EDR.pdf
PDF 105 KB Posted
- Attached to
- F-16 Cable and Conduit Assembly Federal contract opportunity
- Solicitation number
- SPRHA423R0130
- Issued by
- Defense Logistics Agency Aviation
About this file
This document provides engineering data requirements for the manufacture of a cable assembly for the F-16 aircraft. It specifies the part number as 2215386-006, national stock number as 6150013713937WF, and lists applicable military specifications and standards for manufacturing, including MIL-STD-2000 for soldering, MIL-STD-130 for unique identification marking, and notification requirements for any lead-free components. The related federal contract opportunity is a solicitation for F-16 cable and conduit assemblies open to approved source BAE Systems CAGE 12436 issued by the Defense Logistics Agency Aviation.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPRHA423R0130_______0001.pdf | ||
| Pkg_SOW.pdf | ||
| EDL.pdf | ||
| SPI.pdf | ||
| SPRHA423R0130.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REV: ENGINEERING DATA REQUIREMENTS
(ATTACHMENT “A”)
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
CABLE ASSY. (F-16)
2. PART NUMBER:
2215386-006
3. NATIONAL STOCK NUMBER:
6150013713937WF
PREPARED BY:
NEAL BOEHMER
OFFICE SYMBOL:
416 SCMS/GUMAA
DATE:
APR. 10, 2021
HILL AFB FORM 462 Page 1 of 2
4. THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC., WILL BE USED IN LIEU OF THE DATA INDICATED. THE SUPERSEDED
DATA WILL NOT BE FURNISHED UNLESS SO INDICATED.
5. THE SOURCE/MATERIAL IF LISTED ON THE STANDARDS, SPECIFICATION AND DRAWINGS ARE THE ONLY SOURCE/MATERIALS FOR THOSE ITEMS. SUBSTITUTIONS SHALL HAVE PRIOR APPROVAL BY THE COGNIZANT ENGINEERING ACTIVITY.
6. DEVIATIONS FROM SPECIFICATIONS IDENTIFIED IN CONTROL DRAWINGS ARE NOT AUTHORIZED WITHOUT PRIOR APPROVAL
BY ENGINEERING.
7. THIS IS AN AIRCRAFT PART. USE THE APPROPRIATE PORTION OF MIL-STD-2000 THAT APPLIES TO AIRCRAFT SOLDERING FOR ALL SOLDERING REQUIREMENTS. *NOTE: J-STD-001 MAY BE USED IN LIEU OF MIL-STD-2000, IF SPECIFICATION MEETS OR
EXCEEDS MIL-STD-2000.
7.1 EFFECTIVE 9 MAY 2005 THE DEPARTMENT OF THE AIR FORCE ISSUED AN AIR WORTHINESS ADVISORY (M-05-01) REGARDING THE USE OF LEAD-FREE SOLDER IN ELECTRICAL AND ELECTRONIC MILITARY PRODUCTS. TO DATE, NO LEAD-FREE SOLDER FORMULATION HAS MATCHED THE RELIABILITY AND PERFORMANCE QUALITIES OF THE STANDARD LEADED SOLDERS. THEREFORE, UNTIL SUCH TIME AS A SUITABLE, RELIABLE LEAD-FREE SOLDER REPLACEMENT IS IDENTIFIED, ALL ELECTRONIC EQUIPMENT SUPPLIERS SHALL CONTINUE TO PROVIDE THE DEPARTMENT OF THE AIR FORCE WITH ITEMS WHICH MEET ALL PERFORMANCE, COMPATIBILITY, AND RELIABILITY STANDARDS PREVIOUSLY ESTABLISHED WITH LEADED SOLDERS.
FAILURE TO DO SO, COULD ADVERSELY IMPACT THE PERFORMANCE AND RELIABILITY OF WEAPON SYSTEMS AFFECTING
NATIONAL SECURITY.
7.2 THE USE OF LEAD-FREE SOLDER OR LEAD-FREE PLATED COMPONENTS IN MILITARY ELECTRONIC PRODUCTS IS CONSIDERED A FLIGHT SAFETY AND NATIONAL SECURITY CONCERN. FOR THIS REASON THE US AIR FORCE WANTS TO BE NOTIFIED WHEN LEAD-FREE COMPONENTS AND MANUFACTURING PROCESSES HAVE BEEN IMPLEMENTED. AS PART OF SATISFACTORY COMPLIANCE WITH THE REQUIREMENTS OF THIS CONTRACT THE US AIR FORCE REQUIRES NOTIFICATION ON A
NO-COST BASIS WHEN ANY OF THE FOLLOWING CONDITIONS EXIST:
1. COMMERCIAL OFF-THE-SHELF (COTS) OR ANY OTHER ELECTRICAL COMPONENTS THAT CONTAIN LEAD-
FREE SOLDER OR LEAD-FREE PLATED COMPONENTS ARE USED IN THE END-ITEM.
2. ANY LEAD-FREE COMPONENT OR PART USED TO MANUFACTURE THE END ITEM THAT IS NOT IDENTIFIED
WITH A SEPARATE PART NUMBER OR DESIGNATION.
7.3 IF NO LEAD-FREE, LEAD-FREE PLATED COTS OR ANY OTHER LEAD-FREE ELECTRICAL OR ELECTRONICS COMPONENTS EXIST IN THE MANUFACTURED END-ITEM, THE CONTRACTOR SHALL PROVIDE WRITTEN CERTIFICATION OF COMPLIANCE AS A
DELIVERABLE WITH THE CONTRACT.
1. USE INDUSTRY STANDARD IPC-1066, "MARKING, SYMBOLS AND LABELS FOR IDENTIFICATION OF LEAD- FREE AND OTHER REPORTABLE MATERIALS IN LEAD-FREE ASSEMBLIES, COMPONENTS AND DEVICES,"
2. INCLUDE THE PROGRAM ENGINEER'S EVALUATION OF THE PURCHASING/REPAIR ITEM FOR ANY "LEAD- FREE" MILITARY PART(S) IN REFERENCE TO ITS' RELIABILITY, PERFORMANCE AND COMPATIBILITY FOR
THE SYSTEM.
REV: ENGINEERING DATA REQUIREMENTS
(ATTACHMENT “A”)
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
CABLE ASSY. (F-16)
2. PART NUMBER:
2215386-006
3. NATIONAL STOCK NUMBER:
6150013713937WF
PREPARED BY:
NEAL BOEHMER
OFFICE SYMBOL:
416 SCMS/GUMAA
DATE:
APR. 10, 2021
HILL AFB FORM 462 Page 2 of 2
8. UNIQUE IDENTIFICATION (UID) SHALL BE APPLIED PER MIL-STD-130 IN LIEU OF FPS-3008:
A. Minimum 1/8th inch on Human readable to include:
1. CAGE (17V)
2. P/N (1P)
3. Serial Number (1S)
B. Minimum 1/4 inch square on Machine Readable 2D Matrix – construct 2 – to include
1. CAGE (17V)
2. P/N (1P)
3. Serial Number (1S)
C. Label shall contain all data on existing label, if existing label is to be replaced.
D. Same Label Material shall be used as specified in drawing for existing label.
E. MIL-STD-130, ANSI/AIM BCII, ISO 15434, ISO 15415, and ISO 15418
File details come from the government source that posted it. Updated .