E M6700123Q1155-0001.docx

M6700123Q1155

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 1449 - CONTINUATION SHEET

SOLICITATION/CONTRACT FORM

The required response date/time has changed from 23-Jun-2023 04:00 PM to 10-Jul-2023 04:00 PM.

SUPPLIES OR SERVICES AND PRICES

CLIN 0003 is added as follows:

Maintenance Services

FFP

Maintenance on Fortus F370 3D Plastic Printer, S/N D31722, P/N 123-30001 in accordance with Performance Work Statement.

NWA 300000169266.0270

FOB: Destination

MILSTRIP: N6592323SU00121

PSC CD: J052

NET AMT

CLIN 1003 is added as follows:

Maintenance on Fortus F370 3D Plastic Printer, S/N D31722, P/N 123-30001 in accordance with Performance Work Statement.

FOB: Destination

NET AMT

CLIN 2003 is added as follows:

Maintenance on Fortus F370 3D Plastic Printer, S/N D31722, P/N 123-30001 in accordance with Performance Work Statement.

NET AMT

DELIVERIES AND PERFORMANCE

The following Delivery Schedule item for CLIN 0002 has been changed from:

JAMES HARRUP

FLEET READINESS CENTER EAST DLA

BEACHY RD. BUILDING 148, BAY C

CHERRY POINT NC 28533-5040

252-464-8602

N65923

To:

JAMES HARRUP

FLEET READINESS CENTER EAST DLA

BEACHY RD. BUILDING 148, BAY C

CHERRY POINT NC 28533-5040

252-464-8602

N65923

The following Delivery Schedule for CLIN 0003 has been added:

JAMES HARRUP

FLEET READINESS CENTER EAST DLA

BEACHY RD. BUILDING 148, BAY C

CHERRY POINT NC 28533-5040

252-464-8602

N65923

The following Delivery Schedule item for CLIN 1001 has been changed from:

JAMES HARRUP

FLEET READINESS CENTER EAST DLA

BEACHY RD. BUILDING 148, BAY C

CHERRY POINT NC 28533-5040

252-464-8602

N65923

JAMES HARRUP

FLEET READINESS CENTER EAST DLA

BEACHY RD. BUILDING 148, BAY C

CHERRY POINT NC 28533-5040

252-464-8602

N65923

The following Delivery Schedule item for CLIN 1002 has been changed from:

JAMES HARRUP

FLEET READINESS CENTER EAST DLA

BEACHY RD. BUILDING 148, BAY C

CHERRY POINT NC 28533-5040

252-464-8602

N65923

JAMES HARRUP

FLEET READINESS CENTER EAST DLA

BEACHY RD. BUILDING 148, BAY C

CHERRY POINT NC 28533-5040

252-464-8602

N65923

The following Delivery Schedule for CLIN 1003 has been added:

JAMES HARRUP

FLEET READINESS CENTER EAST DLA

BEACHY RD. BUILDING 148, BAY C

CHERRY POINT NC 28533-5040

252-464-8602

N65923

The following Delivery Schedule item for CLIN 2001 has been changed from:

JAMES HARRUP

FLEET READINESS CENTER EAST DLA

BEACHY RD. BUILDING 148, BAY C

CHERRY POINT NC 28533-5040

252-464-8602

N65923

JAMES HARRUP

FLEET READINESS CENTER EAST DLA

BEACHY RD. BUILDING 148, BAY C

CHERRY POINT NC 28533-5040

252-464-8602

N65923

The following Delivery Schedule item for CLIN 2002 has been changed from:

JAMES HARRUP

FLEET READINESS CENTER EAST DLA

BEACHY RD. BUILDING 148, BAY C

CHERRY POINT NC 28533-5040

252-464-8602

N65923

JAMES HARRUP

FLEET READINESS CENTER EAST DLA

BEACHY RD. BUILDING 148, BAY C

CHERRY POINT NC 28533-5040

252-464-8602

N65923

The following Delivery Schedule for CLIN 2003 has been added:

JAMES HARRUP

FLEET READINESS CENTER EAST DLA

BEACHY RD. BUILDING 148, BAY C

CHERRY POINT NC 28533-5040

252-464-8602

N65923

INSPECTION AND ACCEPTANCE

The following Acceptance/Inspection Schedule was added for CLIN 0003:

The following Acceptance/Inspection Schedule was added for CLIN 1003:

The following Acceptance/Inspection Schedule was added for CLIN 2003:

The following have been added by full text:

52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS--COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (JUN 2023)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities (NOV 2021) (Section 1634 of Pub. L. 115-91).

(3) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (NOV 2021) (Section 889(a)(1)(A) of Pub. L. 115-232).

(4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (NOV 2015).

(5) 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (MAR 2023) (31 U.S.C. 3903 and 10 U.S.C. 3801).

(6) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553).

(7) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws 108-77 and 108-78 (19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services: [Contracting Officer check as appropriate.]

___ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (JUN 2020), with Alternate I (NOV 2021) (41 U.S.C. 4704 and 10 U.S.C. 4655).

___ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (NOV 2021) (41 U.S.C. 3509).

___ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (JUN 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

XX (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (JUN 2020) (Pub. L. 109-282) (31 U.S.C. 6101 note).

___ (5) [Reserved]

___ (6) 52.204-14, Service Contract Reporting Requirements (OCT 2016) (Pub. L. 111-117, section 743 of Div. C).

___ (7) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (OCT 2016) (Pub. L. 111-117, section 743 of Div. C).

XX (8) 52.204-27, Prohibition on a ByteDance Covered Application (JUN 2023) (Section 102 of Division R of Pub. L. 117-328).

XX (9) 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (NOV 2021) (31 U.S.C. 6101 note).

___ (10) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (OCT 2018) (41 U.S.C. 2313).

____ (11) [Reserved]

____ (12) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (OCT 2022) (15 U.S.C. 657a).

XX (13) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (OCT 2022) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).

____ (14) [Reserved]

____ (15)(i) 52.219-6, Notice of Total Small Business Set-Aside (NOV 2020) (15 U.S.C. 644).

____ (ii) Alternate I (MAR 2020) of 52.219-6.

____ (16)(i) 52.219-7, Notice of Partial Small Business Set-Aside (NOV 2020) (15 U.S.C. 644).

____ (ii) Alternate I (MAR 2020) of 52.219-7.

____ (17) 52.219-8, Utilization of Small Business Concerns (OCT 2022) (15 U.S.C. 637(d)(2) and (3)).

____ (18)(i) 52.219-9, Small Business Subcontracting Plan (OCT 2022) (15 U.S.C. 637(d)(4)).

____ (ii) Alternate I (NOV 2016) of 52.219-9.

____ (iii) Alternate II (NOV 2016) of 52.219-9.

____ (iv) Alternate III (JUN 2020) of 52.219-9.

____ (v) Alternate IV (SEP 2021) of 52.219-9.

____ (19) (i) 52.219-13, Notice of Set-Aside of Orders (MAR 2020) (15 U.S.C. 644(r)).

____ (ii) Alternate I (MAR 2020) of 52.219-13.

____ (20) 52.219-14, Limitations on Subcontracting (OCT 2022) (15 U.S.C. 657s).

____ (21) 52.219-16, Liquidated Damages—Subcontracting Plan (SEP 2021) (15 U.S.C. 637(d)(4)(F)(i)).

____ (22) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (OCT 2022) (15 U.S.C. 657f).

XX (23) (i) 52.219-28, Post-Award Small Business Program Rerepresentation (MAR 2023) (15 U.S.C. 632(a)(2)).

____ (ii) Alternate I (MAR 2020) of 52.219-28.

____ (24) 52.219-29, Notice of Set-Aside for, or Sole-Source Award to, Economically Disadvantaged Women-Owned Small Business Concerns (OCT 2022) (15 U.S.C. 637(m)).

____ (25) 52.219-30, Notice of Set-Aside for, or Sole-Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (OCT 2022) (15 U.S.C. 637(m)).

____ (26) 52.219-32, Orders Issued Directly Under Small Business Reserves (MAR 2020) (15 U.S.C. 644(r)).

____ (27) 52.219-33, Nonmanufacturer Rule (SEP 2021) (15 U.S.C. 657s).

XX (28) 52.222-3, Convict Labor (JUN 2003) (E.O. 11755).

____ (29) 52.222-19, Child Labor--Cooperation with Authorities and Remedies (DEC 2022) (E.O. 13126).

XX (30) 52.222-21, Prohibition of Segregated Facilities (APR 2015).

XX (31)(i) 52.222-26, Equal Opportunity (SEP 2016) (E.O. 11246).

____ (ii) Alternate I (FEB 1999) of 52.222-26.

XX (32)(i) 52.222-35, Equal Opportunity for Veterans (JUN 2020) (38 U.S.C. 4212).

____ (ii) Alternate I (JUL 2014) of 52.222-35.

XX (33)(i) 52.222-36, Equal Opportunity for Workers with Disabilities (JUN 2020) (29 U.S.C. 793).

____ (ii) Alternate I (JUL 2014) of 52.222-36.

____ (34) 52.222-37, Employment Reports on Veterans (JUN 2020) (38 U.S.C. 4212).

____ (35) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (DEC 2010) (E.O. 13496).

XX (36)(i) 52.222-50, Combating Trafficking in Persons (NOV 2021) (22 U.S.C. chapter 78 and E.O. 13627).

____ (ii) Alternate I (MAR 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

____ (37) 52.222-54, Employment Eligibility Verification (MAY 2022). (E. O. 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial products or commercial services as prescribed in FAR 22.1803.)

____ (38)(i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA–Designated Items (MAY 2008) (42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

____ (ii) Alternate I (MAY 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

____ (39) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (JUN 2016) (E.O. 13693).

____ (40) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (JUN 2016) (E.O. 13693).

____ (41)(i) 52.223-13, Acquisition of EPEAT® Registered Imaging Equipment (JUN 2014) (E.O.s 13423 and 13514).

____ (ii) Alternate I (OCT 2015) of 52.223-13.

____ (42)(i) 52.223-14, Acquisition of EPEAT® Registered Televisions (JUN 2014) (E.O.s 13423 and 13514).

____ (ii) Alternate I (JUN 2014) of 52.223-14.

____ (43) 52.223-15, Energy Efficiency in Energy-Consuming Products (MAY 2020) (42 U.S.C. 8259b).

____ (44)(i) 52.223-16, Acquisition of EPEAT®-Registered Personal Computer Products (OCT 2015) (E.O.s 13423 and 13514).

____ (ii) Alternate I (JUN 2014) of 52.223-16.

XX (45) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (JUN 2020) (E.O. 13513).

____ (46) 52.223-20, Aerosols (JUN 2016) (E.O. 13693).

____ (47) 52.223-21, Foams (JUN 2016) (E.O. 13693).

____ (48)(i) 52.224-3, Privacy Training (JAN 2017) (5 U.S.C. 552a).

____ (ii) Alternate I (JAN 2017) of 52.224-3.

____ (49) (i) 52.225-1, Buy American--Supplies (OCT 2022) (41 U.S.C. chapter 83).

____ (ii) Alternate I (OCT 2022) of 52.225-1.

____ (50)(i) 52.225-3, Buy American-Free Trade Agreements-Israeli Trade Act (DEC 2022) (19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, 19 U.S.C. chapter 29 (sections 4501-4732), Public Law 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43.

____ (ii) Alternate I [Reserved].

____ (iii) Alternate II (DEC 2022) of 52.225-3.

____ (iv) Alternate III (JAN 2021) of 52.225-3.

____ (v) Alternate IV (OCT 2022) of 52.225-3.

____ (51) 52.225-5, Trade Agreements (DEC 2022) 19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

____ (52) 52.225-13, Restrictions on Certain Foreign Purchases (FEB 2021) (E.O.'s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

____ (53) 52.225-26, Contractors Performing Private Security Functions Outside the United States (OCT 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. Subtitle A, Part V, Subpart G Note).

____ (54) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (NOV 2007) (42 U.S.C. 5150

____ (55) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (NOV 2007) (42 U.S.C. 5150).

____ (56) 52.229-12, Tax on Certain Foreign Procurements (FEB 2021).

____ (57) 52.232-29, Terms for Financing of Purchases of Commercial Products and Commercial Services (NOV 2021) (41 U.S.C. 4505, 10 U.S.C. 3805).

____ (58) 52.232-30, Installment Payments for Commercial Products and Commercial Services (NOV 2021) (41 U.S.C. 4505, 10 U.S.C. 3805).

____ (59) 52.232-33, Payment by Electronic Funds Transfer—System for Award Management (OCT 2018) (31 U.S.C. 3332).

____ (60) 52.232-34, Payment by Electronic Funds Transfer—Other than System for Award Management (JUL 2013) (31 U.S.C. 3332).

____ (61) 52.232-36, Payment by Third Party (MAY 2014) (31 U.S.C. 3332).

____ (62) 52.239-1, Privacy or Security Safeguards (AUG 1996) (5 U.S.C. 552a).

____ (63) 52.242-5, Payments to Small Business Subcontractors (JAN 2017)(15 U.S.C. 637(d)(13)).

____ (64)(i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (NOV 2021) (46 U.S.C. 55305 and 10 U.S.C. 2631).

____ (ii) Alternate I (APR 2003) of 52.247-64.

____ (iii) Alternate II (NOV 2021) of 52.247-64.

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services: [Contracting Officer check as appropriate.]

XX (1) 52.222-41, Service Contract Labor Standards (AUG 2018) (41 U.S.C. chapter 67).

XX (2) 52.222-42, Statement of Equivalent Rates for Federal Hires (MAY 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

XX (3) 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards--Price Adjustment (Multiple Year and Option Contracts) (AUG 2018) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

_____ (4) 52.222-44, Fair Labor Standards Act and Service Contract Labor Standards--Price Adjustment (MAY 2014) (29 U.S.C 206 and 41 U.S.C. chapter 67).

_____ (5) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (MAY 2014) (41 U.S.C. chapter 67).

_____ (6) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services--Requirements (MAY 2014) (41 U.S.C. chapter 67).

XX (7) 52.222-55, Minimum Wages for Contractor Workers Under Executive Order 14026 (JAN 2022) (E.O. 13658).

XX (8) 52.222-62, Paid Sick Leave Under Executive Order 13706 (JAN 2022) (E.O. 13706).

_____ (9) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (JUN 2020) (42 U.S.C. 1792).

(d) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, as defined in FAR 2.101, on the date of award of this contract, and does not contain the clause at 52.215-2, Audit and Records--Negotiation.

(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor's directly pertinent records involving transactions related to this contract.

(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.

(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.

(e) (1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c), and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1) in a subcontract for commercial products or commercial services. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause—

(i) 52.203-13, Contractor Code of Business Ethics and Conduct (NOV 2021) (41 U.S.C. 3509).

(ii) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(iii) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities (NOV 2021) (Section 1634 of Pub. L. 115-91).

(iv) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (NOV 2021) (Section 889(a)(1)(A) of Pub. L. 115-232).

(v) 52.204-27, Prohibition on a ByteDance Covered Application (JUN 2023) (Section 102 of Division R of Pub. L. 117-328).

(vi) 52.219-8, Utilization of Small Business Concerns (OCT 2022) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds the applicable threshold specified in FAR 19.702(a) on the date of subcontract award, the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.

(vii) 52.222-21, Prohibition of Segregated Facilities (APR 2015).

(viii) 52.222-26, Equal Opportunity (SEP 2016) (E.O. 11246).

(ix) 52.222-35, Equal Opportunity for Veterans (JUN 2020) (38 U.S.C. 4212).

(x) 52.222-36, Equal Opportunity for Workers with Disabilities (JUN 2020) (29 U.S.C. 793).

(xi) 52.222-37, Employment Reports on Veterans (JUN 2020) (38 U.S.C. 4212).

(xii) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (DEC 2010) (E.O. 13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40.

(xiii) 52.222-41, Service Contract Labor Standards (AUG 2018), (41 U.S.C. chapter 67).

(xiv) _____ (A) 52.222-50, Combating Trafficking in Persons (NOV 2021) (22 U.S.C. chapter 78 and E.O. 13627).

_____ (B) Alternate I (MAR 2, 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

(xv) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (MAY 2014) (41 U.S.C. chapter 67.)

(xvi) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services--Requirements (MAY 2014) (41 U.S.C. chapter 67)

(xvii) 52.222-54, Employment Eligibility Verification (MAY 2022) (E. O. 12989).

(xviii) 52.222-55, Minimum Wages for Contractor Workers Under Executive Order 14026 (JAN 2022) (E.O. 13658).

(xix) 52.222-62, Paid Sick Leave Under Executive Order 13706 (JAN 2022) (E.O. 13706).

(xx) (A) 52.224-3, Privacy Training (JAN 2017) (5 U.S.C. 552a).

(B) Alternate I (JAN 2017) of 52.224-3.

(xxi) 52.225-26, Contractors Performing Private Security Functions Outside the United States (OCT 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. Subtitle A, Part V, Subpart G Note).

(xxii) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (JUN 2020) (42 U.S.C. 1792). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6.

(xxiii) 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (MAR 2023) (31 U.S.C. 3903 and 10 U.S.C. 3801). Flow down required in accordance with paragraph (c) of 52.232-40.

(xxiv) 52.247-64, Preference for Privately-Owned U.S. Flag Commercial Vessels (NOV 2021) (46 U.S.C. 55305 and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64.

(2) While not required, the Contractor may include in its subcontracts for commercial products and commercial services a minimal number of additional clauses necessary to satisfy its contractual obligations.

(End of clause)

The following have been modified:

ADDENDUM TO FAR 52.212-1

1) Submission of Quote

a. The vendor is responsible for ensuring that quotes are received in the Contracting Office no later than 4:00 P.M. (EDT) on 10 July 2023 as indicated on page one (1) of this solicitation. Failure of vendor’s quote to be received prior to the hour and date specified may result in rejection of the quote.

b. Quotes shall be submitted electronically via email jeffrey.penny@usmc.mil.

c. RFQ Number M6700123Q1155 must be clearly shown in the subject line.

2) Instruction for the Preparation of Quotes: The vendor shall submit the following as part of their quote:

a. Information that demonstrates the vendor’s ability to provide the service in accordance with the requirements of the Performance Work Statement within the required Period of Performance (POP).

b. Quote firm-fixed price for each line item shown – for completion of all supplies/services in accordance with the requirements of the Performance Work Statement.

c. Vendor must include unit price and total amount for each line item. Vendor shall quote FOB Destination pricing.

d. Completed SF1449 to include

i. Signed/completed page 1 (Blocks 17 and 30)

ii. Completed Representations and Certifications: The following representations and certifications must be completed and returned as part of the vendor’s quote

FAR 52.212-3 (Note that vendor is only required to complete paragraph (b) if they have not completed annual representations and certifications via the System for Award Management (SAM) website.)

e) Past Performance

0. Vendor may submit at least (3) relevant past performance references. Relevant past performance is defined as performance of contracts similar in technical complexity to this requirement. Include the following information for each contract listed:

0. Agency or company name

0. Contract Number (if applicable)

0. Point of Contact name and phone number

0. Brief description of each contract and relevance to this requirement

0. Total contract value

0. Period of Performance

0. If the vendor has not relevant past performance history, a vendor must affirmatively state that is posses no relevant past performance history.

OPTIONS SUMMARY

PURPOSE: The purpose of this action is to establish a Contract for the Maintenance of Fortus 400mc and 900mc 3D printers, as required for Fleet Readiness Center East, aboard Marine Corp Air Station (MCAS), Cherry Point, NC. All service shall be performed in accordance with the Performance Work Statement.

TERM OF CONTRACT: The contractor shall provide the services specified herein for a base period of twelve (12) months, with provisions for two (2) twelve (12) month option periods. The option periods may be exercised at the discretion of the Government in accordance with FAR 52.217-9 “Option to Extend the Term of the Contract” (MAR 2000).

PERIODS OF PERFORMANCE AND VALUE: The periods of performance and dollar values for each are as follows:

Base Period

CLIN 0001

CLIN 0002

CLIN 0003 $ ________________

12 Months ADC

First Option Year

CLIN 1001

CLIN 1002

CLIN 1003 $ ________________

Second Option Year

CLIN 2001

CLIN 2002

CLIN 2003 $ ________________

* TOTAL ESTIMATED VALUE *$ ________________

* To be provided at time of Award.

PERFORMANCE WORK STATEMENT

1. SCOPE: This Performance Work Statement (PWS) identifies supplies and services to provide a base contract with two (2) option years, service agreement for Government owned Fortus 3D Printers (F370, 400mc and 900mc) at Fleet Readiness Center East, PSC Box 8021, Cherry Point, NC 28533. The Contractor shall have full knowledge of the referenced equipment, shall have all required technical manuals, and shall be able to perform all work in-compliance with the Original Equipment Manufacturers (OEM) technical specifications, in accordance with this PWS. All services are to be performed in a highly professional manner.

2. APPLICABLE DOCUMENTS: Available upon Request

2.1.1 OPNAVINST 3960.16A (N43) NAVY TEST, MEASUREMENT, AND DIAGNOSTIC EQUIPMENT (TMDE), AUTOMATIC TEST SYSTEMS (ATS), AND METROLOGY AND CALIBRATION (METCAL)

2.1.2 NAVAIRINST 13640.1B (AIR-3.9.2) NAVAL AVIATION METROLOGY AND CALIBRATION PROGRAM

3. REQUIREMENTS

3.1. The contractor shall exercise commercially reasonable efforts to provide maintenance services, which shall include the corresponding service elements for the Stratasys Emerald Care Direct Service Plan for one (1) F370 3D Plastic Printer, one (1) 400mc 3D Plastic Printer and one (1) 900mc 3D Plastic Printer. Under this service plan, the contractor shall at a minimum provide the following:

1. Phone Support: 0800-1700 Monday-Friday

1. On-Site Emergency Support: Within 3 business days.

1. On-Site preventive maintenance performed at factory recommended maintenance intervals. These procedures shall be completed in conjunction with unscheduled or emergency visits.

1. Preventive maintenance kit included

1. Priority service scheduling

1. Replacement of all defective or worn machine parts. Spare parts are included. Service consumables are excluded. Uptime kit shall be included for PolyJet only,

1. Stratasys-developed software maintenance releases provided throughout the maintenance period.

3.2 Preventive Maintenance:

1. The contractor shall perform a preventive maintenance program that follows the manufacturer’s recommended maintenance intervals; the contractor shall submit a preventative plan for approval within 30 days after contract is awarded.

3.3 Inspection:

1. Following completion of preventive maintenance services, inspection and alignment of the printer head and computer operation system shall be undertaken and completed in-keeping with the technical specifications and directives of the Original Equipment Manufacturer (OEM), and must be performed prior to beginning the calibration procedure.

1. Inspection shall be required for the respective Government owned 3D printers, and Inspection shall be documented by the field service engineer.

3.4 Alignment / Calibration

1. Alignment/Calibration shall be required prior to undertaking and/or completing calibration of the asset.

1. The Government shall not provide any test equipment or tools for completion of the PM, alignment, or calibration procedures.

1. The Contractor shall procure, purchase, and install Ground Guard Power Conditioner unit(s) preventing ground loops causing catastrophic failures.

3.5 Emergency Service Visits:

1. The contractor shall provide 2 Emergency visits and are defined as unscheduled trouble calls to the contractor when the printer unit is considered “Off-Line” causing a work stoppage. The contractor shall be notified and respond within a twenty-four (24) hour notice and provide all parts necessary to regain operability of the printer unit.

3.6 Software Maintenance Releases /Hardware updates (excluding upgrades)

1. The contractor shall make available and install unlimited software maintenance and hardware updates during scheduled preventative maintenance releases or during any emergency service call visit.

3.7 Equipment:

Fortus 400mc 3D Plastic Printer Model: 400mc Large Part Number: 211-00201 Serial Number: T1575 Asset Number: 65923-082234

Fortus 900mc 3D Plastic Printer Model: 900mc Large Part Number: 225-00200 Serial Number: L0245 Asset Number: 65923-082934

Fortus F370 3D Plastic Printer Model: F370 Part Number: 123-30001 Serial Number: D31722 Asset Number: 65923-080949

3.8 During any service visit by the contractor, the Government shall provide a trained operator to perform duties consistent with their regular job description for the assistance of the contractor.

3.9 The contractor shall provide to the Government a formal quote for any parts necessary for the repair or continued operation of the machinery. The contractor shall provide standard commercial warranty with any parts installed on the machinery. Warranty claims for any part of the system shall be from the Government to the contractor. The contractor shall offer replacement parts that are under warranty at no additional cost to the Government. The contractor shall not force the Government to place a warranty claim to any third party outside of this agreement.

3.10 The contractor shall notify the Government of any activity that may cause a loss or corruption of data. The contractor shall advise the Government of necessary mitigation procedures that must be followed to protect sensitive data. The contractor shall not continue work until all mitigation procedures have been satisfactorily completed by the Government.

3.11 The contractor shall notify the Government of any extraordinary repair deemed to be outside the scope of this agreement. The Government shall attempt to reach a separate agreement for such repair.

4. CERTIFICATE OF CONFORMANCE:

In-keeping with FAR 52.246-15, FRC-E is requesting that upon completion of the contractually identified terms and specifications, and prior to seeking compensation for services rendered, the Contractor shall complete and submit a Certificate of Conformance attesting to having met all requirements cited in the order, for “supplies and services.”

4.1 Field Service Report

4.1.1 The contractor shall check in upon arrival and check out prior to departure with the Equipment, Facilities & Services Specialist located in Building 84. In conjunction with each calibration procedure, the Contractor shall provide the Equipment, Facilities & Services Specialist with a detailed “Field Service Report” (FSR). The report shall include, but is not limited to:

1. Date and time notified

1. Date and time of arrival

1. Type, Model and Serial Number(s) of equipment

1. Location of machines

1. Description of malfunction(s) and/or condition

1. Identified cause of the malfunction (if applicable)

1. All actions taken to correct the problem, including repair parts replaced or services rendered to include quantities

1. Time to Acquire replacement parts (if applicable)

1. Parts showing nominal wear must be noted by part number, stating degree of wear and listed

1. Parts showing excessive wear and making operational verification of the system or a sub-system unobtainable must be identified and reported

1. Date and time of departure

4.2 The cited report and/or “original” Certificate(s) of Calibration shall be sent using traceable means, via U.S. Postal mail or expedited courier service (i.e. Fed-Ex, UPS, etc.), to the indicated DGR within SEVEN (7) Days, following the completion of maintenance services.

5. The Customer Point of Contacts:

Technical:

Primary: James Harrup james.p.harrup.civ@us.navy.mil 252-464-8602

52.212-2 EVALUATION--COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (NOV 2021)

(a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers:

The award will be made using simplified acquisition procedure and the best value process. For this reason, the final award decision may be made to other than lowest priced or highest technically rated quote. To determine the best value, a comparative assessment of the offeror’s price and other non-price factors (i.e. technical ability, past performance, and other evaluation factors identified elsewhere in this solicitation) will be conducted.

(b) Options. The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s).

(c) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

(End of provision)

The following have been deleted:

BASIS FOR AWARD

(End of Summary of Changes) image1.wmf