Exhibits.pdf
PDF 222 KB Posted
- Attached to
- Screws Federal contract opportunity
- Solicitation number
- SPMYM325Q5019
About this file
This is a Contract Data Requirements List (CDRL) document detailing data deliverable requirements for a Defense Logistics Agency contract for hex head capscrews and socket flat countersunk head self-locking cap screws. The CDRL specifies two key data items required for each exhibit (A through G): a Certificate of Compliance (DI-MISC-81356A) and a Chemical & Mechanical Certification Data/Report (DI-MISC-80678), both to be submitted one time with material delivery.
Each certification requires specific test results and documentation - the Certificate of Compliance requires technical content as described in contract line items, while the Chemical & Mechanical Certification must contain actual quantitative test results for all chemical and mechanical testing required by specifications. Special requirements for fastener certification include evidence of testing the correct number of specimens and using new untested fasteners for wedge tensile and yield strength testing. All data items must be submitted under separate shipment numbers per clauses 252.232-7006 & 252.232-7003. The requiring office is Code 245 and distribution is specified as one final copy to addressee 133.2.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPMYM325Q5019 SF18.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CONTRACT DATA REQUIREMENTS LIST
245.22-0493-25 (2 DATA ITEMS)
A. CONTRACT LINE ITEM NO. C. CATEGORY
TDP X TM OTHER
D. SYSTEM/ITEM F. CONTRACTOR
HEX HEAD CAPSCREW
B. EXHIBIT
A
E. CONTRACT/PR NO.
1. DATA ITEM NO. 2. TITLE of DATA ITEM 3. SUBTITLE
A001
CERTIFICATION OF QUALITY
CERTIFICATE OF COMPLIANCE COMPLIANCE
4. AUTHORITY(DATA Item Description Number) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-81356A SECTION C. 2 CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION
a. ADDRESSEE b. COPIES
REQUIRED
DD With Material DRAFT FINAL One Time
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT 133.2 0 1 0
N/A N/A
SUBMISSION
N/A
16 REMARKS 0 0 0
1. Technical content as described in the respective contract line item{s).
2. For Payment & Submission of Data refer to Clauses 252.232-7006 &
15. TOTAL 0 1 0
252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
1.DATA ITEM NO. 2 TITLE of DATA ITEM 3. SUBTITLE
A002
CHEMICAL & MECHANICAL CERTIFICATION
CERTIFICATION DATA / REPORT
4. AUTHORITY 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-80678 SECTION C. 3 CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION
a. ADDRESSEE b. COPIES
DD
REQUIRED One Time
With Material DRAFT FINAL
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT
N/A
SUBMISSION
133.2 0 1 0 N/A
N/A
16 REMARKS
1. Paragraphs 10.2.2, 10.2.3 & 10.4 of DI-MISC-80678 do not apply. 0 0 0
2. Technical content as described in the respective contract line item{s).
3. This certification shall contain the actual Test results of all Chemical 15. TOTAL 0 1 0
& Mechanical Test required by the Specification
4. The Test results shall be quantitative & in the units required by the specification.
5. For Payment & Submission of Data refer to Clauses 252.232-7006 &
252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
7. In addition to the Certification Data requirements specified in DI-MISC- 80678, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material" apply.
G. PREPARED BY H. DATE I. APPROVED BY 245.2 J. DATE
1/5/2025
STEVE YOUNG Ext: 3207 01/04/2025 X 01/05/2025
245.22 Jaso n Laflam m e
Sign ed by; LAFLAM M E .JASO N .R .1255776556
SPMYM325Q5019
0002/0003
A. CONTRACT LINE ITEM NO. C. CATEGORY
TDP X TM OTHER
D. SYSTEM/ITEM F. CONTRACTOR
HEX HEAD CAPSCREW
B. EXHIBIT
B
E. CONTRACT/PR NO.
1. DATA ITEM NO. 2. TITLE of DATA ITEM 3. SUBTITLE
B001
CERTIFICATION OF QUALITY
CERTIFICATE OF COMPLIANCE COMPLIANCE
4. AUTHORITY(DATA Item Description Number) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-81356A SECTION C. 2 CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION
a. ADDRESSEE b. COPIES
REQUIRED
DD With Material DRAFT FINAL One Time
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT 133.2 0 1 0
N/A N/A
SUBMISSION
N/A
16 REMARKS 0 0 0
1. Technical content as described in the respective contract line item{s).
2. For Payment & Submission of Data refer to Clauses 252.232-7006 &
15. TOTAL 0 1 0
252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
1.DATA ITEM NO. 2 TITLE of DATA ITEM 3. SUBTITLE
B002
CHEMICAL & MECHANICAL CERTIFICATION
CERTIFICATION DATA / REPORT
4. AUTHORITY 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-80678 SECTION C. 3 CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION
a. ADDRESSEE b. COPIES
DD
REQUIRED One Time
With Material DRAFT FINAL
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT
N/A
SUBMISSION
133.2 0 1 0 N/A
N/A
16 REMARKS
1. Paragraphs 10.2.2, 10.2.3 & 10.4 of DI-MISC-80678 do not apply. 0 0 0
2. Technical content as described in the respective contract line item{s).
3. This certification shall contain the actual Test results of all Chemical 15. TOTAL 0 1 0
& Mechanical Test required by the Specification
4. The Test results shall be quantitative & in the units required by the specification.
5. For Payment & Submission of Data refer to Clauses 252.232-7006 &
252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
7. In addition to the Certification Data requirements specified in DI-MISC- 80678, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material" apply.
G. PREPARED BY H. DATE I. APPROVED BY 245.2 J. DATE
1/5/2025
STEVE YOUNG Ext: 3207 01/04/2025 X 01/05/2025
245.22 Jaso n Laflam m e
Sign ed by; LAFLAM M E .JASO N .R .1255776556
0005/0006
A. CONTRACT LINE ITEM NO. C. CATEGORY
TDP X TM OTHER
D. SYSTEM/ITEM F. CONTRACTOR
HEX HEAD CAPSCREW
B. EXHIBIT
C
E. CONTRACT/PR
NO.
1. DATA ITEM NO. 2. TITLE of DATA ITEM 3. SUBTITLE
C001
CERTIFICATION OF QUALITY
CERTIFICATE OF COMPLIANCE COMPLIANCE
4. AUTHORITY(DATA Item Description Number) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-81356A SECTION C. 2 CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION
a. ADDRESSEE b. COPIES
REQUIRED
DD With Material DRAFT FINAL One Time
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT 133.2 0 1 0
N/A N/A
SUBMISSION
N/A
16 REMARKS 0 0 0
1. Technical content as described in the respective contract line item{s).
2. For Payment & Submission of Data refer to Clauses 252.232-7006 &
15. TOTAL 0 1 0
252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
1.DATA ITEM NO. 2 TITLE of DATA ITEM 3. SUBTITLE
C002
CHEMICAL & MECHANICAL CERTIFICATION
CERTIFICATION DATA / REPORT
4. AUTHORITY 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-80678 SECTION C. 3 CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION
a. ADDRESSEE b. COPIES
DD
REQUIRED One Time
With Material DRAFT FINAL
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT
N/A
SUBMISSION
133.2 0 1 0 N/A
N/A
16 REMARKS
1. Paragraphs 10.2.2, 10.2.3 & 10.4 of DI-MISC-80678 do not apply. 0 0 0
2. Technical content as described in the respective contract line item{s).
3. This certification shall contain the actual Test results of all Chemical 15. TOTAL 0 1 0
& Mechanical Test required by the Specification
4. The Test results shall be quantitative & in the units required by the specification.
5. For Payment & Submission of Data refer to Clauses 252.232-7006 &
252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
7. In addition to the Certification Data requirements specified in DI-MISC- 80678, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material" apply.
G. PREPARED BY H. DATE I. APPROVED BY 245.2 J. DATE
1/5/2025
STEVE YOUNG Ext: 3207 01/04/2025 X 01/05/2025
245.22 Jaso n Laflam m e
Sign ed by; LAFLAM M E .JASO N .R .1255776556
0008/0009
(2 DATA ITEMS)
C. CATEGORY
TDP X TM OTHER
F. CONTRACTOR
B. EXHIBIT
D
E. CONTRACT/PR NO.
SPMYM325Q5019
245.2C-0524-25
A. CONTRACT LINE ITEM NO. 0011/0012
D. SYSTEM/ITEM
SOCKET FLAT COUNTERSUNK HEAD
SLF LKG CAP SCREW ANGLE & SOCKET
HEAD CAP SCREW
1. DATA ITEM NO. 2. TITLE of DATA ITEM 3. SUBTITLE
D001
CERTIFICATION OF QUALITY
CERTIFICATE OF COMPLIANCE COMPLIANCE
4. AUTHORITY(DATA Item Description Number) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-81356A SECTION C. 2 CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION
a. ADDRESSEE b. COPIES
REQUIRED
DD With Material DRAFT FINAL One Time
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT 133.2 0 1 0
N/A N/A
SUBMISSION
N/A
16 REMARKS 0 0 0
1. Technical content as described in the respective contract line item(s).
15. TOTAL 0 1 0
2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-
7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
1.DATA ITEM NO. 2 TITLE of DATA ITEM 3. SUBTITLE
D002
CHEMICAL & MECHANICAL CERTIFICATION
CERTIFICATION DATA / REPORT
4. AUTHORITY 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-80678 SECTION C. 3 CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION
a. ADDRESSEE b. COPIES
DD
REQUIRED One Time
With Material DRAFT FINAL
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT
N/A
SUBMISSION
133.2 0 1 0 N/A
N/A
16 REMARKS
1. Paragraphs 10.2.2, 10.2.3 & 10.4 of DI-MISC-80678 do not apply. 0 0 0
2. Technical content as described in the respective contract line item(s).
3. This certification shall contain the actual Test results of all Chemical & 15. TOTAL 0 1 0 Mechanical Test required by the Specification
4. The Test results shall be quantitative & in the units required by the specification.
5. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232- 7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
7. In addition to the Certification Data requirements specified in DI-MISC-80678, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material" apply.
G. PREPARED BY H. DATE I. APPROVED BY 245.2 J. DATE
1 /14/20 2 5
CONRAD GAGNE Ext: 6797 01/08/2025 X 01/11/2025
245.2C Jason Laflam m e
Sign ed by: LAFLAM M E .JASO N .R .1255776556
C. CATEGORY
TDP X TM OTHER
B. EXHIBIT
E
E. CONTRACT/PR NO. F. CONTRACTOR
245.2C-0524-25
A. CONTRACT LINE ITEM
NO 0014/0015D.
SYSTEM/ITEM
1. DATA ITEM NO. 2. TITLE of DATA ITEM 3. SUBTITLE
E001
CERTIFICATION OF QUALITY
CERTIFICATE OF COMPLIANCE COMPLIANCE
4. AUTHORITY(DATA Item Description Number) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-81356A SECTION C. 2 CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION
a. ADDRESSEE b. COPIES
REQUIRED
DD With Material DRAFT FINAL One Time
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT 133.2 0 1 0
N/A N/A
SUBMISSION
N/A
16 REMARKS 0 0 0
1. Technical content as described in the respective contract line item(s).
15. TOTAL 0 1 0
2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-
7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
1.DATA ITEM NO. 2 TITLE of DATA ITEM 3. SUBTITLE
E002
CHEMICAL & MECHANICAL CERTIFICATION
CERTIFICATION DATA / REPORT
4. AUTHORITY 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-80678 SECTION C. 3 CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION
a. ADDRESSEE b. COPIES
DD
REQUIRED One Time
With Material DRAFT FINAL
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT
N/A
SUBMISSION
133.2 0 1 0 N/A
N/A
16 REMARKS
1. Paragraphs 10.2.2, 10.2.3 & 10.4 of DI-MISC-80678 do not apply. 0 0 0
2. Technical content as described in the respective contract line item(s).
3. This certification shall contain the actual Test results of all Chemical & 15. TOTAL 0 1 0 Mechanical Test required by the Specification
4. The Test results shall be quantitative & in the units required by the specification.
5. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232- 7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
7. In addition to the Certification Data requirements specified in DI-MISC-80678, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material" apply.
G. PREPARED BY H. DATE I. APPROVED BY 245.2 J. DATE
1 /14/20 2 5
CONRAD GAGNE Ext: 6797 01/08/2025 X 01/11/2025
245.2C
C. CATEGORY
TDP X TM OTHER
B. EXHIBIT
F
E. CONTRACT/PR NO. F. CONTRACTOR
SPMYM325Q5019
245.2C-0524-25
A. CONTRACT LINE ITEM NO. 0017/0018
D. SYSTEM/ITEM
SOCKET FLAT COUNTERSUNK HEAD
SLF LKG CAP SCREW ANGLE & SOCKET
HEAD CAP SCREW
1. DATA ITEM NO. 2. TITLE of DATA ITEM 3. SUBTITLE
F001
CERTIFICATION OF QUALITY
CERTIFICATE OF COMPLIANCE COMPLIANCE
4. AUTHORITY(DATA Item Description Number) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-81356A SECTION C. 2 CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION
a. ADDRESSEE b. COPIES
REQUIRED
DD With Material DRAFT FINAL One Time
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT 133.2 0 1 0
N/A N/A
SUBMISSION
N/A
16 REMARKS 0 0 0
1. Technical content as described in the respective contract line item(s).
15. TOTAL 0 1 0
2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-
7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
1.DATA ITEM NO. 2 TITLE of DATA ITEM 3. SUBTITLE
F002
CHEMICAL & MECHANICAL CERTIFICATION
CERTIFICATION DATA / REPORT
4. AUTHORITY 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-80678 SECTION C. 3 CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION
a. ADDRESSEE b. COPIES
DD
REQUIRED One Time
With Material DRAFT FINAL
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT
N/A
SUBMISSION
133.2 0 1 0 N/A
N/A
16 REMARKS
1. Paragraphs 10.2.2, 10.2.3 & 10.4 of DI-MISC-80678 do not apply. 0 0 0
2. Technical content as described in the respective contract line item(s).
3. This certification shall contain the actual Test results of all Chemical & 15. TOTAL 0 1 0 Mechanical Test required by the Specification
4. The Test results shall be quantitative & in the units required by the specification.
5. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232- 7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
7. In addition to the Certification Data requirements specified in DI-MISC-80678, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material" apply.
G. PREPARED BY H. DATE I. APPROVED BY 245.2 J. DATE
1 /14/20 2 5
CONRAD GAGNE Ext: 6797 01/08/2025 X 01/11/2025
245.2C
B. EXHIBIT C. CATEGORY
G TDP X TM OTHER
E. CONTRACT/PR NO. F. CONTRACTOR
SPMYM325Q5019
245.2C-0524-25
A. CONTRACT LINE ITEM NO. 0020/0021
D. SYSTEM/ITEM
SOCKET FLAT COUNTERSUNK HEAD
SLF LKG CAP SCREW ANGLE & SOCKET
HEAD CAP SCREW
1. DATA ITEM NO. 2. TITLE of DATA ITEM 3. SUBTITLE
G001
CERTIFICATION OF QUALITY
CERTIFICATE OF COMPLIANCE COMPLIANCE
4. AUTHORITY(DATA Item Description Number) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-81356A SECTION C. 2 CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION
a. ADDRESSEE b. COPIES
REQUIRED
DD With Material DRAFT FINAL One Time
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT 133.2 0 1 0
N/A N/A
SUBMISSION
N/A
16 REMARKS 0 0 0
1. Technical content as described in the respective contract line item(s).
15. TOTAL 0 1 0
2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-
7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
1.DATA ITEM NO. 2 TITLE of DATA ITEM 3. SUBTITLE
G002
CHEMICAL & MECHANICAL CERTIFICATION
CERTIFICATION DATA / REPORT
4. AUTHORITY 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-80678 SECTION C. 3 CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION
a. ADDRESSEE b. COPIES
DD
REQUIRED One Time
With Material DRAFT FINAL
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT
N/A
SUBMISSION
133.2 0 1 0 N/A
N/A
16 REMARKS
1. Paragraphs 10.2.2, 10.2.3 & 10.4 of DI-MISC-80678 do not apply. 0 0 0
2. Technical content as described in the respective contract line item(s).
3. This certification shall contain the actual Test results of all Chemical & 15. TOTAL 0 1 0 Mechanical Test required by the Specification
4. The Test results shall be quantitative & in the units required by the specification.
5. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232- 7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
7. In addition to the Certification Data requirements specified in DI-MISC-80678, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material" apply.
G. PREPARED BY H. DATE I. APPROVED BY 245.2 J. DATE
1 /14/20 2 5
CONRAD GAGNE Ext: 6797 01/08/2025 X 01/11/2025
245.2C
File details come from the government source that posted it. Updated .