Laser Wire Makering Questions and Answers Updated.doc

· What is required production rate? Please indicate production rate per min. or per hour.

· Approx. 26ft per minute

· Do you need to mark both, Upper and Lower case characters or only Upper case?

· Upper Case only (30 characters per mark/mark spacing 1-15”)

· Do you need to mark a barcode?

· No

· Do you have a requirement to mark special characters or symbols? If yes, then please list them.

· Yes - . + / - * ( ) < > 0-9 and blank space (30 characters per mark/ mark spacing 1-15”))

· What is Minimum and Maximum size of wire/cable do you need to process?

· 26 AWG - 6 AWG (0.75 mm to6.35 mm OD) single or multi core wire (6”-10,000”)

· Do you have any size restrictions on the required system?

· No

· Does the system need to be portable?

· No

· Do you have electrical power requirements, such as 110vac or 220 vac?

· Building has 110/220/460 VAC 60 HZ– however install location only has 110 VAC 60 HZ

· Do you have shop air?

· Building has shop air (90-100 PSI) – however it is not installed in or near the location for this unit. No plans currently to add shop air to this area as this building is schedule for demolition. Requesting no air powered wire marker.