Questions and Answers - 15 June 2020.docx

Questions & Answers 15 June 2020

1. How wide is the building? Bldg. 40ft wide

2. How far is it from the wall to the hopper? Electric side to the center conveyor is 16ft 4 inches, 1ft 10 inches is the wall from the bailer on the power side, output side from the bailer to the wall is 10ft

3. Can the conveyor be relocated to accommodate the new baler? Yes, is can be accommodated for the new bailer

4. Would they be open to changing the bale cross section of the unit? Yes, we will be willing to

5. Can we get a detailed drawing of the machine and conveyor? If not would there be a chance to visit the facility to pull measurements before shipping unit? No there are no detailed drawing of the machine in the building. Yes, before shipping unit will defiantly need to visit

6. Is there a facility layout drawing of the baler and conveyor? If not could rough dimensions be supplied of the overall length of the unit from rear of HPU to front of Bale table, distance from the rear of the hopper (side facing the HPU) to the wall of the facility? 320 7/8 inches overall size, 60 13/16 inches is the feed chute size from the center of the chute to the wall, Electric side to the center of chute is 16ft 4 inches

7. Is the power unit required to be on the rear of the Baler, could it be mounted on the floor? We can mount it on the floor

8. You list the contractor as the installer of the unit is this to be tied to this bid or will it be rolled to a separate bid? The installation costs need to be included in this bid. There will only be one contract for the complete effort.