Water Jet Cutter Specifications Data Sheet (UPDATED).docx

Waterjet Salient Characteristics

PER STATEMENT OF WORK PROVIDED AND FOLLOWING ADDITIONAL ORDERING INFORMATION: WATERJET CUTTING MACHINE

1. Maximum System foot print (all components) must be 12’ 11” x 7’ 10” maximum.

2. Minimum work envelope size must be 8’ 4” x 4’ 7”

3. Minimum 8” Z Travel

4. Minimum positional accuracy of ± 0.001" and location repeatability of ± 0.001'' over entire work envelope

5. Minimum table load capacity of 400 lb/in2

6. 40 horsepower pump motor able to drive a 0.014” orifice at 60,000 psi.

a. Pressure attenuators are not allowed to maintain operating pressure.

b. Pump operation must be 85% efficient converting electrical horsepower to nozzle horsepower.

7. Nozzle with integrated diamond orifice guaranteed for 500 hours.

8. Audible noise emitted by the equipment under load shall be ≤79 dBA at the operator’s workstation

9. Automatic taper compensation and automatic taper adjustment system that calculates the taper requirements continuously, not by average.

10. Integrated water level control system controlled by joystick at operator station

11. Programmable Variable Speed Solids Removal System with Reverse Flow

12. Collision sensing terrain follower

13. Closed Loop Water Recycling System with Startup Filter Spares Kit

14. 60,000 BTU Chiller

15. Laser edge finder

16. USB camera with microscope lens is provided to zoom in on features, locate, and select with software integrated into the cutting program.

17. 600 lb abrasive storage

18. Reverse Osmosis System with Water Softener

19. Separate Pump and Nozzle spares maintenance kits including compartmented boxes for storage

20. Computer Control System will be fully automatic, solid-state, integrated circuit, 64-bit, multiple microprocessor based-type personal computer integrated with CAD/CAM software and LCD flat panel display.

21. Software shall run on Windows® 10 and be specifically designed for all abrasive jet.

22. 10 standalone seats of software

23. 2 year warranty

24. 3 days onsite training for up to 5 operators

25. 1 day onsite maintenance within first year of machine installation.

26. Complete system (pump, table, software) tested together at factory in USA prior to shipment. Must cut a part at origin and pass accuracy test.