Data Requirements 4004.pdf
PDF 81 KB Posted
- Attached to
- Hardware Federal contract opportunity
- Solicitation number
- SPMYM324Q4004
About this file
This document is a Contract Data Requirements List outlining two data items required under a federal contract for flat socket head self-locking cap screws with the Defense Logistics Agency Land and Maritime. The contractor must submit a Certificate of Compliance with the material certifying quality compliance. Additionally, the contractor must provide a Certification Data/Report containing actual chemical and mechanical test results for the screws in the required units, showing evidence of testing the correct number of specimens for each required test. Both items are due with material delivery. The solicitation number for the related federal contract opportunity to supply the hardware is SPMYM324Q4004.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Security Agreement For Protection of NNPI 4004.docx | DOCX document | |
| FAR-DLAD-Local Notes and Clauses 4004.docx | DOCX document | |
| Combined Synopsis Solicitation Hardware SPMYM324Q4004.docx | DOCX document |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CONTRACT DATA REQUIREMENTS LIST
245.2C-1021-23 (2 DATA ITEMS)
A. CONTRACT LINE ITEM NO. B. EXHIBIT
A
C. CATEGORY
TDP X TM ______ OTHER______
D. SYSTEM/ITEM
FLAT SOCKET HEAD SELF-LOCKING
CAP SCREW
E. CONTRACT/PR NO.
3274404
F. CONTRACTOR
1. DATA ITEM NO.
A001
2. TITLE of DATA ITEM
CERTIFICATE OF COMPLIANCE
3. SUBTITLE
CERTIFICATION OF QUALITY
COMPLIANCE
4. AUTHORITY(DATA Item Description Number)
DI-MISC-81356A
5. CONTRACT REFERENCE
SECTION C. 2
6. REQUIRING OFFICE
CODE 245
7. DD 250 REQ
DD
9. DIST
STATEMENT
REQUIRED
A
10. FREQUENCY
One Time
12. DATE OF 1st
SUBMISSION
With Material
14. DISTRIBUTION
a. ADDRESSEE b. COPIES
DRAFT FINAL
8. APP. CODE
N/A
11. AS OF DATE
13. DATE OF
SUBSEQUENT
SUBMISSION
N/A
REG REPRO
133.2 0 1 0
16 REMARKS
1. Technical content as described in the respective contract line item(s).
2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
0 0 0
15. TOTAL 0 1 0
1.DATA ITEM NO.
A002
2 TITLE of DATA ITEM
CERTIFICATION DATA / REPORT
3. SUBTITLE
CHEMICAL & MECHANICAL CERTIFICATION
4. AUTHORITY
DI-MISC-80678
5. CONTRACT REFERENCE
SECTION C. 3
6. REQUIRING OFFICE
CODE 245
7. DD 250 REQ
DD
9. DIST
STATEMENT
REQUIRED
A
10. FREQUENCY
One Time
12. DATE OF 1st
SUBMISSION
With Material
14. DISTRIBUTION
a. ADDRESSEE b. COPIES
DRAFT FINAL
8. APP. CODE
11. AS OF DATE
13. DATE OF
SUBSEQUENT
SUBMISSION
N/A
REG REPRO
133.2 0 1 0
16 REMARKS
1. Paragraphs 10.2.2, 10.2.3 & 10.4 of DI-MISC-80678 do not apply.
2. Technical content as described in the respective contract line item(s).
3. This certification shall contain the actual Test results of all Chemical &
Mechanical Test required by the Specification
4. The Test results shall be quantitative & in the units required by the specification.
5. For Payment & Submission of Data refer to Clauses 252.232-7006 &
252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
7. In addition to the Certification Data requirements specified in DI-MISC- 80678, the requirements of the contract section titled, Marking and
0 0 0
15. TOTAL 0 1 0
G. PREPARED BY
CONRAD GAGNE Ext: 3617 245.2C
H. DATE
07/18/2023
I. APPROVED BY 245.2
X
J. DATE
08/03/23
File details come from the government source that posted it. Updated .