EDR_0850FD.pdf
PDF 190 KB Posted
- Attached to
- JTE Radar Transmitters Federal contract opportunity
- Solicitation number
- SPRHA5-20-R-0740
- Issued by
- Defense Logistics Agency Aviation
About this file
This document outlines engineering data requirements for the manufacture of radar transmitters for the Defense Logistics Agency Aviation. It specifies the production of three radar transmitters identified by their National Stock Numbers as well as technical data and labeling requirements according to Military Standards. Key components include unique identification labeling per MIL-STD-130 with human and machine readable elements listing the Commercial and Government Entity code, part number, and serial number. The contractor must certify full compliance with referenced drawings, specifications, and standards and obtain approval for any deviations or substitutions.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| EDL_0850FD.pdf | ||
| SPRHA520R0740.pdf | ||
| MQR_4500FD.pdf | ||
| MQR_2542FD.pdf | ||
| CDRL_C001_CPP.pdf | ||
| EDR_2542FD.pdf | ||
| EDL_02542FD.pdf | ||
| SOW.pdf | ||
| MQR_0850FD.pdf | ||
| SPI.pdf | ||
| EDL_4500FD.pdf | ||
| EDR_4500FD.pdf |
Show all 12
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REV: ENGINEERING DATA REQUIREMENTS
(ATTACHMENT “A”)
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
TRANSMITTER,RADAR
2. PART NUMBER:
A9070-023602
3. NATIONAL STOCK NUMBER:
5840-01-659-0850FD
PREPARED BY:
LEVI ALLERY
OFFICE SYMBOL:
415 SCMS/GUEA
DATE:
20200401
HILL AFB FORM 462 Page 1 of 1
4. THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC., WILL BE USED IN LIEU OF THE DATA INDICATED. THE SUPERSEDED DATA
WILL NOT BE FURNISHED UNLESS SO INDICATED.
5. THE SOURCES/MATERIALS IF LISTED ON THE STANDARDS, SPECIFICATION AND DRAWINGS ARE THE ONLY SOURCES/MATERIALS FOR THOSE ITEMS. SUBSTITUTIONS SHALL HAVE PRIOR APPROVAL BY THE COGNIZANT ENGINEERING
ACTIVITY.
6. DEVIATIONS FROM SPECIFICATIONS IDENTIFIED IN CONTROL DRAWINGS ARE NOT AUTHORIZED WITHOUT PRIOR APPROVAL
BY THE COGNIZANT ENGINEERING ACTIVITY.
7. SYSTEM ENGINEER RETAINS ALL RIGHTS TO REVIEW AND ACCEPT DISCREPANT ITEM PRIOR TO SHIPMENT. ANY DEVIATION
FROM THE ENGINEERING DRAWING SHALL BE SUBMITTED FOR ENGINEERING REVIEW AND DISPOSITION.
8. PRIOR TO CONTRACT AWARD, THE CONTRACTOR SHALL CERTIFY TO THE GOVERNMENT IN WRITING FULL COMPLIANCE WITH DRAWINGS, SPECIFICATIONS AND STANDARDS CALLED OUT AND REQUIRED FOR THE MANUFACTURE OF THIS ASSEMBLY. THE CONTRACTOR IS RESPONSIBLE TO COMPLETELY SEARCH THESE DRAWINGS, SPECIFICATIONS AND STANDARDS AND FULLY
UNDERSTAND THE REQUIREMENTS NECESSARY TO MANUFACTURE THE ITEM.
9. UNIQUE IDENTIFICATION (UID) SHALL BE APPLIED PER MIL-STD-130:
A. MINIMUM 1/8TH INCH ON HUMAN READABLE TO INCLUDE:
1. CAGE (17V)
2. P/N (1P)
3. SERIAL NUMBER (1S)
B. MINIMUM 1/4 INCH SQUARE ON MACHINE READABLE 2D MATRIX – CONSTRUCT 2 – TO
INCLUDE:
1. CAGE (17V)
2. P/N (1P)
3. SERIAL NUMBER (1S)
C. LABEL SHALL CONTAIN ALL DATA ON EXISTING LABEL, IF EXISTING LABEL IS TO BE
REPLACED.
D. SAME LABEL MATERIAL SHALL BE USED AS SPECIFIED IN DRAWING FOR EXISTING
LABEL.
E. MIL-STD-130, ANSI/AIM BCII, ISO 15434, ISO 15415, AND ISO 15418.
File details come from the government source that posted it. Updated .