EQUIPMENT LIST.pdf

EQUIPMENT LIST & SPECIFICATIONS/SPE3SE23Q0546/MCAS Beaufort SC

ITEM #1

2 ea ICE BIN SHUTTLE SYSTEM

Follett Products, LLC Model No. DEV1010SG‐48‐75

Ice‐DevIce™ with SmartCART™ 75, 1000 lb. bin storage capacity, with front chute, poly liner, SmartGATE ice shield, poly door with

PowerHinge™ door hinge, full stainless steel exterior and base, ABS/poly top custom cut for ice machine, includes 82 oz plastic ice scoop, paddle and rake set, and (1) polyethylene cart with hinged lid and (3) polyethylene Totes ice carriers, each carrier holds 25 lb/75 lb total per cart, for cube or Chewblet ice only, NSF

2 ea NOTE: Purchase orders must clearly indicate the make & model of the ice machine(s) being used with the bin to properly prepare the bin top. Lack of this information will delay order processing

2 ea NOTE: Add 8" to depth for lower door assembly (easily removed for installation access)

2 ea NOTE: Height includes legs

2 ea 5 year parts & labor warranty, standard

4 ea 00112771 SmartCART™ 75, mobile, polyethylene, includes 3 totes, 75‐ lb capacity, NSF (Net Price)

ITEM #2

2 ea ICE MAKER, CUBE‐STYLE

Hoshizaki Model No. KM‐1301SAJ

Ice Maker, Cube‐Style, 48"W, air‐cooled, self‐contained condenser, production capacity up to 1365 lb/24 hours at 70°/50° (1301 lb AHRI certified at 90°/70°), crescent cube style, stainless steel exterior, R‐

404A refrigerant, 208‐230v/60/1‐ph, 12.4 amps, NSF, UL

2 ea Warranty: 3‐Year parts & labor on entire machine

2 ea Warranty: 5‐Year parts & labor on evaporator

2 ea Warranty: 5‐Year parts on compressor & air‐cooled condenser

2 ea H9320‐53 Water Filtration System, triple configuration, 19.15" H

(manifold & cartridge)

2 ea Warranty: 1‐Year on entire water filtration system & replaceable elements, standard

ITEM #3

1 ea EQUIPMENT STAND, FOR MIXER / SLICER

Hobart Model No. TABLEHW‐HL2012

Mixer Table; 27”W x 32”D x 26”H, the top shelf is drilled for mounting an HL120 or HL200 mixer, includes 4 posts for storing attachments, a lower shelf for additional storage, & (4) locking 5” diameter wheels

ITEM #4

1 ea WORKTABLE

Nichols Custom Stainless Model No. WORKTABLE

Worktable measures 84" long x 30" wide x 36" high. The top is 14 gauge stainless steel with a marine edge all free sides turned straight down

1‐1/2" and back 1/2" at 60 degrees from vertical. The base of the table is fully open and supported by 1‐5/8" O.D. x .065 thick stainless steel tubular legs fitted with stainless steel leg sockets and adjustable stainless steel bullet feet. The stainless steel crossrail measures 1‐

1/4" O.D. x .065 thick and is continuously welded to the legs at approximately 10" of the finished floor. Price includes (1) section of slides for sheet pans (sheet pans supplied by others)

ITEM #5

6 ea WORKTABLE

Nichols Custom Stainless Model No. WORKTABLE

Worktable measures 84" long x 30" wide x 36" high. The top is 14 gauge stainless steel with a marine edge all free sides turned straight down

1‐1/2" and back 1/2" at 60 degrees from vertical. The base of the table is fully open and supported by 1‐5/8" O.D. x .065 thick stainless steel tubular legs fitted with stainless steel leg sockets and adjustable stainless steel bullet feet.The stainless steel shelf is continuously welded to the legs at approximately 10" off the finished floor with all four sides turned straight down 1‐1/2" and back 1/2" at 60 degrees from vertical.

ITEM #6

2 ea WORKTABLE

Nichols Custom Stainless Model No. WORKTABLE

Worktable measures 120" long x 30" wide x 36" high. The top is 14 gauge stainless steel with a marine edge all free sides turned straight down 1‐1/2" and back 1/2" at 60 degrees from vertical. The base of the table is fully open and supported by 1‐5/8" O.D. x .065 thick stainless steel tubular legs fitted with stainless steel leg sockets and adjustable stainless steel bullet feet The stainless steel shelf is continuously welded to the legs at approximately 10" off the finished floor with all

ITEM #7

8 ea WORKTABLE

Nichols Custom Stainless Model No. WORKTABLE

Worktable measures 60" long x 30" wide x 36" high. The top is 14 gauge stainless steel with a marine edge all free sides turned straight down

1‐1/2" and back 1/2" at 60 degrees from vertical. The base of the table is fully open and supported by 1‐5/8" O.D. x .065 thick stainless steel tubular legs fitted with stainless steel leg sockets and adjustable stainless steel bullet feet .The stainless steel shelf is continuously welded to the legs at approximately 10" off the finished floor with all

ITEM #8

1 ea INSTALL

Custom Model No. INSTALL

Scope of Work:

1. Installer will receive, consolidate, deliver and set in place all cooking/Refrigeration equipment as per equipment list

2. Installer will make all final connections to properly sized existing utilities such as gas, electric and drains within three feet

3. Installer will test the system and make it ready for use

4. Installer will provide all labor between 8:00 A.M. to 4:30 P.M.

Monday through Friday

ITEM #9

1 ea KETTLE, GAS, TILTING

Cleveland Range Model No. KGL25T

Kettle, gas, manual tilting, 25‐gallon capacity, 2/3 steam jacket design, electronic spark ignition, solid‐state control panel, floor mounted control console supports, 304 stainless steel construction with 316 series stainless steel liner, flanged feet, 50 psi rating, cover & draw‐off optional, 90,000 BTU

1 ea 1‐year parts & labor warranty, standard

1 ea Performance start‐up included at customer request after equipment is installed (Free Water Quality Check included) (contact Cleveland Sales

Representative for details)

1 ea Gas type to be specified

1 ea 120v/60/1‐ph, 5.0 amps, electronic spark ignition, cord & plug for controls, standard

1 ea No draw‐off, standard

1 ea SPK22 Single Pantry Faucet And Bracket Kit (KGL25T, KGL40T,KGL60T,KGL80T, KGL40TSH)

ITEM #10

1 ea GAS FLOOR FRYER

Pitco Frialator Model No. SSH55TR

Solstice Supreme™ High Efficiency Fryer, gas, twin tanks, (2) 20 ‐ 25lb oil capacity tanks, solid state controls, boil out & melt cycle, drain valve interlock, matchless ignition, self‐clean burners, downdraft protection, stainless steel tank, front & sides, total 100,000 BTU, CSA

Flame, CSA Star, NSF, CE

1 ea 1 year parts and labor warranty from the date of installation up to a maximum of 15 months from the date of manufacture (with appropriate documentation), standard

1 ea Startup program, for first serial number (submit on request at least 5 business days in advance on Pitco website, https://www.pitco.com/startup_request)

1 ea Gas to be determined

1 ea 115/60/1‐ph, 0.7 amps, NEMA 5‐15P

1 ea (D) Digital Controller

1 ea SSHBNB55 Solstice Supreme™ Bread & Batter Cabinet, with BNB dump station, fryer match design, approximately 15‐5/8" wide, includes 4‐

5/8" recessed pan and screen, standard finish, stainless steel front, sides & door, for SSH55 fryers, NSF

1 ea PFW‐1 Food Warmer, built‐in, 750watt, CSA, NSF, UL

1 ea 120v/60/1‐ph, 6.3 amps, 750 watts, NEMA 5‐15P

1 ea Note: up to 5 fryers with 1 BNB can be in a mix & match battery system, specify location below

1 ea FD‐SSH‐2 Solstice Supreme™ Filter Drawer System, filter drawer design, add suffix /FD to model #, for two fryer (split tanks = two fryers), NSF, CE, CSA Flame, CSA Star, AuGA

1 ea 115/60/1‐ph, 7.0 amps, 1/3 hp, NEMA 5‐15P

1 ea 1st Position location for BNB, no piping charge (BFF)

1 ea P6072145 Basket, (2) oblong/twin size, 13‐1/2" x 6‐1/2" x 5‐3/4" deep, long handle, regular mesh (shipped std (n/c) with models "T" SG14, SG14R, SSH55, SE14, SE14X, SE14B, SG14T, 35+, 45+, fryer batteries shipped with (1) per fryer

ITEM #11

1 ea GAS FLOOR FRYER

Pitco Frialator Model No. SSH60

Solstice Supreme™ High Efficiency Fryer, gas, 50‐60lb oil capacity, full tank, 14"x18" cook area, solid state controls, boil out & melt cycle, drain valve interlock, matchless ignition, self‐clean burners, downdraft protection, stainless steel tank, front & sides, total 80,000

BTU, ENERGY STAR®, CSA Flame, CSA Star, NSF, CE

1 ea 1 year parts and labor warranty from the date of installation up to a maximum of 15 months from the date of manufacture (with appropriate documentation), standard

1 ea Startup program, for each additional serial number at same location

(submit on request at least 5 business days in advance on Pitco website, https://www.pitco.com/startup_request) (NET) priced per each

1 ea Gas to be determined

1 ea 115/60/1‐ph, 0.7 amps, NEMA 5‐15P

1 ea (D) Digital Controller

1 ea SSHBNB75 Solstice Supreme™ Bread & Batter Cabinet, with BNB dump station, fryer match design, approximately 19‐5/8" wide, includes 4‐

5/8" recessed pan and screen, standard finish, stainless steel front, sides & door, for SSH60/75 fryers, NSF

1 ea PFW‐1 Food Warmer, built‐in, 750watt, CSA, NSF, UL

1 ea 120v/60/1‐ph, 6.3 amps, 750 watts, NEMA 5‐15P

1 ea Battery description: 2 fryers plus BNB

1 ea 1st Position location for Bread & Batter dump station (BFF)

1 ea FD‐SSH‐1 Solstice Supreme™ Filter Drawer System, filter drawer design, add suffix /FD to model #, for one fryer (split tanks = two fryers), NSF, CE, CSA Flame, CSA Star, AuGA

1 ea 115/60/1‐ph, 7.0 amps, 1/3 hp, NEMA 5‐15P

1 ea A4500306 Basket, (2) oblong/twin size, 17‐1/4" x 6‐1/2" x 5‐3/4" deep, front handle, regular mesh, (shipped std with models SSH60/60R and

SE148/148R, fryer batteries shipped with (2) per fryer)

1 st B3901504 Casters, 9" adjustable swivel non‐lock rear & lock front casters, for battery of (4) Solstice gas and electric fryers, batteries and retherms

ITEM #12

2 kt BLUE HOSE GAS CONNECTOR KIT

Dormont Manufacturing Model No. 1675KIT48 Packed 1 kt

Dormont Blue Hose™ Moveable Gas Connector Kit, 3/4" inside dia., 48" long, covered with stainless steel braid, coated with blue antimicrobial PVC, (1) SnapFast® QD, (1) full port valve, (2) 90° elbows, coiled restraining cable with hardware, 180,000 BTU/hr minimum flow capacity, limited lifetime warranty

Open Market Accessory

ITEM #13

1 ea REACH‐IN FREEZER

Traulsen Model No. RLT226WUT‐FHS

Spec‐Line Freezer, Reach‐in, two‐section, 40.8 cu. ft., self‐contained refrigeration, StayClear™ Condenser, stainless steel exterior and interior, shallow depth, wide full‐height doors, (3) adjustable wire shelves per section, microprocessor controls, unit can be programmed to operate at ‐10° F, 3/4 HP, cULus, NSF

1 ea 0 degrees Fahrenheit holding temperature, standard

1 ea 115v/60/1‐ph, 14.9 amps, with cord & NEMA 5‐20P, standard

1 ea 3 year service/labor, 5 year compressor warranty, standard

1 ea Left door hinged left/right hinged right, standard

1 st Casters, 6" high (set of 4)

ITEM #14

2 ea COMBI OVEN, GAS

RATIONAL Model No. ICP 6‐FULL/6‐FULL NG 208/240V 1 PH

Two (2) (CC1GRRA.0000238) iCombi Pro® 6‐Full Size Combi Ovens, double stack, natural gas, (12) 18" x 26" sheet pan or (24) 12" x 20" steam pan or (12) 2/1 GN pan capacity, (6) stainless steel grids included, intelligent cooking system with (4) assistants;

iDensityControl, iCookingSuite, iProductionManager, & iCareSystem,

(6) operating modes, (5) cooking methods, (3) manual operating modes, 85° to 572°F temperature range, quick clean, care control, eco mode, 6‐point core temperature probe, retractable hand shower, Ethernet interface, Wi‐Fi enabled, 106,500 BTU each, 208/240v/60/1‐ ph, 6 ft. cord, 0.9 kW each, CE, IPX5, cCSAus, NSF, ENERGY STAR ®

2 kt 60.75.752 Combi‐Duo Universal Stacking Kit, for iCombi 6‐half size or 6‐ full size (electric or gas) on iCombi 6‐full size (gas only)

2 ea 60.31.203 Stand I Stationary Oven Stand for Combi‐Duo, 7‐3/4"H, open sides, for iCombi 6‐full size on 6‐full size

2 ea NOTE: All discounts subject to approval by manufacturer

2 ea 2 years parts and labor, 5 years steam generator warranty

2 ea CAP Chef Assistance Program, a RATIONAL certified Chef conducts 4 hours/location specialized application training with personnel, no charge

4 ea 8720.1560US Installation Kit, for gas iCombi/SCC/CMP 101G

(120/60/1ph); gas iCombi/SCC/CMP 62G (208‐240/60/1ph); gas iCombi/SCC/CMP 61G (120/60/1ph) THIS ITEM IS NON‐DISCOUNTABLE, USA ONLY (NET)

4 ea 1900.1154US Water Filtration Single Cartridge System, for any iVario, single Combi model, or XS or half‐size Combi‐Duos, includes: (1) single head with pressure gauge, R95H filter & filter installation kit

2 ea NOTE: The RATIONAL Water Filtration Systems helps provide consistent high quality water to your RATIONAL cooking systems. The patented carbon block technology reduces the effects of sediment, chloramines and chlorine while providing the required flow rates

ITEM #15

1 ea INSTALLATION

Authorized installer will remove customer's existing equipment to facility dock for disposal by others. Installer will uncrate, set in place, and hook new equipment up to facility provided properly sized utilities with in 5 ft of termination points. Installer will start up and test for proper operations. All generated debris will be placed in a facility supplied container. All work to be done Mon‐Fri 8am‐4pm.

There are no facility upgrades included in this quote.

ITEM #16

FREIGHT