Machine Timers; 1 each Battery Holder Assortment - 8 pcs, 1 each Battery Assortment -12 pcs (3 each 9V, 4 each AA, 4 each AAA, and 1 each 12V); 1 each Electrical Components Assortment - 100 Pcs; 1 each Improvised Switches Assortment - 12 Pcs; 3 each Electrical Tape Rolls- Black; 1 each Large Burlap Bag - IED Container; 1 each 10 lbs of Nails/Shrapnel/Frag in Container; 1 each IED Firing Devices Kit (PMRS (2-way Radio), Cell Phone, Cordless Phone, and Digital Timer in IED configuration); 10 each non-electric detonator Blasting Caps; 25 each Electric Detonator Blasting Caps; 1 each Detonating Cord 1000' ft Spool; 1 each Time Blasting Fuse 100' ft Coil; 5 each SEMTEX-H, 1 LB Blocks – Orange; 5 each 1/2 lb SEMTEX-H Bulk Simulated Material – Orange; 1 each Plastic Explosives (PE) Storage Bag (For Orange Simulant); 1 each PE Storage Bag (For Red Simulant); 10 each Arabic Dynamite Sticks;

10 each Russian Dynamite Sticks; 5 each Middle Eastern TNT Blocks; 3 each IED, Replica TC/6 Anti-Tank Mine with Steel Can Booby-trap; 1 each IED Pressure Cooker; 1 each IED PE Bag with High Explosive (HE) Charge; 1 each IED, Satchel Charge/Suicide Device; 1 each IED, Suicide Vest; 2 each Soviet TMD-B box mines; 4 each Soviet PMN anti-personnel (APERS) Mines; 10 each Improvised Blasting Caps; 5 each rolls of Packing tape; 10 each fertilizer bags indigenous to SE Asia; 5 each empty 20 liter palm oil jugs; 5 each empty random cooking oil containers of various sizes; 1 each basic tool kit which includes hammer, saw, screwdrivers, glue gun; 2 each Spider Mod devices; 3 each containers of inert Potassium Chlorate.

1.18 Replica M4 A2, Solid Dummy Training Rifle. Each item must feature a full metal barrel and flash hider. Item must be made of extremely durable solid urethane plastic and must not break or crack.

Mfr: Inert Products Model: Inert, Replica M4 A2, Solid Dummy Training Rifle (OTA-RWS01)

1.19 Replica M4, Solid Dummy Training Rifle. Each item must include an actual six position collapsing stock, full length metal barrel and metal RIS rails. The main body must be produced of extremely durable solid urethane material.

Mfr: Inert Products Model: Inert Replica M4 AWST, Solid Dummy Training Rifle (OTA-

AWST)

1.20 Replica M16 A2, Solid Dummy Training Rifle. Each item must feature a full metal barrel and flash hider.

Mfr: Inert Products Model: Inert Replica M16 A2, Solid Dummy Training Rifle (OTA-RWS11)

1.21 Replica AK-47, Solid Dummy Training Rifle. Each item must be constructed of extremely durable urethane, feature a steel barrel that extends through the receiver to prevent bending or breaking.

Mfr: Inert Products Model: Inert Replica AK-47, Solid Dummy Training Rifle (OTA-RWS19)

1.22 Replica Landmine Training Kit w/Case. Each kit must include: 1 each TC-6 Anti-Tank Mine; 1 each VS-2.2 Anti-Tank Mine; 1 each VS-1.6 Anti-Tank Mine; 1 each VS-50 AP Mine; 1 each TS-50 AP Mine; 1each YM-1 AP Mine; 1 each VS-MK2 AP Mine; and 1 each POMZ Stake Mine. Kit must include a heavy-duty storage/transport case capable of storing all kit contents.

Mfr: Inert Products Model: Inert Replica Landmine Training Kit w/Case (OTA-KIT45)

1.23 Functional Anti-Personnel (AP) Landmine Training Kit with Penalty Box. Each kit must include inert AP landmines that all feature functional, realistic pressure switches. Each training aid must be capable of integrating into a Penalty Box. The Penalty Box must include a siren and LED lights to indicate arming/trigger status. Kit must include: 1 each PMA-2; 1 each VS-50; 1 each P2-MK2; 1 each PMN-2; 1 each Penalty Box; 1 each 50' Extension Wire and 9V battery leads. Each training aid must be made of heavy duty solid cast resin. Kit must include a heavy-duty storage/transport case capable of storing all kit contents.

Mfr: Inert Products Model: Functional A.P. Landmine Training Kit with Penalty Box (OTA-

FIED107)

1.24 Platoon Level Functional IED Training Kit. Each modular kit must be designed to support Platoon level IED training, when training lanes and ranges are occupied or unavailable.

The kit must include a modular penalty box unit capable of monitoring all switches contained in the kit as well as other Normally Open, Normally Closed switches created by the end user and include a siren. The Penalty Box must include the following features: Automatic 30 second safe separation (arming delay); ability to automatically detect whether a switch is normally open or normally closed; include a penalty siren and LED lights that activate for 30 seconds when penalty box is initiated; and an Automatic Circuit Reset. The Kit must include: 1 each low metal content pressure plate; 1 each mousetrap tripwire; 1 each remote key fob; 1 each anti-movement switch; 1 each Trembler (vibratory) Switch; 1 each Digital Timer Switch; 1 each photocell switch; 1 each passive infrared (PIR) Motion Sensor; 1 each Commercial Pressure Mat; 1 each Replica 122mm Russian Artillery Projectile; 1 each Replica 82mm Chinese Mortar Round; 1 each Simulated Grapeshot IED; 1 each Simulated 5 lb bulk HE Charge, wrapped in PE Bag. Kit must include a heavy-duty storage/transport case capable of storing all kit contents.

Mfr: Inert Products Model: Platoon Level Functional IED Training Kit (OTA-PLK1)

1.25 Grenade Training Kit w/Case. Each kit must include (1) RG-42, (1) RGD-5, (1) F-1 Frag Grenade, (1) M-67 Frag Grenade, (1) Mk2 Frag Grenade, (1) RKG-3 (Anti-Armor Grenade), (1) M34 White Phosphorus Grenade, (1) M18 Smoke Grenade, (1) M25A2 CS Gas Grenade, (1) ABC-M7A2 CS Gas Grenade, (1) AN-M14 Incendiary Grenade. Kit must include a heavy-duty storage/transport case capable of storing all kit contents.

Mfr: Inert Products Model: Inert Grenade Training Kit w/Case (OTA-KIT66)

1.26 Mounted Convoy Operations System kits. Each kit must contain: 2 each small simulation tubes; 2 each large simulation tubes, heads and radio controller detonators. Each detonator must operate at 315 MHz. Each kit must come with at least: 50 each disposable Co2 cartridges; 6 each bottles of simulation powder; 6 each bottles white simulation powder; 250 plastic burst discs; 10 each airline connectors; 5 each airline junctions; and 10 each airline connector dust boots.

Mfr: MIL-SIM-FX, Model: MIL-MCO-IMEESS

1.27 Fill Station to support the entire MILSIMFX training aid inventory. The fill station must contain: 1 each Fill Station; 1 each vent hose; 1 each vent hose muffler; 2 each digital weigh scales capable of providing readings in ounces, lbs, or kilos at a minimum of 10 lbs; 2 each adapter hose assembly; 2 each adapter with pin depress; 1 each fill station service kit; 1 each package of 10 pin o-rings and a plastic carrying case; 1 each tube of silicon lube; 1 each 1 5/16” Allen wrench; 1 each adjustable wrench; and 10 each rupture discs and a plastic carrying case.

Mfr: MIL-SIM-FX, Model: MIL-FIL-SYS

1.28 MCO IMEESS Support/Site Startup Kits. Each kit must support the Mounted Convoy Operations kit. Each kit must include: 936 each bottles of white simulation powder; 936 each bottles of grey simulation powder; 1000 each low pressure burst discs; 800 each 12 gram Co2 cartridges; 1 each Co2 fill station with 2 weigh digital weigh scales capable of providing readings in ounces, lbs, or kilos at a minimum of 10 lbs; tools, and spare parts; 300 feet of airline; and an assorted supply of airline connectors and repair kits.

Mfr: MIL-SIM-FX, Model: MIL-MCO-SCS

1.29 Landmine Extended Deployment Tripwire Detonation Kit. The kit must use 12 gram Co2 cartridges and simulation powder. The kit must include: 6 drain holes to prevent water build-up for extended deployment and a 2 lb pull for initiation.

Mfr: MIL-SIM-FX, Model: MIL-LM

1.30 Powder Dispensing Suicide Vest. Each item must contain a four tube suicide vest simulator that includes the X-Vest and four pouches. The tubes must have blow forward (right angle) heads to direct powder away from user. The vest must use disposable 12 gram CO2 cartridges, rubber burst discs and FX Powder (Cool Smoke). The vest must include 1 each Trigger Command Detonator.

Mfr: MIL-SIM-FX, Model: MIL-SV4R

1.31 Dead Man Switch IED Simulator. Each simulator must have the capability to be fired using pressure release or pressure activation. Each dead man switch simulator must use disposable 12 gram CO2 cartridges and rubber burst discs and FX Powder (Cool Smoke).

1.32 Plastic Burst Disc – Case of 2500. Each burst disc must be made of molded plastic and be compatible with MIL-SIM-FX products.

1.33 Rubber Burst Disc – Bag of 500. Each burst disc must be made of rubber and be compatible with MIL-SIM-FX products.

1.34 Thermoplastic Burst Disc – Bag of 250. Each burst disc must be made of thermoplastic, function fragment free, create a louder report than the rubber burst disc. Each thermoplastic burst disc must be compatible with MIL-SIM-FX products.

1.35 Disposable 12 Gram CO2 Cartridge – Case of 300. Each disposable CO2 cartridge must be authorized for use with MIL-SIM-FX products.

1.36 Special FX Powder – White – Case of 12. The white powder must be used to simulate a visual cloud effect. Powder must be made of non-toxic environmentally friendly ground Talc powder and contain no explosive hazards.

1.37 Special FX Powder – Grey – Case of 12. The grey powder must be used to simulate a visual cloud effect. Powder must be made of non-toxic environmentally friendly ground Talc powder and contain no explosive hazards.

1.38 Green Airline – 100 ft. Replacement green airline must be compatible and authorized for use with MIL-SIM-FX products. The green airline must be made with par flex 1/8 O.D. x .031 wall nylon 500 WP line.

1.39 Trigger Command Detonator. Trigger command detonator must be compatible for use with MIL-SIM-FX products. The item must utilize 12 gram disposable CO2 cartridges.

1.40 Burst Disc Retaining Ring. Burst disc retaining ring must be compatible with MIL-SIM-FX products. The item must retain the burst disc used in various MIL-SIM-FX devices.

1.41 Airline Connectors – Package of 10. 1/8 x 10/32 Connectors must be compatible with MIL-SIM-FX products using a push lock connection. Airline connectors must be made of plated brass with a nylon part.

1.42 Dust Boots – Package of 10. Dust boots must be compatible with MIL-SIM-FX airline.

Dust boots must keep dirt and debris from entering the airline.

1.43 Airline Clippers. Airline clippers must be capable of cutting MIL-SIM-FX airline. Clippers must be made with plastic with a stainless steel cutting blade.

1.44 Suicide Vest Ripcord. The ripcord must be compatible with MIL-SIM-FX suicide vest training devices. The ripcord must be comprised of a cotter pin, cord and pull ring.

1.45 Hair Trigger Pin. The pin must be compatible with MIL-SIM-FX tripwire devices.

1.46 Trigger Command Detonator Seals – Package of 10. The seals must be compatible for use as a replacement seal in the Trigger Command Detonator and the Quick Fill Trigger.

1.47 DMS Pierce Pin Seals – Package of 10. The seals must be compatible for use as a replacement seal for any MIL-SIM-FX pressure release type pierce pin assembly.

1.48 ECHO System w/built in ILLUM-FX. System must be compatible with MIL-SIM-FX products for night training. System must include ECHO devices, a compressed air chamber with four solenoids and a 5-pin connector, and a caddy.

1.49 Long Range Transmitter and Receiver. System must be compatible with MIL-SIM-FX products. System must be comprised of 4 channel, 27 MHz with a ½ mile line of sight and include an external trigger option.

1.50 Long Range Transmitter/Receiver System. System must be compatible with MIL-SIM-FX products. System must include an external trigger option, transmitter, receiver, compressed air chamber, wiring harness, quick fill device and a carrying case.

1.51 Sure Seal Connector Wiring Harness w/5-Pin Connector. The harness must be compatible with MIL-SIM-FX products. The harness must connect the long range receiver to the ECHO system.

1.52 Compressed Air Chamber w/Four Solenoids. System must be compatible with MIL-SIM- FX products.

1.53 Compressed Air Chamber w/Two Solenoids. System must be compatible with MIL-SIM- FX products. System must include banana plug wire leads.

1.54 E3 Electronic Firing Device. Device must be compatible with MIL-SIM-FX products.

Device must include a transmitter / receiver, universal push / pull booby trap, buriable power house, inline head, detonator cap and caddy.

1.55 E3 Transmitter/Receiver. Device must be compatible with MIL-SIM-FX products. System must be comprised of 2 channel, 315 MHz with a 250 foot line of sight and include an external trigger option.

1.56 Universal Push/Pull Booby Trap - E3 Powering Device. Device must be compatible with MIL-SIM-FX products. Device must capable of being electronically, striker or hair pin initiated.

Device must use E3 head attachments.

1.57 Buriable Power House - E3 Powering Device. Device must be compatible with MIL-SIM- FX products. Device must be electronically initiated. Device must use E3 head attachments.

1.58 E3 Head Attachment - Detonator Cap. Device must be compatible with MIL-SIM-FX products. Device must transfer initiating pressure from E3 powering device to detonate MIL-SIM- FX devices.

1.59 E3 Head Attachment - Inline Head. Device must be compatible with MIL-SIM-FX products. Device must direct the effect in a straight line. Device must use E3 powering device.

1.60 E3 Head Attachment - Right Angle Head. Device must be compatible with MIL-SIM-FX products. Device must direct the effect at a 90 degree angle. Device must use E3 powering device.

1.61 Magnetic Squib. Device must be compatible with MIL-SIM-FX products. Device must incorporate a magnetic bottom. Device must require an external detonation device.

1.62 Hacksaw Blade Trigger. Device must be compatible with MIL-SIM-FX products. Device must be capable of being used with any receiver equipped with an external trigger option.

1.63 External Trigger Switch. Device must be compatible with MIL-SIM-FX products. Device must be capable of being used with any receiver equipped with an external trigger option.

1.64 Tilt Switch. Device must be compatible with MIL-SIM-FX products. Device must be capable of being used with any receiver equipped with an external trigger option.

1.65 Convoy Strip. Device must be compatible with MIL-SIM-FX products. Device must be made of rugged weather resistant materials and be capable of being used with any receiver equipped with an external trigger option. Device must initiate when 80 lbs are applied to the strip.

1.66 Convoy Strip - Timer Box. Device must be compatible with MIL-SIM-FX products.

Device must work in conjunction with the Convoy strip to regulate the time.

1.67 Pressure Mat. Device must be compatible with MIL-SIM-FX products. Device must be capable of being used with any receiver equipped with an external trigger option. The pressure mat must safely bend, or curve to a 45 degree angle, without initiating and be loosely rolled up for transport and temporary storage.

1.68 Sphere Bottles - Case of 200. Bottles must be compatible with MIL-SIM-FX products.

Bottles must sphere shaped with dimples weighing 23 grams.

1.69 Quick Fill Trigger. The device must be compatible with MIL-SIM-FX products. Device must be capable of filling any compressed air chamber. The device must use 12 gram disposable CO2 cartridges.

1.70 E3 Cable. The cable must be compatible with MIL-SIM-FX E3 receiver device. The E3 cable must be 14 inches in length.

1.71 Fill Station Rebuild Kit. The kit must be compatible with MIL-SIM-FX products. The kit must be used in conjunction with the fill station.

1.72 High Pressure Bottle - 6 Ounce. The 6 ounce bottle must be compatible with MIL-SIM-FX products. The bottle must be capable of being refilled with high pressure and incorporate a high flow valve. The high flow valve must release entire contents of bottle instantly.

1.73 High Pressure Bottle - 35 Cubic Inch. The 35 cubic inch bottle must be compatible with MIL-SIM-FX products. The bottle must be capable of being refilled with high pressure and incorporate a high flow valve. The high flow valve must release entire contents of bottle instantly.

1.74 Improvised Mortar System - Drop Fired. The system must be compatible with MIL-SIM- FX products. The system must include a launch tube, base assembly, drop fired rounds and a carrying case.

1.75 Grenade Accessory. Accessory must be made of machined aluminum and used to simulate Spider Grenades. Accessory must include bare wire leads for integration into spider grenade simulator launchers. System must be electrically initiated and utilize compressed air to active device effects.

Mfr: MIL-SIM-FX. Model: MIL-NPGS

1.76 Grenade Accessory with Magnetic Base. Accessory must be made of machined aluminum and used to simulate smoke grenades. Accessory must have a magnetic base in order to quickly mount to metallic surfaces. System must be electrically initiated and utilize compressed air to activate device effects.

Mfr: MIL-SIM-FX. Model: MIL-EFX-B1

1.77 Disposable .75 gram Mini CO2 Cartridge. Each disposable .75 gram Mini CO2 cartridge must be authorized for use with MIL-SIM-FX products.

Mfr: MIL-SIM-FX. Model: MIL-.75-C02

1.78 Black Thermoplastic Burst Disc – Single. The thermoplastic burst disc must be compatible with MIL-SIM-FX products MIL-EFX-B1 and MIL-NPGS. The burst disc must produce zero fragmentation.

Mfr: MIL-SIM-FX. Model: MIL-TPD-1

1.79 Opaque Burst Disc – Single. The thermoplastic burst disc must be compatible with MIL- SIM-FX products MIL-EFX-B1 and MIL-NPGS. The burst disc must produce zero fragmentation.

Mfr: MIL-SIM-FX. Model: MIL-OBD-1

1.80 Vehicle Initiated IED Simulator (VIEEDS) For Use With Mine-Resistant Ambush Protected (MRAP) Vehicles. The items must be surrogate (non-functioning) RHINOs ensuring there are no electrical connections to the vehicle. Surrogate RHINOS must look identical to actual RHINOs and lack all internal components. Installation accessories may vary depending on vehicle type and installation by the vendor is required at final destination.

Mfr: Threat Group, Model: VIEDIS M001 for MRAP

1.81 Vehicle IED Initiators for Use with High-Mobility Multi-Wheeled Vehicles (HMMWV).

The items must be surrogate (non-functioning) RHINOs ensuring there are no electrical connections to the vehicle. Surrogate RHINOS must look identical to actual RHINOs and lack all internal components.

Mfr: Threat Group. Model: VIEDIS H001 for HMMWV

1.82 Remote Controlled Vehicle Immobilization Devices. The device must contain a power supply, audio amplifier, speakers and incorporate the following: engine shut off/kill module, an audio module allowing the use of MP3 tracks provided by the instructors and the ability to produce a non-toxic fog inside the vehicle providing a more realistic training environment.

Mfr: Threat Group, Model: Convoy Immobilization Training Module (CITM)

1.83 Advanced remote initiation management systems for use with the existing/in use remote controlled vehicle immobilization devices. The advanced system must include a combination of a remote initiation management system and 3 each existing/in use vehicle immobilization devices.

Mfr: Threat Group, Model: ARIMS

1.84 Remote initiation management system which utilizes an initiation box containing a minimum of 3 separate initiation points to function training devices. The device must be capable of firing the following but not limited to existing/in use vehicle immobilization devices, propane/oxygen blast simulators and machine gun simulators utilizing a remote control up to 300 meters away.

Mfr: Threat Group, Model: RIMS

1.85 Propane and oxygen fired military machine gun simulator kits. Each simulator kit must be self-contained and contain all parts for the operation of the simulator, i.e. gun simulator, hoses, propane and oxygen regulators and tanks. The machine gun simulators must be capable using the remote initiation management systems.

Mfr: Threat Group, Model: XM-2A Machine Gun simulator unit w/remote firing unit

1.86 CITM Wiring Harness for HMMWV. Must be compatible with all CITM devices currently fielded by Threat Management Group. This will allow the transfer of CITMs to different HMMWV’s that go in for maintenance or other issues.

Mfr: Threat Group, Model: CITM wiring Harness

1.87 IED Monitor Kit. This kit must include: 1 each Receiver Box; 1 each long range Point Box;

and 3 each inert caps. This kit must be capable for use in any electrical circuit common to IED triggers.

Mfr: Threat Group, Model: R Link Kit

1.88 IED Monitor Inert Caps. The transmitter is externally identical to an electrically initiated blasting cap. This small transmitter can be utilized in any electrical circuit common to IED triggers.

Mfr: Threat Group, Model: R Link Cap

1.89 Handheld control system which handles multiple explosive blast simulators. The device must be capable of simultaneously controlling up to ten explosive simulators from a single transmitter. The transmitter must continuously monitor the armed, disarmed and firing status of each simulator within its range. The transmitter must be compatible with the following blast simulator systems; X-02, X-03, X-04, X-OMG, X-OHW and X-OMW.

Mfr: Threat Group, Model: X-LRT

1.90 Receiver for X-O Series Blast Simulator. The receiver must be compatible for use with the X-LRT controller. The receiver must be capable of communicating with the X-LRT to identify blast simulator status in real time.

Mfr: Threat Group, Model: X-RB

1.91 CITM Siren Accessory. Each siren accessory must be compatible with the CITM and RIMS products. Each accessory must utilize a high intensity siren that adds confusion and the "ringing ear" effect to inhibit communications in an enclosed area such as a vehicle. Each siren must plug directly into the CITM accessory port or the RIMS Firing Point and each accessory must be a high-quality, extremely durable product.

1.92 CITM LED Strobe Light Accessory. Each strobe light accessory must be compatible with the CITM and RIMS products. Each accessory must utilize state of the art high intensity LEDs. The strobe light must reflect light off the smoke dispensed by the CITM to induce additional confusion and stress during a simulated IED vehicle strike. The strobe light must plug directly into the CITM accessory port or the RIMS Firing Point, and the enclosure must be weather resistant.

1.93 SEDR (Strategic Extended Deployment Repeater). Each system must be compatible with the CITM and RIMS products. The system must incorporate high capacity batteries to allow operators to charge up to (3) CITMs simultaneously from "LOW" power to 100% without the need for local power. The system must be capable of deployment to remote locations on sites with large mission areas and act as a signal repeater. The system must incorporate a large battery capacity allowing the repeater to be deployed for 30 days without needing to be charged. The system must be able to retransmit signals from all components of an ARIMS package from any ARIMS set. The system must at least double the range of the ARIMS transmission capability.

1.94 XM-2A Fire Randomizer Accessory. Each accessory must be compatible with the XM-2A, CITM and RIMS products. The randomizer must receive the fire signal from the RIMS/ARIMS and then must send a random burst or fire signal to the XM-2A for a set amount of time. Operators must be capable of selecting different burst intensities (short/intermittent bursts or Heavy/Nearly continuous Bursts) and different activation lengths (5 seconds to 60 seconds). The randomizer must incorporate the option for a delay between randomizer activation and XM-2A initiation.

1.95 ARIMS Repeater. This repeater must be a small version of the large extended operation repeater. Each repeater must be compatible with the CITM and RIMS and ARIMS products. The repeater must not have the charging or extended deployment capabilities of the larger system. The repeater must be much smaller in size making it easier to deploy and conceal. The repeater must maintain the signal repeating capabilities of the extended deployment repeater and must cover a large operation area. The repeater must be quickly and easily taken down and recovered at the end of the training scenario. The repeater must be capable of repeating the signals of any component of the RIMS/ARIMS/CITM system and any RIMS/ARIMS/CITM.

1.96 A/RMM (Area/Room Monitoring Module). When the system is initiated, it must be capable of producing a loud explosion sound effect and emit a large volume of safe smoke. A single system must monitor multiple triggers. Operators must be able to use triggers available commercially off the shelf or triggers operators build onsite. The system must be compatible with the siren and LED strobe accessories as well as the RIMS/ARIMS systems.

1.97 Portable HME Lab Kit. Each kit must be completely inert and non-hazardous and include each of the following: 2 each pairs of Chemical Resistant Gloves (13 mil and Size 8); 1 each knee boots (size 12); 1 each premium cast iron corn grinder for wheat and grains; 1 each small personal fridge; 1 each inert hydrochloric acid 55 gallon chemical drum (sealed and empty); 1 each lab ware equipment package (basic); 1 each half mask respiratory body (size large); 2 each goggles (economy direct vent); 5 each two gallon jugs; 2 each 4-liter amber glass bottles; 3 each 1-liter sterile water; 2 each artificial ice cubes (12 piece, 1”, clear); 1 each pressure cooker; 1 each copper tubing ¼ inch; 1 each electric countertop range; 2 each aluminum powder (500g); 2 each hydrogen peroxide 16 oz bottles; 1 each citric acid (5 lb); 1 each confectioners sugar (1 lb); 1 each cookie sheet 17” x 11”; 1 each cookie sheet 15” x 10”; 1 each cookie sheet 13” x 9”; 1 each package of coffee filters; 1 each mason jar (case of 9 ); 5 each inert urea nitrate bags; 2 each acetone (1 quart);

1 each camp stove fuel tablets (hexamine); 5 boxes of 100 count (minimum) matches; 4 each middle eastern jugs; and 3 each heavy-duty storage/transport cases capable of storing all kit contents. Kit requires installation by the vendor at final destination.

1.98 CITM Key Accessory. The Key accessory must provide users the capability to turn the CITM on/off without using the ARC Remote Control. Accessory must be small enough to easily fit into a pocket or stored on a key chain. The Key must emit the proper influences necessary to turn the CITM on/off without the need for batteries. This accessory must allow users with only a single remote control, the capability of allowing multiple operators to turn on/off the CITM while foregoing the need to purchase additional ARC Systems.

1.99 Command IED Training Kit. The kit must include: 1 each RTF2 IED switch; 2 each Motorcycle Alarm IED switches with key FOBs; 2 each Command Wire IED switches with rocker switches; and 2 each Command Pull IED switches. Training aids must be electrically functional and explosively inert. Circuits must be R-Link compatible in order to integrate into existing training systems.

Mfr: Threat Management Group. Model: 2D028

1.100 Timed IED Training Kit. The kit must include: 2 each Analog/Mechanical Clock IED Switches; and 2 each Digital/Electronic timer IED Switches. Training aids must be electrically functional and explosively inert. Circuits must be R-Link compatible in order to integrate into existing training systems.

Mfr: Threat Management Group. Model: 2D029

1.101 Victim Operated IED Training Kit. The kit must include: 2 each Tripwire IED Switches;

2 each Push/Pull IED Switches; and 2 each dual hacksaw blade IED Switches. Training aids must be electrically functional and explosively inert. Circuits must be R-Link compatible in order to integrate into existing training systems.

Mfr: Threat Management Group. Model: 2D030

1.102 Set of size large men’s Middle Eastern apparel. Each set must include: a Disha Dasha, pajama pants, prayer hats, and head scarves.

Mfr: Combat Training Solutions (CTS) Model: U01MAAP; or equal

1.103 Set of size large women’s middle eastern apparel. Each set must include an Abaya, Burqa and Hijab or similar.

Mfr: CTS, Model: U01FAAP; or equal

Note: All set designs (1.104 – 1.115 require installation/assembly at final destination by contractor)

1.104 Bike Shop Set Design. The set design must include: 1 each bike rack; 1 each work bench;

assorted bikes and parts.

Mfr: Strategic Operations, Model: Bike Shop; or equal

1.105 Clothing Vendor Shop Set Design. The set design must include: 2 each clothing bins with a minimum of 20 items per bin wired securely to the bin and a minimum of 8 hanging items. All clothing items must be consistent with Middle Eastern clothing.

Mfr: Strategic Operations, Model: Clothing Vendors; or equal

1.106 Electronics Store Set Design. The set design must include: 2 each display tables: 35 each assorted electronic devices such as VCR’s, TVs and or radios. These items need not be functional, rather it must appear to look like an actual store front set up for use by the local populace.

Mfr: Strategic Operations, Model: Electronic Store; or equal

1.107 Automotive Parts and Tire Shop Set Design. The set design must include: 2 each gas pump replicas with gas hoses; 1 each work bench; and 10 assorted tires.

Mfr: Strategic Operations, Model: Garage/Auto Parts/Tire Shop; or equal

1.108 Restaurant Set Design. The set design must include: 4 each four person tables; 12 each chairs; 4 each tea sets; 1 each side table; and assorted restaurant items i.e. utensils, plates and salt and pepper shakers. All table items must be secured to the table to prevent unauthorized removal.

Mfr: Strategic Operations, Model: Restaurant; or equal

1.109 Rug Shop Set Design. The set design must include: 5 each 4’ X 6’ large rugs; 5 each 2’ X 8’ medium rugs; and 5 each 2’ X 3’ small rugs. The rugs must be of Middle Eastern design.

Mfr: Strategic Operations, Model: Rug Shop; or equal

1.110 Bakery Set Design. The set design must include: 2 each wooden stands with an assortment of faux (plastic or similar) bread products.

Mfr: Strategic Operations, Model: Bakery; or equal

1.111 Butcher Shop Set Design. The set design must include the following number and type of faux meat products: 6 each steaks; 1 each cow head; 1 each goat head; 2 each beef legs; 2 each pieces of beef; 1 each meat rack; and 1 each butcher block.

Mfr: Strategic Operations, Model: Butcher Shop; or equal

1.112 Fruit Stand Set Design. The set design must include: 3 each fruit carts with 3 bays and an assortment of faux fruit that cannot be removed from the bays.

Mfr: Strategic Operations, Model: Fruit Stand; or equal

1.113 Grain/Spice Store Set Design. The set design must include: 16 each large bags of various types of grains and spices.

Mfr: Strategic Operations, Model: Grain/Spice Stand; or equal

1.114 Kabob Vendor Set Design. The set design must include: 1 each grill; 20 each skewers with faux meat; 1 each side tray; 1 each side table; and a minimum of 4 sets of eating utensils.

Mfr: Strategic Operations, Model: Kabob Vendor; or equal

1.115 Vegetable Stand Set Design. The set design must include: 3 each carts with 3 bays and an appropriate assortment of faux vegetables that cannot be removed from the bays.

Mfr: Strategic Operations, Model: Veggie; or equal

2.0 Delivery locations. Items are to be delivered to the following locations as identified in each delivery order:

2.1. Andersen AFB, Guam

2.2 Sembach AB, Germany

2.3 Lackland AFB, TX

2.4 Moody AFB, GA

2.5 Camp Bullis, TX

2.6 Camp Guernsey, WY

2.7 Fort Dix, NJ

2.8 Tyndall AFB, FL

2.9 Ft Bliss, TX

2.10 As C-IED training needs evolve, delivery locations for training aids and equipment might be added, or removed, on an as needed basis. As new location requirements are determined, the SON will be updated accordingly and the shipping information will be identified within individual delivery orders.

3.0 Delivery/Installation/Schedule. Delivery of all items contemplated in this requirement shall be completed within the terms stated in the individual delivery orders. The Government will reimburse the contractor for travel and shipping in support of the C-IED Mission.

3.1 The travel for installation shall be IAW Joint Travel Regulation (JTR) and receipts shall be submitted with the invoice to support any claimed travel expense.

3.2 The shipping costs will be reimbursed on a cost basis against the shipping CLIN. Shipping receipts shall be submitted with the invoice to support any claimed shipping expenses.

3.3 No overhead or profit will be paid on the cost reimbursable expenses (shipping CLINs).

3.4 Contractor shall coordinate the delivery and receipt of all training aids and equipment with provided sites as identified in each individual delivery order.