Bid_Schedule.doc

FA2550-15-T-2013

Section SF 1449 - CONTINUATION SHEET

Keysight Technologies N9010A-503 Spectru

FFP

1.

Keysight Technologies N9010A-503 Spectrum Analyzer, or equal a.

Quantity: Four (4) b.

RF Input:

i.

Frequency Range: 10 MHz to 3 GHz ii.

Input Attenuator: 0 dB to 60 dB range, 10-dB steps iii.

Interface: 50-ohm Coax Connector (SMA or N-Type) c.

Measurement Bandwidths:

i.

Resolution Bandwidth: 1 Hz to 3 MHz (with at least 1/3/10 steps) ii.

Video Bandwidth: 1 Hz to 3 MHz (with at least 1/3/10 steps) d.

Measurement Functions:

i.

Analysis Bandwidth Up to 10 MHz ii.

Integrated Channel Power Measurements iii.

Occupied Bandwidth e.

Display Functions:

i.

Log magnitude scale in at least 1/2/5/10 dB/division steps ii.

Multiple independent traces (write, max hold, min hold, view, blank) iii.

Multiple independent markers (absolute, relative, trace selective) f.

Hard Drive Storage:

i.

Removable Solid-State Hard Drive (80 GB) ii.

Option N9010A-SSD on Keysight N9010A-503 g.

Data Interface:

i.

Ethernet Interface (1000 Base-T), RJ-45 Connector ii.

SNMP Control Supported h.

Electrical & Mechanical:

i.

4U Rack-Mount (max) ii.

Rack-Mount Kit Included (Option N9010A-1CP on Keysight N9010A-503) iii.

120-V AC Prime Power

FOB: Destination

PURCHASE REQUEST NUMBER: F3RTCL5148A002

NET AMT

Keysight Technologies N9064A-1TP, or equ

2.

Keysight Technologies N9064A-1TP, or equal a.

Quantity: One (1) b.

Vector Signal Analysis Measurement License:

i.

Supported by Rack-Mount Spectrum Analyzer listed in Item #2 ii.

FFT-based spectrum analysis and time-domain analysis iii.

Spectrum analysis: center frequency, span, occupied BW, band power, markers iv.

Time-domain analysis: amplitude, markers, CCDF, Error Vector Magnitude v.

Digital modulation analysis for BPSK, QPSK, 16QAM vi.

Perpetual license, single license transportable between spectrum analyzers

NET AMT

Keysight Technologies N5172B-503 Signal

3.

Keysight Technologies N5172B-503 Signal Generator, or equal a.

Quantity: Two (2) b.

RF Output:

i.

Frequency Range: 9 kHz to 3 GHz (min), 1-Hz resolution (max) ii.

Output Power: -100 dBm to +13 dBm (min), 0.1-dB resolution (max) c.

Interface: 50-ohm Coax Connector (SMA or N-Type) d.

Sweep Function:

i.

Stepped or list sweep function ii.

Dwell times: 0.1 ms to 100 s e.

Analog Modulation Options (Option N5172B-UNT on Keysight N5172B):

i.

Amplitude Modulation (AM) – up to 1 MHz modulation BW ii.

Frequency Modulation (FM) – up to 1 MHz modulation BW iii.

Phase Modulation (PM) – up to 1 MHz modulation BW iv.

Multiple simultaneous modulation options possible f.

Internal Multi-Function Modulation Options (Option N5172B-303 on Keysight N5172B):

i.

Waveforms: sine, square, ramp, triangle, pulse, noise ii.

Modulation rates: 1 Hz to 1 MHz g.

Pulse Modulation Option (Option N5172B-UNW on Keysight N5172B):

i.

Pulse width down to 2 ?s ii.

Pulse period down to 20 ?s (Repetition rate up to 500 kHz) h.

Multi-Tone Function Option (Option N5172B-430 on Keysight N5172B):

i.

Number of tones: Up to 64 ii.

120 MHz total bandwidth (all carriers with +/-60 MHz) iii.

Carriers / tones can be independently turned on or off i.

Custom Digital Modulation Option (Option N5172B-431 on Keysight N5172B):

i.

Modulation Schemes: BPSK, QPSK, OQPSK, 8-PSK, 16-PSK, 16-QAM ii.

Modulation Rate: 1 ksps to 75 Msps iii.

Internal Random Data Source: PN9, PN11, PN15, PN20, PN23 iv.

Multi-Carrier up to 100 carriers j.

Arbitrary Waveform Generator (Option N5172B-653 on Keysight N5172B):

i.

Modulation Bandwidth: Up to 60 MHz ii.

Sample Rate: Up to 75 MSa/s iii.

Playback Memory: 32 MSamples (min) k.

Real-Time Baseband Generator (Option N5172B-660 on Keysight N5172B):

i.

Real-Time I/Q Baseband Generation ii.

Support DVB-S/S2 Video Signals l.

Upgrade Baseband Memory (Option N5172B-022 on Keysight N5172B):

i.

Playback Memory: 512 MSamples m.

DVB-S/S2 Option (Option N7623B-GFP on Keysight N5172B):

i.

Create fully-coded DVB-S (Viterbi+R/S) and DVB-S2 (LDPC+BCH) signals ii.

Data: Random data, Color Bars, MPEG-2 TS file n.

Perpetual Fixed License Electrical & Mechanical:

i.

2U Rack-Mount (max) ii.

Rack-Mount Kit Included (Option 1CP004A for Keysight N5172B) iii.

120-V AC Prime Power

NET AMT

Keysight Technologies N9917A Handheld Fi

4.

Keysight Technologies N9917A Handheld FieldFox Microwave Analyzer, or equal a.

Quantity: One (1) b.

RF Input:

i.

Frequency Range: 10 MHz to 18 GHz ii.

Interface: 50-ohm Coax Connector (SMA or N-Type) c.

Display Functions:

i.

Log magnitude scale in at least 1/2/5/10 dB/division steps ii.

Multiple independent traces (write, max hold, min hold, view, blank) iii.

Multiple independent markers (absolute, relative, trace selective) d.

Spectrum Analyzer (Option N9917A-233 for Keysight N9917A):

i.

Support Spectrum Analyzer Measurements up to 18 GHz ii.

Resolution Bandwidth: 1 Hz to 3 MHz (with at least 1/3/10 steps) iii.

Video Bandwidth: 1 Hz to 3 MHz (with at least 1/3/10 steps) iv.

Internal Input Attenuator: 0 to 30 dB, 5-dB or 10-dB steps v.

Multiple independent traces (write, max hold, min hold, view, blank) vi.

Multiple independent markers (absolute, relative, trace selective) e.

Tracking Generator (Option N9917A-210 for Keysight N9917A):

i.

Tracking Generator up to 18 GHz ii.

Output Power adjustable up to -10 dBm, 1-dB steps iii.

Functions: CW, CW Tracking f.

Two-Port S-Parameter Measurement (Option N9917A-211 for Keysight N9917A):

i.

Calibrated Two-Port S-Parameter Measurements up to 18 GHz ii.

Time-domain gating supported g.

Built-In Power Meter (Option N9917A-310 for Keysight N9917A):

i.

Built-In Power Meter for aggregate power measurements up to 18 GHz ii.

Channel Power Measurements supported up to 18 GHz (user-defined BW) h.

Pre-Amplifier (Option N9917A-235 for Keysight N9917A):

i.

Pre-Amplifier across entire measurement range, up to 18 GHz i.

External Power Sensor Support (Option N9917A-302 for Keysight N9917A):

i.

Support for an external USB average power sensor up to at least 18 GHz, such as Keysight U2000A or equivalent j.

Electrical & Mechanical:

i.

Handheld Unit (less than ten pounds) ii.

120-V AC Power or Internal Battery

NET AMT

Keysight Technologies N9344C Handheld Sp

5.

Keysight Technologies N9344C Handheld Spectrum Analyzer, or equal a.

Quantity: One (1) b.

RF Input:

i.

Frequency Range: 10 MHz to 20 GHz ii.

Input Attenuator: 0 dB to 50 dB range, 5-dB or 10-dB steps iii.

Interface: 50-ohm Coax Connector (SMA or N-Type) c.

Measurement Bandwidths:

i.

Resolution Bandwidth: 10 Hz to 3 MHz (with at least 1/3/10 steps) ii.

Video Bandwidth: 10 Hz to 3 MHz (with at least 1/3/10 steps) d.

Display Functions:

i.

Log magnitude scale in at least 1/2/5/10 dB/division steps ii.

Multiple independent traces (write, max hold, min hold, view, blank) iii.

Multiple independent markers (absolute, relative) e.

Pre-Amplifier (Option N9344C-P20 for Keysight N9344C):

i.

Pre-Amplifier across entire measurement range, up to 20 GHz f.

External Power Sensor Support (Option N9344C-PWM for Keysight N9344C):

i.

Support for an external USB average power sensor up to at least 20 GHz, such as Keysight U2000A or equivalent g.

Security Features (Option N9344C-SEC for Keysight N9344C):

i.

Erase user data memory partition ii.

Disable/enable LAN & USB ports with password h.

Electrical & Mechanical:

i.

Handheld Unit (less than ten pounds) ii.

Hard-Sided Carrying Case (Option N9344C-1TC for Keysight N9344C) iii.

120-V AC Power or Internal Battery

NET AMT

Keysight Technologies U2000A USB Average

6.

Keysight Technologies U2000A USB Average Power Sensor, or equal a.

Quantity: Two (2) b.

RF Input:

i.

Frequency Range: 10 MHz to 18 GHz ii.

Power Range: -60 dBm to +20 dBm iii.

Interface: 50-ohm Coax Connector (SMA or N-Type) c.

Measurements:

i.

Average Power Measurements d.

Interface:

i.

USB Instrument Interface, Compatible with both Handheld Microwave Analyzer and Handheld Spectrum Analyzer instruments listed above in (3) and (4) ii.

Include 3m/10’ USB power sensor cable (Keysight U2031B or equivalent), compatible with power sensor

NET AMT

7.

Keysight Technologies 85518A N-Type C

FFP

7.

Keysight Technologies 85518A N-Type Calibration Kit, 0-18 GHz, or equal a.

Quantity: One (1) b.

RF Input:

i.

Frequency Range: 0 MHz to 18 GHz ii.

Interface: 50-ohm Coax Connector (N-Type) c.

Calibration Standards:

i.

Short ii.

Open iii.

Load (50-ohm) iv.

Through d.

Calibration Data:

i.

Specifications for each calibration standard for entry into Keysight Technologies N9917A Microwave Analyzer

NET AMT