Exhibits A-L.pdf
PDF 492 KB Posted
- Attached to
- CAP SCREWS Federal contract opportunity
- Solicitation number
- SPMYM323Q9020
About this file
This document contains multiple Contract Data Requirements Lists (CDRLs) for a federal solicitation seeking various types of socket head cap screws, flat countersunk head cap screws, and hex head cap screws. The Defense Logistics Agency Land and Maritime is the requiring agency, with responses due with material and certifications required one time under solicitation number SPMYM323Q9020. Data items include Certificates of Compliance and Chemical and Mechanical Certification reports conforming to specifications DI-MISC-81356A and DI-MISC-80678. Compliance documents must contain actual test results in required units and formats, and fastener certifications must show evidence of correct specimen testing.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Clauses and Provisions 23Q9020.pdf | ||
| Combined Synopsis Solicitation SPMYM323Q9020.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CONTRACT DATA REQUIREMENTS LIST
245.2C-0932-23 (2 DATA ITEMS)
A. CONTRACT LINE ITEM NO.
CLIN 0001
B. EXHIBIT
A
C. CATEGORY
TDP X TM OTHER
D. SYSTEM/ITEM.
SOCKET HEAD CAP SCREW S/L &
SOCKET HEAD CAP SCREW
E. CONTRACT/PR NO.
31724001/SPMYM323Q9020
F. CONTRACTOR
1. DATA ITEM NO.
A001
2. TITLE of DATA ITEM
CERTIFICATE OF COMPLIANCE
3. SUBTITLE
CERTIFICATION OF QUALITY
COMPLIANCE
4. AUTHORITY(DATA Item Description Number)
DI-MISC-81356A
5. CONTRACT REFERENCE
SECTION C. 2
6. REQUIRING OFFICE
CODE 245
7. DD 250 REQ
DD
9. DIST
STATEMENT
REQUIRED
A
10. FREQUENCY
One Time
12. DATE OF 1st
SUBMISSION
With Material
14. DISTRIBUTION
a. ADDRESSEE b. COPIES
DRAFT FINAL
8. APP. CODE
N/A
11. AS OF DATE
13. DATE OF
SUBSEQUENT
SUBMISSION
N/A
REG REPRO
133.2 0 1 0
16 REMARKS
1. Technical content as described in the respective contract line item(s).
2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
0 0 0
15. TOTAL 0 1 0
1.DATA ITEM NO.
A002
2 TITLE of DATA ITEM
CERTIFICATION DATA / REPORT
CHEMICAL & MECHANICAL CERTIFICATION
4. AUTHORITY
DI-MISC-80678
5. CONTRACT REFERENCE
SECTION C. 3
a. ADDRESSEE b. COPIES
SUBSEQUENT
SUBMISSION
REG REPRO
133.2
16 REMARKS
1. Paragraphs 10.2.2, 10.2.3 & 10.4 of DI-MISC-80678 do not apply.
2. Technical content as described in the respective contract line item(s).
3. This certification shall contain the actual Test results of all Chemical
& Mechanical Test required by the Specification
4. The Test results shall be quantitative & in the units required by the specification.
5. For Payment & Submission of Data refer to Clauses 252.232-7006 &
252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
7. In addition to the Certification Data requirements specified in DI-MISC- 80678, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industr
15. TOTAL
0 1 0
G. PREPARED BY
CONRAD GAGNE Ext: 3617 245.2C
H. DATE
06/21/2023
I. APPROVED BY 245.2
X
J. DATE
06/26/23
245.2C-0932-23 (2 DATA ITEMS)
A. CONTRACT LINE ITEM NO.
CLIN 0003
B. EXHIBIT
B
C. CATEGORY
TDP X TM OTHER
D. SYSTEM/ITEM.
SOCKET HEAD CAP SCREW S/L &
SOCKET HEAD CAP SCREW
E. CONTRACT/PR NO.
31724002/SPMYM323Q9020
F. CONTRACTOR
1. DATA ITEM NO.
B001
CERTIFICATION OF QUALITY
a. ADDRESSEE b. COPIES
SUBSEQUENT
SUBMISSION
N/A
REG REPRO
133.2 0 1 0
16 REMARKS
1. Technical content as described in the respective contract line item(s).
2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must
B002
CHEMICAL & MECHANICAL CERTIFICATION
4. AUTHORITY
DI-MISC-80678
5. CONTRACT REFERENCE
a. ADDRESSEE b. COPIES
SUBSEQUENT
SUBMISSION
1. Paragraphs 10.2.2, 10.2.3 & 10.4 of DI-MISC-80678 do not apply.
2. Technical content as described in the respective contract line item(s).
3. This certification shall contain the actual Test results of all Chemical
& Mechanical Test required by the Specification
4. The Test results shall be quantitative & in the units required by the specification.
5. For Payment & Submission of Data refer to Clauses 252.232-7006 &
252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
7. In addition to the Certification Data requirements specified in DI-MISC- 80678, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industr
06/21/2023
06/26/23
245.2C-0948-23
(2 DATA ITEMS)
A. CONTRACT LINE ITEM NO.
CLIN 0005
B. EXHIBIT
C
C. CATEGORY
TDP X TM
OTHER
D. SYSTEM/ITEM
SOCKET HEAD CAP SCREW
1. DATA ITEM NO.
E. CONTRACT/PR NO.
31784001/SPMYM323Q9020
F. CONTRACTOR
CERTIFICATION OF QUALITY
C001
a. ADDRESSEE b. COPIES
DRAFT
FINAL
SUBSEQUENT
SUBMISSION
N/A
1. Technical content as described in the respective contract line item(s).
2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must
1. DATA ITEM NO.
C002
4. AUTHORITY
CERTIFICATION DATA/ REPORT
CHEMICAL & MECHANICAL CERTIFICATION
DI-MISC-80678 SECTION C. 3
SUBSEQUENT
REG
REPRO
1. Paragraphs 10.2.2, 10.2.3 & 10.4 of DI-MISC-80678 do not apply.
2. Technical content as described in the respective contract line item(s).
3. This certification shall contain the actual Test results of all Chemical &
Mechanical Test required by the Specification
4. The Test results shall be quantitative & in the units required by the specification.
5. For Payment & Submission of Data refer to Clauses 252.232-7006 &
252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
7. In addition to the Certification Data requirements specified in DI-MISC- 80678, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material" apply.
H. DATE
06/27/2023
6/28/2023
06/28/23
Signed by: MEDEIROS.CAMDEN.J.1 539229S71
133.2 0 1 0
245.2C-0951-23
CLIN 0007
B. EXHIBIT
D
SOCKET FLAT COUNTERSUNK HEAD
CAP SCREW ANGLE
E. CONTRACT/PR NO.
31784011/SPMYM323Q9020
D001
CERTIFICATION OF QUALITY
SUBSEQUENT
SUBMISSION
1. Technical content as described in the respective contract line item(s).
2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232- 7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shi ent Number.
1.DATA ITEM NO. 2 TITLE ofDATA ITEM
D002
DI-MISC-80678
5. CONTRACT REFERENCE
SECTION C. 3
10. FREQUENCY 12. DATE OF 1st
SUBMISSION
133.2 0
1. Paragraphs 10.2.2, 10.2.3 & 10.4 of DI-MISC-80678 do not apply. 0 0 0
2. Technical content as described in the respective contract line item(s).
3. This certification shall contain the actual Test results of all Chemical &
Mechanical Test required by the Specification
15. TOTAL 0 0
4. The Test results shall be quantitative & in the units required by the specification.
5. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232- 7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
7. In addition to the Certification Data requirements specified in DI-MISC-80678, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material" apply.
06/28 /23
I. APPROVED BY
245.2
6/29/2023
06-29-23
Signed by: MEDEIROS.CAMDEN.J.1 539229571
15. TOTAL 0 0
CLIN 0009
B. EXHIBIT
E
SOCKET FLAT COUNTERSUNK HEAD
CAP SCREW ANGLE
E. CONTRACT/PR NO.
31784012/SPMYM323Q9020
E001
CERTIFICATION OF QUALITY
SUBSEQUENT
SUBMISSION
E002
5. CONTRACT REFERENCE
SECTION C. 3
10. FREQUENCY 12. DATE OF 1st
SUBMISSION
Mechanical Test required by the Specification
15. TOTAL 0 0
4. The Test results shall be quantitative & in the units required by the specification.
5. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232- 7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
7. In addition to the Certification Data requirements specified in DI-MISC-80678, CLIN 0011
B. EXHIBIT
F
SOCKET FLAT COUNTERSUNK HEAD
CAP SCREW ANGLE
E. CONTRACT/PR NO.
31784013/SPMYM323Q9020
F001
CERTIFICATION OF QUALITY
SUBSEQUENT
SUBMISSION
F002
5. CONTRACT REFERENCE
SECTION C. 3
10. FREQUENCY 12. DATE OF 1st
SUBMISSION
Mechanical Test required by the Specification
15. TOTAL 0 0
4. The Test results shall be quantitative & in the units required by the specification.
5. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232- 7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
7. In addition to the Certification Data requirements specified in DI-MISC-80678, CLIN 0013
B. EXHIBIT
G
SOCKET FLAT COUNTERSUNK HEAD
CAP SCREW ANGLE
E. CONTRACT/PR NO.
31784014/SPMYM323Q9020
G001
CERTIFICATION OF QUALITY
SUBSEQUENT
SUBMISSION
G002
5. CONTRACT REFERENCE
SECTION C. 3
10. FREQUENCY 12. DATE OF 1st
SUBMISSION
Mechanical Test required by the Specification
15. TOTAL 0 0
4. The Test results shall be quantitative & in the units required by the specification.
5. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232- 7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
7. In addition to the Certification Data requirements specified in DI-MISC-80678, 245.2C-0953-23 (2 DATA ITEMS)
A. CONTRACT LINE ITEM NO.
CLIN 0015
B. EXHIBIT
H
C. CATEGORY
TDP X TM OTHER
D. SYSTEM/ITEM.
SOCKET HEAD CAP SCREW S/L
E. CONTRACT/PR NO.
31784021/SPMYM323Q9020
F. CONTRACTOR
1. DATA ITEM NO.
H001
CERTIFICATION OF QUALITY
a. ADDRESSEE b. COPIES
SUBSEQUENT
SUBMISSION
N/A
REG REPRO
133.2 0 1 0
16 REMARKS
1. Technical content as described in the respective contract line item(s).
2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must
H002
CHEMICAL & MECHANICAL CERTIFICATION
4. AUTHORITY
DI-MISC-80678
5. CONTRACT REFERENCE
a. ADDRESSEE b. COPIES
SUBSEQUENT
SUBMISSION
1. Paragraphs 10.2.2, 10.2.3 & 10.4 of DI-MISC-80678 do not apply.
2. Technical content as described in the respective contract line item(s).
3. This certification shall contain the actual Test results of all Chemical
& Mechanical Test required by the Specification
4. The Test results shall be quantitative & in the units required by the specification.
5. For Payment & Submission of Data refer to Clauses 252.232-7006 &
252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
7. In addition to the Certification Data requirements specified in DI-MISC-
06/29/23
A. CONTRACT LINE ITEM NO.
CLIN 0017
B. EXHIBIT
I
C. CATEGORY
TDP X TM OTHER
D. SYSTEM/ITEM.
SOCKET HEAD CAP SCREW S/L
E. CONTRACT/PR NO.
31784022/SPMYM323Q9020
F. CONTRACTOR
1. DATA ITEM NO.
I001
CERTIFICATION OF QUALITY
a. ADDRESSEE b. COPIES
SUBSEQUENT
SUBMISSION
N/A
REG REPRO
133.2 0 1 0
16 REMARKS
1. Technical content as described in the respective contract line item(s).
2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must
I002
CHEMICAL & MECHANICAL CERTIFICATION
4. AUTHORITY
DI-MISC-80678
5. CONTRACT REFERENCE
a. ADDRESSEE b. COPIES
SUBSEQUENT
SUBMISSION
1. Paragraphs 10.2.2, 10.2.3 & 10.4 of DI-MISC-80678 do not apply.
2. Technical content as described in the respective contract line item(s).
3. This certification shall contain the actual Test results of all Chemical
& Mechanical Test required by the Specification
4. The Test results shall be quantitative & in the units required by the specification.
5. For Payment & Submission of Data refer to Clauses 252.232-7006 &
252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
7. In addition to the Certification Data requirements specified in DI-MISC-
A. CONTRACT LINE ITEM NO.
CLIN 0019
B. EXHIBIT
J
C. CATEGORY
TDP X TM OTHER
D. SYSTEM/ITEM.
SOCKET HEAD CAP SCREW S/L
E. CONTRACT/PR NO.
31784023/SPMYM323Q9020
F. CONTRACTOR
1. DATA ITEM NO.
J001
CERTIFICATION OF QUALITY
a. ADDRESSEE b. COPIES
SUBSEQUENT
SUBMISSION
N/A
REG REPRO
133.2 0 1 0
16 REMARKS
1. Technical content as described in the respective contract line item(s).
2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must
J002
CHEMICAL & MECHANICAL CERTIFICATION
4. AUTHORITY
DI-MISC-80678
5. CONTRACT REFERENCE
a. ADDRESSEE b. COPIES
SUBSEQUENT
SUBMISSION
1. Paragraphs 10.2.2, 10.2.3 & 10.4 of DI-MISC-80678 do not apply.
2. Technical content as described in the respective contract line item(s).
3. This certification shall contain the actual Test results of all Chemical
& Mechanical Test required by the Specification
4. The Test results shall be quantitative & in the units required by the specification.
5. For Payment & Submission of Data refer to Clauses 252.232-7006 &
252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
7. In addition to the Certification Data requirements specified in DI-MISC-
245.2Z-0962-23 (2 DATA ITEMS)
A. CONTRACT LINE ITEM NO.
CLIN 0021
B. EXHIBIT
K
C. CATEGORY
TDP X TM OTHER
D. SYSTEM/ITEM
SOCKET HEAD CAPSCREW
E. CONTRACT/PR NO.
31794001/SPMYM323Q9020
F. CONTRACTOR
1. DATA ITEM NO.
K001
CERTIFICATION OF QUALITY
a. ADDRESSEE b. COPIES
SUBSEQUENT
SUBMISSION
N/A
REG REPRO
133.2 0 1 0
16 REMARKS
1. Technical content as described in the respective contract line item(s).
2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must
K002
CHEMICAL & MECHANICAL CERTIFICATION
4. AUTHORITY
DI-MISC-80678
5. CONTRACT REFERENCE
a. ADDRESSEE b. COPIES
SUBSEQUENT
SUBMISSION
1. Paragraphs 10.2.2, 10.2.3 & 10.4 of DI-MISC-80678 do not apply.
2. Technical content as described in the respective contract line item(s).
3. This certification shall contain the actual Test results of all Chemical
& Mechanical Test required by the Specification
4. The Test results shall be quantitative & in the units required by the specification.
5. For Payment & Submission of Data refer to Clauses 252.232-7006 &
252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
7. In addition to the Certification Data requirements specified in DI-MISC- 80678, the requirements of the contract section titled, Marking and Certification requirements for Contro
STEVE YOUNG Ext: 3207 245.2Z
06/28/2023
06/28/23
245.2Z-0979-23 (2 DATA ITEMS)
A. CONTRACT LINE ITEM NO.
CLIN 0023
B. EXHIBIT
L
C. CATEGORY
TDP X TM OTHER
D. SYSTEM/ITEM
HEX HEAD CAPSCREW
E. CONTRACT/PR NO.
31864011/SPMYM323Q9020
F. CONTRACTOR
1. DATA ITEM NO.
L001
CERTIFICATION OF QUALITY
a. ADDRESSEE b. COPIES
SUBSEQUENT
SUBMISSION
N/A
REG REPRO
133.2 0 1 0
16 REMARKS
1. Technical content as described in the respective contract line item(s).
2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must
L002
CHEMICAL & MECHANICAL CERTIFICATION
4. AUTHORITY
DI-MISC-80678
5. CONTRACT REFERENCE
a. ADDRESSEE b. COPIES
SUBSEQUENT
SUBMISSION
1. Paragraphs 10.2.2, 10.2.3 & 10.4 of DI-MISC-80678 do not apply.
2. Technical content as described in the respective contract line item(s).
3. This certification shall contain the actual Test results of all Chemical
& Mechanical Test required by the Specification
4. The Test results shall be quantitative & in the units required by the specification.
5. For Payment & Submission of Data refer to Clauses 252.232-7006 &
252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
7. In addition to the Certification Data requirements specified in DI-MISC-
STEVE YOUNG Ext: 3207 245.2Z
07/05/2023
07/05/23
| 245.2C-0948-23 |
| SOCKET HEAD CAP SCREW |
| 31784001/SPMYM323Q9020 |
| CERTIFICATION OF QUALITY |
| DI-MISC-81356A |
| SECTION C. 2 |
| CODE 245 |
| DD |
| One Time |
| With Material |
| N/A |
| N/A |
| C002 |
| CERTIFICATION DATA/ REPORT |
| CHEMICAL & MECHANICAL CERTIFICATION |
| DI-MISC-80678 |
| CODE 245 |
| DD |
| One Time |
| With Material |
| N/A |
| N/A |
| N/A |
| CONRAD GAGNE Ext: 3617 245.2C |
| 06/27/2023 |
| 245.2C-0951-23 |
| D |
| SOCKET FLAT COUNTERSUNK HEAD CAP SCREW ANGLE |
| 31784011/SPMYM323Q9020 |
| D001 |
| CERTIFICATE OF COMPLIANCE |
| CERTIFICATION OF QUALITY COMPLIANCE |
| DI-MISC-81356A |
| SECTION C. 2 |
| CODE 245 |
| DD |
| A |
| One Time |
| With Material |
| N/A |
| N/A |
| CHEMICAL & MECHANICAL CERTIFICATION |
| DI-MISC-80678 |
| A |
| SECTION C. 3 |
| CODE 245 |
| N/A |
| N/A |
| N/A |
| 1. Paragraphs 10.2.2, 10.2.3 & 10.4 of DI-MISC-80678 do not apply. |
| CONRAD GAGNE Ext: 3617 245.2C |
| 245.2C-0951-23 |
| E |
| SOCKET FLAT COUNTERSUNK HEAD CAP SCREW ANGLE |
| 31784012/SPMYM323Q9020 |
| E001 |
| CERTIFICATE OF COMPLIANCE |
| CERTIFICATION OF QUALITY COMPLIANCE |
| DI-MISC-81356A |
| SECTION C. 2 |
| CODE 245 |
| DD |
| A |
| One Time |
| With Material |
| N/A |
| N/A |
| CHEMICAL & MECHANICAL CERTIFICATION |
| DI-MISC-80678 |
| A |
| SECTION C. 3 |
| CODE 245 |
| N/A |
| N/A |
| N/A |
| 1. Paragraphs 10.2.2, 10.2.3 & 10.4 of DI-MISC-80678 do not apply. |
| CONRAD GAGNE Ext: 3617 245.2C |
| 245.2C-0951-23 |
| F |
| SOCKET FLAT COUNTERSUNK HEAD CAP SCREW ANGLE |
| 31784013/SPMYM323Q9020 |
| F001 |
| CERTIFICATE OF COMPLIANCE |
| CERTIFICATION OF QUALITY COMPLIANCE |
| DI-MISC-81356A |
| SECTION C. 2 |
| CODE 245 |
| DD |
| A |
| One Time |
| With Material |
| N/A |
| N/A |
| CHEMICAL & MECHANICAL CERTIFICATION |
| DI-MISC-80678 |
| A |
| SECTION C. 3 |
| CODE 245 |
| N/A |
| N/A |
| N/A |
| 1. Paragraphs 10.2.2, 10.2.3 & 10.4 of DI-MISC-80678 do not apply. |
| CONRAD GAGNE Ext: 3617 245.2C |
| 245.2C-0951-23 |
| G |
| SOCKET FLAT COUNTERSUNK HEAD CAP SCREW ANGLE |
| 31784014/SPMYM323Q9020 |
| G001 |
| CERTIFICATE OF COMPLIANCE |
| CERTIFICATION OF QUALITY COMPLIANCE |
| DI-MISC-81356A |
| SECTION C. 2 |
| CODE 245 |
| DD |
| A |
| One Time |
| With Material |
| N/A |
| N/A |
| CHEMICAL & MECHANICAL CERTIFICATION |
| DI-MISC-80678 |
| A |
| SECTION C. 3 |
| CODE 245 |
| N/A |
| N/A |
| N/A |
| 1. Paragraphs 10.2.2, 10.2.3 & 10.4 of DI-MISC-80678 do not apply. |
| CONRAD GAGNE Ext: 3617 245.2C |
File details come from the government source that posted it. Updated .