EDR.pdf
PDF 14 KB Posted
- Attached to
- EXCITER, RADIO FREQUENCY Federal contract opportunity
- Solicitation number
- SPRHA5-20-R-0449
- Issued by
- Defense Logistics Agency Aviation
About this file
This document provides engineering data requirements for the manufacture of an RF exciter assembly (UTEM) with part number 1SC5999-0076-1. Key details include specifications that will be used in lieu of indicated data, requirements for unique identification labeling per MIL-STD-130 including human and machine readable formats, and a prohibition on deviations from control drawings without approval. Additionally, the related federal contract opportunity is solicitation number SPRHA5-20-R-0449 from the Defense Logistics Agency Aviation for two RF exciter assemblies, with a first article requirement.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| MQR.pdf | ||
| SPI.pdf | ||
| SPRHA520R0449.pdf | ||
| SOW.pdf | ||
| CPP.pdf | ||
| FA_CDRL.pdf | ||
| EDL.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REV: ENGINEERING DATA REQUIREMENTS
(ATTACHMENT “A”)
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
RF EXCITER ASSEMBLY (UTEM)
2. PART NUMBER:
-1
SC5999-0076-1
3. NATIONAL STOCK NUMBER:
5840-01-625-6969FD
PREPARED BY:
VAL KLEMM
OFFICE SYMBOL:
415 SCMS/GUMBB
DATE:
06/15/2016
HILL AFB FORM 462 Page 1 of 1
4. THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC., WILL BE USED IN LIEU OF THE DATA INDICATED. THE
SUPERSEDED DATA WILL NOT BE FURNISHED UNLESS SO INDICATED.
5. THE SOURCES/MATERIALS IF LISTED ON THE STANDARDS, SPECIFICATION AND DRAWINGS ARE THE ONLY SOURCES/MATERIALS FOR THOSE ITEMS. SUBSTITUTIONS SHALL HAVE PRIOR APPROVAL BY THE COGNIZANT ENGINEERING
ACTIVITY.
6. DEVIATIONS FROM SPECIFICATIONS IDENTIFIED IN CONTROL DRAWINGS ARE NOT AUTHORIZED WITHOUT PRIOR APPROVAL
BY THE COGNIZANT ENGINEERING ACTIVITY.
7. UNIQUE IDENTIFICATION (UID) SHALL BE APPLIED PER MIL-STD-130:
A. MINIMUM 1/8TH INCH ON HUMAN READABLE TO INCLUDE:
1. CAGE (17V)
2. P/N (1P)
3. SERIAL NUMBER (1S)
B. MINIMUM 1/4 INCH SQUARE ON MACHINE READABLE 2D MATRIX – CONSTRUCT 2 – TO
INCLUDE:
1. CAGE (17V)
2. P/N (1P)
3. SERIAL NUMBER (1S)
C. LABEL SHALL CONTAIN ALL DATA ON EXISTING LABEL, IF EXISTING LABEL IS TO BE
REPLACED.
D. SAME LABEL MATERIAL SHALL BE USED AS SPECIFIED IN DRAWING FOR EXISTING
LABEL.
E. MIL-STD-130, ANSI/AIM BCII, ISO 15434, ISO 15415, AND ISO 15418.
File details come from the government source that posted it. Updated .