Laser Wire Makering Questions and Answers.doc
DOC document 28 KB Posted
- Attached to
- Laser Wire Marking Device Federal contract opportunity
- Solicitation number
- F3ZT900120A001
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Laser Wire Makering Questions and Answers Updated.doc | DOC document |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Laser Wire Makering Questions and Answers
Q:
What is required production rate? Please indicate production rate per min. or per hour.
A:
Maximum speed: up to 8m / min (26 ft/min)
Q:
Do you need to mark both, Upper and Lower case characters or only Upper case?
A:
30 characters (max) per mark as standard Full alpha-numeric character set A-Z (uppercase) print sizes Small vertical: 1.00 x 0.75mm (0.039 x 0.030“)Med. horiz: 1.10 x 0.82mm (0.043 x 0.032”)Large horiz: 1.33 x 1.00mm (0.052 x 0.039“) Mark spacing from 25mm to 400mm (1 to 15“)
Q:
Do you need to mark a barcode?
A:
No
Q:
Do you have a requirement to mark special characters or symbols?
If yes, then please list them.
A:
0-9 plus extra characters ( / - * ( ) < >
Q:
What is Minimum and Maximum size of wire/cable do you need to process?
A:
Wire size range: 26 AWG - 6 AWG (0.75 mm to6.35 mm OD), single core wire or multi core cable
Q:
Do you have any size restrictions on the required system?
A:
No
Q:
Does the system need to be portable?
A:
No
Q:
Do you have electrical power requirements, such as 110vac or 220 vac?
A:
Site requirements are 110-120 V, 60 Hz (Single phase)
Q:
Do you have shop air?
A:
We do have compressed air of 90-100 PSI.
File details come from the government source that posted it. Updated .