Data_Requirements.pdf

For the best experience, open this PDF portfolio in

Acrobat X or Adobe Reader X, or later.

Get Adobe Reader Now!

http://www.adobe.com/go/reader

DD FORM 1423-2, AUG 96

CONTRACT DATA REQUIREMENTS LIST

(2 Data Items)

PREVIOUS EDITION MAY BE USED.

Form Approved OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 220 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

TDP ________ TM _______ OTHER _________________________

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

1. DATA ITEM NO. 2. TITLE OF DATA ITEM 3. SUBTITLE

4. AUTHORITY (Data Acquisition Document No.) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE

7. DD 250 REQ

8. APP CODE

9. DIST STATEMENT

REQUIRED

10. FREQUENCY

11. AS OF DATE 13. DATE OF SUBSEQUENT

SUBMISSION

12. DATE OF FIRST SUBMISSION 14. DISTRIBUTION

a. ADDRESSEE

b. COPIES

Draft Final

Reg Repro

15. TOTAL

16. REMARKS

17. PRICE GROUP

18. ESTIMATED

TOTAL PRICE

11. AS OF DATE

12. DATE OF FIRST SUBMISSION

13. DATE OF SUBSEQUENT

14. DISTRIBUTION

G. PREPARED BY H. DATE I. APPROVED BY J. DATE

Page ____ of ____ Pages

A_CONTRACT_LINE_ITEM_NO:

B_EXHIBIT: B(FY20)

TDP: Off

TIM: Yes

OTHER:

D_SYSTEMITEM: High Value Resistance Standard

E_CONTRACTPR_NO:

FCONTRACTOR:

1_DATA_ITEM_NO1: B001

2_TITLE_OF_DATA_ITEM1: Commercial-Off-The-Shelf (COTS) Manual

3_SUBTITLE1:

4_AUTHORITY1: DI-TMSS-80527C

5_CONTRACT_REFERENCE1: PD 19E-144A-DC Atch

6_REQUIRING_OFFICE1: AFLCMC/WNMEE

7_DD_250_REQ1: N/A

8_APP_CODE1: N/A

9_dist1: D

10_FREQUENCY1: ASREQ

11_AS_OF_DATE1: ASREQ

12_DATE_OF_FIRST_SUB1: See BLK 16

13_DATE_OF_SUBSEQUENT_SUB1: See BLK 16 addr1_1:

draft1_1:

reg1_1:

repro1_1:

1_DATA_ITEM_NO2: B002

2_TITLE_OF_DATA_ITEM2: Calibration Certificate

3_SUBTITLE2:

4_AUTHORITY2: DI-QCIC-80798C

5_CONTRACT_REFERENCE2: PD 19E-144A-DC Atch

6_REQUIRING_OFFICE2: AFLCMC/WNMEE

7_DD_250_REQ2: N/A

8_APP_CODE2: N/A

9_dist2: D

10_FREQUENCY2: ASREQ

11_AS_OF_DATE2: ASREQ

12_DATE_OF_FIRST_SUB2: See BLK 16

13_DATE_OF_SUBSEQUENT_SUB2: See BLK 16 addr2_1:

draft2_1:

reg2_1:

repro2_1:

addr1_2: Ship with unit draft1_2:

reg1_2: 22 repro1_2:

addr1_3:

draft1_3:

reg1_3:

repro1_3:

addr1_4:

draft1_4:

reg1_4:

repro1_4:

addr1_5:

draft1_5:

reg1_5:

repro1_5:

addr1_6:

draft1_6:

reg1_6:

repro1_6:

addr1_7:

draft1_7:

reg1_7:

repro1_7:

addr1_8:

draft1_8:

reg1_8:

repro1_8:

addr1_9:

draft1_9:

reg1_9:

repro1_9:

addr1_10:

draft1_10:

reg1_10:

repro1_10:

addr1_11:

draft1_11:

reg1_11:

repro1_11:

addr1_12:

draft1_12:

reg1_12:

repro1_12:

addr1_13:

draft1_13:

reg1_13:

repro1_13:

addr1_14:

draft1_14:

reg1_14:

repro1_14:

15_total_Draft1: 0

15_TOTALReg1: 22

15_TOTALRepro1: 0

16_REMARKS1: Blk 13: Concurrent with delivery of production units contractor shall furnish and pack 1 set of the manuals with each unit. Manual shall be on CD/DVD in indexed Portable Document Format (iPDF). Ship with unit.

The listed number of copies is the maximum amount for the acquisition. Specific quantities will be identified by issuance of a modification to exercise option quantities.

17_PRICE_GROUP1:

18_totalprice1:

addr2_2: Ship with unit addr2_3:

addr2_4:

16_REMARKS2: BLK 12: Concurrent with delivery of first production unit, the contractor shall furnish and pack one (1) calibration certificate with each unit. Ship with unit.

The listed number of copies is the maximum amount for the acquisition. Specific quantities will be identified by issuance of a modification to exercise option quantities.

17_PRICE_GROUP2:

18_totalprice2:

addr2_5:

addr2_6:

addr2_7:

addr2_8:

addr2_9:

addr2_10:

addr2_11:

addr2_12:

addr2_13:

addr2_14:

draft2_2:

reg2_2: 22 repro2_2:

draft2_3:

reg2_3:

repro2_3:

draft2_4:

reg2_4:

repro2_4:

draft2_5:

reg2_5:

repro2_5:

draft2_6:

reg2_6:

repro2_6:

draft2_7:

reg2_7:

repro2_7:

draft2_8:

reg2_8:

repro2_8:

draft2_9:

reg2_9:

repro2_9:

draft2_10:

reg2_10:

repro2_10:

draft2_11:

reg2_11:

repro2_11:

draft2_12:

reg2_12:

repro2_12:

draft2_13:

reg2_13:

repro2_13:

draft2_14:

reg2_14:

repro2_14:

15_total_Draft2: 0

15_TOTALReg2: 22

15_TOTALRepro2: 0

G_PREPARED_BY:

H_DATE: 12/12/18

1_APPROVED_BY:

J_DATE: 12/13/2018

Page:

of_pages:

Reset:

2018-12-12T09:53:09-0500

CAPUANO.FRANK.R.1403209658

2018-12-13T11:50:53-0500

BOHUS.JAMES.J.1267714289

DD FORM 1423-2, AUG 96

(2 Data Items)

The public reporting burden for this collection of information is estimated to average 220 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the

TDP ________ TM _______ OTHER _________________________

11. AS OF DATE 13. DATE OF SUBSEQUENT

12. DATE OF FIRST SUBMISSION 14. DISTRIBUTION

Page ____ of ____ Pages

A_CONTRACT_LINE_ITEM_NO:

B_EXHIBIT: C(FY21)

TDP: Off

TIM: Yes

OTHER:

D_SYSTEMITEM: High Value Resistance Standard

E_CONTRACTPR_NO:

FCONTRACTOR:

1_DATA_ITEM_NO1: C001

2_TITLE_OF_DATA_ITEM1: Commercial-Off-The-Shelf (COTS) Manual

3_SUBTITLE1:

4_AUTHORITY1: DI-TMSS-80527C

5_CONTRACT_REFERENCE1: PD 19E-144A-DC Atch

6_REQUIRING_OFFICE1: AFLCMC/WNMEE

7_DD_250_REQ1: N/A

8_APP_CODE1: N/A

9_dist1: D

10_FREQUENCY1: ASREQ

11_AS_OF_DATE1: ASREQ

12_DATE_OF_FIRST_SUB1: See BLK 16

13_DATE_OF_SUBSEQUENT_SUB1: See BLK 16 addr1_1:

draft1_1:

reg1_1:

repro1_1:

1_DATA_ITEM_NO2: C002

2_TITLE_OF_DATA_ITEM2: Calibration Certificate

3_SUBTITLE2:

4_AUTHORITY2: DI-QCIC-80798C

5_CONTRACT_REFERENCE2: PD 19E-144A-DC Atch

6_REQUIRING_OFFICE2: AFLCMC/WNMEE

7_DD_250_REQ2: N/A

8_APP_CODE2: N/A

9_dist2: D

10_FREQUENCY2: ASREQ

11_AS_OF_DATE2: ASREQ

12_DATE_OF_FIRST_SUB2: See BLK 16

13_DATE_OF_SUBSEQUENT_SUB2: See BLK 16 addr2_1:

draft2_1:

reg2_1:

repro2_1:

addr1_2: Ship with unit draft1_2:

reg1_2: 23 repro1_2:

addr1_3:

draft1_3:

reg1_3:

repro1_3:

addr1_4:

draft1_4:

reg1_4:

repro1_4:

addr1_5:

draft1_5:

reg1_5:

repro1_5:

addr1_6:

draft1_6:

reg1_6:

repro1_6:

addr1_7:

draft1_7:

reg1_7:

repro1_7:

addr1_8:

draft1_8:

reg1_8:

repro1_8:

addr1_9:

draft1_9:

reg1_9:

repro1_9:

addr1_10:

draft1_10:

reg1_10:

repro1_10:

addr1_11:

draft1_11:

reg1_11:

repro1_11:

addr1_12:

draft1_12:

reg1_12:

repro1_12:

addr1_13:

draft1_13:

reg1_13:

repro1_13:

addr1_14:

draft1_14:

reg1_14:

repro1_14:

15_total_Draft1: 0

15_TOTALReg1: 23

15_TOTALRepro1: 0

16_REMARKS1: Blk 13: Concurrent with delivery of production units contractor shall furnish and pack 1 set of the manuals with each unit. Manual shall be on CD/DVD in indexed Portable Document Format (iPDF). Ship with unit.

The listed number of copies is the maximum amount for the acquisition. Specific quantities will be identified by issuance of a modification to exercise option quantities.

17_PRICE_GROUP1:

18_totalprice1:

addr2_2: Ship with unit addr2_3:

addr2_4:

16_REMARKS2: BLK 12: Concurrent with delivery of first production unit, the contractor shall furnish and pack one (1) calibration certificate with each unit. Ship with unit.

The listed number of copies is the maximum amount for the acquisition. Specific quantities will be identified by issuance of a modification to exercise option quantities.

17_PRICE_GROUP2:

18_totalprice2:

addr2_5:

addr2_6:

addr2_7:

addr2_8:

addr2_9:

addr2_10:

addr2_11:

addr2_12:

addr2_13:

addr2_14:

draft2_2:

reg2_2: 23 repro2_2:

draft2_3:

reg2_3:

repro2_3:

draft2_4:

reg2_4:

repro2_4:

draft2_5:

reg2_5:

repro2_5:

draft2_6:

reg2_6:

repro2_6:

draft2_7:

reg2_7:

repro2_7:

draft2_8:

reg2_8:

repro2_8:

draft2_9:

reg2_9:

repro2_9:

draft2_10:

reg2_10:

repro2_10:

draft2_11:

reg2_11:

repro2_11:

draft2_12:

reg2_12:

repro2_12:

draft2_13:

reg2_13:

repro2_13:

draft2_14:

reg2_14:

repro2_14:

15_total_Draft2: 0

15_TOTALReg2: 23

15_TOTALRepro2: 0

G_PREPARED_BY:

H_DATE: 12/12/18

1_APPROVED_BY:

J_DATE: 12/13/2018

Page:

of_pages:

Reset:

2018-12-12T09:53:09-0500

CAPUANO.FRANK.R.1403209658

2018-12-13T11:51:14-0500

BOHUS.JAMES.J.1267714289

DATA ITEM DESCRIPTION

Title: COMMERCIAL OFF-THE-SHELF (COTS) MANUALS AND ASSOCIATED

SUPPLEMENTAL DATA

Number: DI-TMSS-80527C Approval Date: 20110812 AMSC Number: 9207 Limitation: No DTIC Applicable: No GIDEP Applicable: No Office of Primary Responsibility: TM

Applicable Forms: None

Use/relationship: Commercial Off-the-Shelf Manuals may be used as is or with supplementation to support COTS equipment used by DOD. This DID is used to:

a. Acquire sample COTS manuals for evaluation.

b. Acquire COTS manuals which have been evaluated and found to be acceptable.

c. Acquire associated supplemental data, if required.

This DID contains format, content, and intended use information for the data deliverable(s) resulting from the work described in MIL-PRF-32216.

This DID supersedes DI-TMSS-80527B, dated 17 Oct 2006.

Requirements:

1. Content. The manual shall contain all technical information on the assembly, installation, operation, parts, and maintenance of commercial equipment.

2. Evaluation. The manual shall be evaluated using the criteria found in MIL-PRF-32216.

3. Supplementation. The manual may be supplemented with additional data to comply with contract. Supplemental data shall be prepared in accordance with MIL-PRF-32216.

4. Format. The basic manual shall be in the contractor's format. Supplemental data shall be in the format specified by the contracting activity.

5. Digital files. Interactive Electronic Technical Manuals (IETMs) or PDFs are preferred for electronic COTS manuals.

6. PDF Files. PDF files shall be searchable, capable of having links added, and have fonts embedded.

7. IETMs. IETMs shall meet the general style and format and user interface requirements in MIL-PRF-87268 or MIL-STD-40051-1 (Army only) or MIL-STD-3031 (Army only).

8. Paper manuals. If paper manuals are acquired, the data shall be clearly legible and on paper of sufficient quality for long term use.

DATA ITEM DESCRIPTION

Title: CALIBRATION CERTIFICATE/REPORT

Number: DI-QCIC-80798C Approved Date: 20170123 AMSC Number: F9766 Limitation: N/A DTIC Applicable: No GIDEP Applicable: No Preparing Activity: 36 Project Number: QCIC-2017-003

Applicable Forms: N/A

Use/Relationship: The Calibration Certificate/Report documents calibration certificates or reports accompanying the calibrations performed on Department of Defense (DoD) test, measurement, and diagnostic equipment.

a. This Data Item Description (DID) contains the format and content preparation instructions for the data product generated by the specific and discrete task requirement as delineated in the contract.

b. This DID is applicable to contracts requiring calibration of test equipment prior to delivery. This DID is consistent with ISO/IEC 17025, General requirements for the competence of testing and calibration laboratories, requirements for calibration reports or certificates.

(Copies of this document are available online at http://www.iso.org.)

c. This DID supersedes DI-QCIC-80798B.

Requirements:

1. Reference documents. The applicable issue of the documents cited herein, including their approval dates and dates of any applicable amendments, notices, and revisions, shall be as specified in the contract.

2. Format. Contractor format is acceptable.

3. Content. The calibration certificate or report shall include:

a. Title (e.g., calibration certificate or calibration report);

b. The name and address of the laboratory and the location where the calibrations were carried out, if different from the address of the laboratory;

c. Unique identification of the calibration certificate or test report (such as the serial number), and on each page an identification in order to ensure that the page is recognized as a part of the test report or calibration certificate, and a clear identification of the end of the calibration certificate or test report;

d. The name and address of the client or customer;

e. Identification of the method used;

http://www.iso.org/

f. A description of, the condition of, and the unambiguous identification of the item(s) tested or calibrated;

g. The date of receipt of the test or calibration item(s) where this is critical to the validity and application of the results, and the date(s) of performance of the test or calibration;

DISTRIBUTION STATEMENT A. Approved for public release. Distribution is unlimited.

h. Reference to the sampling plan and procedures used by the laboratory or other bodies where these are relevant to the validity or application of the results;

i. The test or calibration results with, where appropriate, the units of measurement;

j. The name(s), function(s) and signature(s) or equivalent identification of person(s) authorizing the calibration certificate or test report;

k. Where relevant, a statement to the effect that the results relate only to the items tested or calibrated;

l. The conditions (e.g., environmental) under which the calibrations were made that have an influence on the measurement results;

m. The uncertainty of measurement or a statement of compliance with an identified metrological specification or clauses thereof;

n. Evidence that the measurements are traceable.

End of DI-QCIC-80798C.

DD FORM 1423-1, FEB 2001

(1 Data Item)

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the

TDP ________ TM _______ OTHER

Page of Pages

1_DATA_ITEM_NO: A001

2_TITLE_OF_DATA_ITEM: Commercial-Off-The-Shelf (COTS) Manual

3_SUBTITLE:

4_AUTHORITY_Data_Acquisit: DI-TMSS-80527C

5_CONTRACT_REFERENCE: PD 19E-144A-DC Atch

6_REQUIRING_OFFICE: AFLCMC/WNMEE

7_DID_250_REQ: N/A

8_APP_CODE: N/A

DIST_STATEMENT: D

10_FREQUENCY: ASREQ

11_AS_OF_DATE: ASREQ

12_DATE_OF_FIRST_SUBMISSI: See BLK 16

13_DATE_OF_SUBSEQUENT_SUB: See BLK 16 addressee1:

draft1:

reg1:

repro1:

addressee2: 1. AFMETCAL draft2:

reg2:

repro2:

addressee3: Attn: Frank Capuano draft3:

reg3:

repro3:

addressee4: 813 Irving Wick Dr., W. Horton Building draft4:

reg4: 1 repro4:

addressee5: Heath, OH 43056 draft5:

reg5:

repro5:

addressee6:

draft6:

reg6:

repro6:

addressee7:

draft7:

reg7:

repro7:

addressee8:

draft8:

reg8:

repro8:

addressee9: Same as above draft9:

reg9: 1 repro9:

addressee10:

draft10:

reg10:

repro10:

addressee11:

draft11:

reg11:

repro11:

addressee12:

draft12:

reg12:

repro12:

addressee13: Ship with unit draft13:

reg13: 22 repro13:

addressee14:

draft14:

reg14:

repro14:

addressee15:

draft15:

reg15:

repro15:

addressee16:

draft16:

reg16:

repro16:

addressee17: Ship with unit draft17:

reg17: 2 repro17:

addressee18:

draft18:

reg18:

repro18:

addressee19:

draft19:

reg19:

repro19:

addressee20:

draft20:

reg20:

repro20:

addressee21:

draft21:

reg21:

repro21:

addressee22:

draft22:

reg22:

repro22:

addressee23:

draft23:

reg23:

repro23:

addressee24:

draft24:

reg24:

repro24:

addressee25:

draft25:

reg25:

repro25:

addressee26:

draft26:

reg26:

repro26:

addressee27:

draft27:

reg27:

repro27:

addressee28:

draft28:

reg28:

repro28:

addressee29:

draft29:

reg29:

repro29:

addressee30:

draft30:

reg30:

repro30:

addressee31:

draft31:

reg31:

repro31:

addressee32:

draft32:

reg32:

repro32:

addressee33:

draft33:

reg33:

repro33:

addressee34:

draft34:

reg34:

repro34:

addressee35:

draft35:

reg35:

repro35:

addressee36:

draft36:

reg36:

repro36:

addressee37:

draft37:

reg37:

repro37:

addressee38:

draft38:

reg38x:

repro38:

total_draft: 0 total_repro: 0

16_REMARKS: Blk 12: No later than 60 days after contract award , 1 copy(ies) of the final manual is(are) required on CD/DVD in indexed Portable Document Format (iPDF). Ship to addressee #1 listed in BLK 14a. Manual shall be in an editable format to allow for technical order number assignment. If manuals are available electronically, the file or web link may be sent to frank.capuano@us.af.mil. Reference contract number in all correspondence.

Blk 13: No later than 120 days after initial review, 1 copy of the final manual is required. Manual shall be on CD/DVD in Indexed Portable Document Format (iPDF). Ship to addressee #1 listed in BLK 14a.

Blk 13: Concurrent with delivery of production units contractor shall furnish and pack 1 set of the manuals with each unit. Manual shall be on CD/DVD in indexed Portable Document Format (iPDF). Ship with unit.

Blk 13: No later than 120 days after contract award, concurrent with delivery of first production units, the contractor shall furnish and pack 1 set of manuals with each of the first production units. Manuals shall be on CD/DVD in Indexed Portable Document Format (iPDF). Ship with unit.

17_PRICE_GROUP:

ESTIMATED_TOTAL_PRICE:

G_PREPARED_BY:

H_DATE: 12/12/18

1_APPROVED_BY:

J_DATE: 12/13/2018

Page:

reg38t: 26

A_CONTRACT_LINE_ITEM_NO:

B_EXHIBIT: A(FY 19)

TDP:

TM: x

OTHER:

DSYSTEMITEM: High Value Resistance Standard

E_CONTRACTPR_NO:

FCONTRACTOR:

of_pages:

Reset:

2018-12-12T09:19:25-0500

CAPUANO.FRANK.R.1403209658

2018-12-13T11:50:06-0500

BOHUS.JAMES.J.1267714289

DD FORM 1423-1, FEB 2001

(1 Data Item)

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the

TDP ________ TM _______ OTHER

Page of Pages

1_DATA_ITEM_NO: A002

2_TITLE_OF_DATA_ITEM: Calibration Certificate

3_SUBTITLE:

4_AUTHORITY_Data_Acquisit: DI-QCIC-80798C

5_CONTRACT_REFERENCE: PD 19E-144A-DC Atch

6_REQUIRING_OFFICE: AFLCMC/WNMEE

7_DID_250_REQ: N/A

8_APP_CODE: N/A

DIST_STATEMENT: D

10_FREQUENCY: ASREQ

11_AS_OF_DATE: ASREQ

12_DATE_OF_FIRST_SUBMISSI: See BLK 16

13_DATE_OF_SUBSEQUENT_SUB: See BLK 16 addressee1:

draft1:

reg1:

repro1:

addressee2: Ship with unit draft2: 24 reg2:

repro2:

addressee3:

draft3:

reg3:

repro3:

addressee4:

draft4:

reg4:

repro4:

addressee5:

draft5:

reg5:

repro5:

addressee6:

draft6:

reg6:

repro6:

addressee7:

draft7:

reg7:

repro7:

addressee8:

draft8:

reg8:

repro8:

addressee9:

draft9:

reg9:

repro9:

addressee10:

draft10:

reg10:

repro10:

addressee11:

draft11:

reg11:

repro11:

addressee12:

draft12:

reg12:

repro12:

addressee13:

draft13:

reg13:

repro13:

addressee14:

draft14:

reg14:

repro14:

addressee15:

draft15:

reg15:

repro15:

addressee16:

draft16:

reg16:

repro16:

addressee17:

draft17:

reg17:

repro17:

addressee18:

draft18:

reg18:

repro18:

addressee19:

draft19:

reg19:

repro19:

addressee20:

draft20:

reg20:

repro20:

addressee21:

draft21:

reg21:

repro21:

addressee22:

draft22:

reg22:

repro22:

addressee23:

draft23:

reg23:

repro23:

addressee24:

draft24:

reg24:

repro24:

addressee25:

draft25:

reg25:

repro25:

addressee26:

draft26:

reg26:

repro26:

addressee27:

draft27:

reg27:

repro27:

addressee28:

draft28:

reg28:

repro28:

addressee29:

draft29:

reg29:

repro29:

addressee30:

draft30:

reg30:

repro30:

addressee31:

draft31:

reg31:

repro31:

addressee32:

draft32:

reg32:

repro32:

addressee33:

draft33:

reg33:

repro33:

addressee34:

draft34:

reg34:

repro34:

addressee35:

draft35:

reg35:

repro35:

addressee36:

draft36:

reg36:

repro36:

addressee37:

draft37:

reg37:

repro37:

addressee38:

draft38:

reg38x:

repro38:

total_draft: 24 total_repro: 0

16_REMARKS: Blk 12: Concurrent with delivery of first production and production units contractor shall furnish and pack 1 calibration certificate with each unit. Ship with unit.

17_PRICE_GROUP:

ESTIMATED_TOTAL_PRICE:

G_PREPARED_BY:

H_DATE: 12/12/2018

1_APPROVED_BY:

J_DATE: 12/13/2018

Page:

reg38t: 0

A_CONTRACT_LINE_ITEM_NO:

B_EXHIBIT: A(FY 19)

TDP:

TM: x

OTHER:

DSYSTEMITEM: High Value Resistance Standard

E_CONTRACTPR_NO:

FCONTRACTOR:

of_pages:

Reset:

2018-12-12T09:17:34-0500

CAPUANO.FRANK.R.1403209658

2018-12-13T11:50:24-0500

BOHUS.JAMES.J.1267714289