Revised_Connection_Box_SOW.pdf

NOAA Ship Henry B. Bigleow Shore Power Connection Box

June 2016

Shore Power Connection Box Replacement

1. Work Description – Includes labor, material, and equipment to procure and assemble a new shore power connection box.

2. References

(a) None

3. Government Furnished Material

3.1 None

4. Work Requirements

4.1 Provide one (1) 316 stainless steel shore power enclosure measuring approximately 72 inches high by 36 inches wide by 18 inches deep with two (2) each MIL-C-24368/2 shore power receptacles with no mating plugs to include the following:

Qty Part Number Description Current Manufacturer

2 N/A Shore Power Receptacle, Mil Spec

MIL-C-24368/2

40 N/A Cable, 400 MCM EPDM, 40 Feet 1 N/A Potting Compound Kit 2 N/A Circuit Breaker, LI 35 KA, 3P 400A Cutler Hammer 4 N/A Breaker Lugs, 500MCM Cutler Hammer 2 N/A Operating Handle, 400AF NEMA 4 Cutler Hammer 4 B050BTZ13JK Transformer, 150VA 480:120V MICRON 2 CR104PLG22W Light, Power Available, White GE 2 256-PLDU Relay, Sync Check Crompton 2 CR104PBG01U1 Push Button with 1 NC Contact GE 2 077-12PA-P2C6 Phase Sequence Meter Crompton

1 GLF1-

72EL3618SS6FS

Enclosure, 72"X36"X18" NEMA 4X SCE

1 N/A Waterproof Cover Vicknair

4.2 Assemble all components in the new enclosure and wire up all components. The completely outfitted enclosure shall be similar to the existing shore power connection box. The upper and lower door closer devises as well as the door handle shall be stainless steel. See Figures 1, 2 and 3.

Generic Generic Generic

June 2016

Figure 1 – Connection Box Exterior Figure 2 – Connection Box Exterior

Figure 3 – Connection Box Interior

4.3 Provide and install two (2) kilowatt hour (kWh) consumption meters on the new enclosure door to allow the ship to track shore power usage. Wire up new consumption meters per manufacturer’s instructions.

June 2016

5. Quality Assurance

5.1 COR inspection.

6. Notes

6.1 The shore power connection box will be delivered to the following address:

NOAA Ship Henry B. Bigelow Naval Station Newport 47 Chandler Street Newport, RI 02841 Attn: Chief Engineer

6.2 The original manufacturer of the existing shore power connection box was:

Gulf Coast Power and Control, Inc.

64080 Hwy. 1090 Pearl River, La 70452 Tele: 985-863-2336 Fax: 985-863-2346

END OF SPECIFICATION