BEP-RFQ-16-0749.pdf

1 BEP-RFQ-16-0749

FBO Posting: Combined Synopsis/Solicitation

FBO Title: Reach Fork Lift Trucks

Notice No: BEP-RFQ-16-0749

Set-aside: Unrestricted

PSC: 39- Materials Handling Equipment

NAICS: 333924 - Industrial Truck, Tractor, Trailer, and Stacker Machinery Manufacturing

(i) This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart12.6 as supplemented with additional information included in this notice.

This announcement constitutes the only solicitation; proposals are being requested and written solicitation will not be issued.

(ii) Solicitation number is BEP-RFQ-16-0749 and is issued as a Request for Quote (RFQ).

(iii) The solicitation document incorporates the following provisions and clauses in effect through Federal Acquisition Circular FAC 2005-86-2 effective 1 February 2016.

(iv) The associated North American Industrial Classification System (NAICS) code for this procurement is 333924. This requirement will be solicited as unrestricted.

(v) A list of contract line item numbers and items, quantities, and unit of measures.

CLIN 0001 Reach Fork Lift Truck (Qty: 2 ea.)

See attached Statement of Work for specifications.

(vi) Description of requirements for the items to be acquired.

The contractor shall provide all labor, equipment, assembly, and materials necessary to deliver the reach fork lift trucks to the Bureau of Engraving and Printing’s warehouse facility in Landover, MD. Contractor shall not provide used or refurbished equipment. The equipment must be made in America.

DEPARTMENT OF THE TREASURY

BUREAU OF ENGRAVING AND PRINTING

WASHINGTON, D.C. 20228

2 BEP-RFQ-16-0749

(vii) Period of Performance: Contractor shall deliver all items within 150 days after receipt of the order.

Place of Delivery:

Bureau of Engraving and Printing, 3201 Pennsy Drive Landover, MD 20785

Shipping shall be F.O.B. Destination.

(viii) FAR 52.212-1 Instructions to Offerors—Commercial Items (OCT 2015)

Each response must clearly indicate the capability of the Offeror to meet or exceed all specifications and requirements. Responses that do not meet the specifications and requirements specified in this RFQ will be determined non-responsive and not be evaluated further.

Offerors shall submit the following:

Volume I: Technical Capabilities (limited to 5 pages): Offeror shall provide a full description to include all specifications and product number of the proposed equipment.

Note: Specifications and other literature can be considered as attachments and will not be counted as part of the five (5) page limitation for the Technical Capabilities. Failure to provide full specifications may deem the offer unacceptable.

Volume II: Price (no page limitations): Offeror shall submit a firm fixed price for two (2) Reach Fork Lift Trucks.

(ix) FAR 52.212-2 Evaluation—Commercial Items (OCT 2014)

(a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers:

Technical Capabilities: The Government will evaluate offers for technical acceptance.

Price: Price will be evaluated to determine fair and reasonableness.

(b) Options. N/A

(c) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer’s specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

3 BEP-RFQ-16-0749

Basis for Award is LOWEST PRICE TECHNICALLY ACCEPTABLE. (End of provision)

(x) FAR 52.212-3 Offeror Representation and Certifications-Commercial (NOV 2015)

Offerors shall complete and submit the attached Representation and Certifications

(xi) FAR 52.212-4, Contract Terms and Conditions--Commercial Items (MAY 2015) applies to this acquisition.

(xii) FAR 52.212-5, Contract Terms and Conditions Required to Implement Statutes Or Executive Orders-Commercial Items (FEB 2016)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

(1) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015)

(2) 52.233-3, Protest After Award (Aug 1996) (31 U.S.C. 3553).

(3) 52.233-4, Applicable Law for Breach of Contract Claim (Oct 2004)(Public Laws 108-77 and 108-78 (19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

__ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Sept 2006), with Alternate I (Oct 1995) (41 U.S.C. 4704 and 10 U.S.C. 2402).

__ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C.

3509)).

__ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (June 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

XX (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Oct 2015) (Pub. L. 109-282) (31 U.S.C. 6101 note).

__ (5) [Reserved].

__ (6) 52.204-14, Service Contract Reporting Requirements (Jan 2014) (Pub. L. 111-117, section 743 of Div. C).

__ (7) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Jan 2014) (Pub. L. 111-117, section 743 of Div. C).

__ (8) 52.209-6, Protecting the Government’s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (Oct 2015) (31 U.S.C. 6101 note).

__ (9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (Jul 2013) (41 U.S.C. 2313).

__ (10) [Reserved].

__ (11)(i) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (Nov 2011) (15 U.S.C. 657a).

4 BEP-RFQ-16-0749

__ (ii) Alternate I (Nov 2011) of 52.219-3.

__ (12)(i) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (Oct 2014) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).

__ (ii) Alternate I (Jan 2011) of 52.219-4.

__ (13) [Reserved] __ (14)(i) 52.219-6, Notice of Total Small Business Set-Aside (Nov 2011) (15 U.S.C. 644).

__ (ii) Alternate I (Nov 2011).

__ (iii) Alternate II (Nov 2011).

__ (15)(i) 52.219-7, Notice of Partial Small Business Set-Aside (June 2003) (15 U.S.C. 644).

__ (ii) Alternate I (Oct 1995) of 52.219-7.

__ (iii) Alternate II (Mar 2004) of 52.219-7.

__ (16) 52.219-8, Utilization of Small Business Concerns (Oct 2014) (15 U.S.C. 637(d)(2) and (3)).

__ (17)(i) 52.219-9, Small Business Subcontracting Plan (Oct 2014) (15 U.S.C. 637(d)(4)).

__ (ii) Alternate I (Oct 2001) of 52.219-9.

__ (iii) Alternate II (Oct 2001) of 52.219-9.

__ (iv) Alternate III (Oct 2015) of 52.219-9.

__ (18) 52.219-13, Notice of Set-Aside of Orders (Nov 2011)(15 U.S.C. 644(r)).

__ (19) 52.219-14, Limitations on Subcontracting (Nov 2011) (15 U.S.C. 637(a)(14)).

__ (20) 52.219-16, Liquidated Damages-Subcontracting Plan (Jan 1999) (15 U.S.C.

637(d)(4)(F)(i)).

__ (21) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (Nov 2011) (15 U.S.C. 657 f).

__ (22) 52.219-28, Post Award Small Business Program Rerepresentation (Jul 2013) (15 U.S.C.

632(a)(2)).

__ (23) 52.219-29, Notice of Set-Aside for Economically Disadvantaged Women-Owned Small Business (EDWOSB) Concerns (Dec 2015) (15 U.S.C. 637(m)).

__ (24) 52.219-30, Notice of Set-Aside for Women-Owned Small Business (WOSB) Concerns Eligible Under the WOSB Program (Dec 2015) (15 U.S.C. 637(m)).

XX (25) 52.222-3, Convict Labor (June 2003) (E.O. 11755).

XX (26) 52.222-19, Child Labor-Cooperation with Authorities and Remedies (Feb 2016) (E.O.

13126).

XX (27) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

XX (28) 52.222-26, Equal Opportunity (Apr 2015) (E.O. 11246).

__ (29) 52.222-35, Equal Opportunity for Veterans (Oct 2015)(38 U.S.C. 4212).

XX (30) 52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014) (29 U.S.C. 793).

__ (31) 52.222-37, Employment Reports on Veterans (Oct 2015) (38 U.S.C. 4212).

__ (32) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496).

XX (33)(i) 52.222-50, Combating Trafficking in Persons (Mar 2015) (22 U.S.C. chapter 78 and E.O. 13627).

__ (ii) Alternate I (Mar 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

__ (34) 52.222-54, Employment Eligibility Verification (Oct 2015). (Executive Order 12989).

(Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial items as prescribed in 22.1803.)

5 BEP-RFQ-16-0749

__ (35)(i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA–Designated Items (May 2008) (42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

__ (ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

__ (36)(i) 52.223-13, Acquisition of EPEAT®-Registered Imaging Equipment (Oct 2015) (E.O.s 13423 and 13514).

__ (ii) Alternate I (Oct 2015) of 52.223-13.

__ (37)(i) 52.223-14, Acquisition of EPEAT®-Registered Televisions (Jun 2014) (E.O.s 13423 and 13514).

__ (ii) Alternate I (Jun 2014) of 52.223-14.

__ (38) 52.223-15, Energy Efficiency in Energy-Consuming Products (Dec 2007) (42 U.S.C.

8259b).

__ (39)(i) 52.223-16, Acquisition of EPEAT®-Registered Personal Computer Products (Jun 2014) (E.O.s 13423 and 13514).

__ (ii) Alternate I (Jun 2014) of 52.223-16.

XX (40) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (Aug 2011) (E.O. 13513).

XX (41) 52.225-1, Buy American-Supplies (May 2014) (41 U.S.C. chapter 83).

__ (42)(i) 52.225-3, Buy American-Free Trade Agreements-Israeli Trade Act (May 2014) (41 U.S.C. chapter 83, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C.

4001 note, Pub. L. 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110- 138, 112-41, 112-42, and 112-43.

__ (ii) Alternate I (May 2014) of 52.225-3.

__ (iii) Alternate II (May 2014) of 52.225-3.

__ (iv) Alternate III (May 2014) of 52.225-3.

XX (43) 52.225-5, Trade Agreements (Feb 2016) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

XX (44) 52.225-13, Restrictions on Certain Foreign Purchases (June 2008) (E.O.’s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

__ (45) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Jul 2013) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).

__ (46) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C.

5150).

__ (47) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov 2007) (42 U.S.C. 5150).

__ (48) 52.232-29, Terms for Financing of Purchases of Commercial Items (Feb 2002) (41 U.S.C. 4505, 10 U.S.C. 2307(f)).

__ (49) 52.232-30, Installment Payments for Commercial Items (Oct 1995) (41 U.S.C. 4505, 10 U.S.C. 2307(f)).

XX (50) 52.232-33, Payment by Electronic Funds Transfer-System for Award Management (Jul 2013) (31 U.S.C. 3332).

__ (51) 52.232-34, Payment by Electronic Funds Transfer-Other than System for Award Management (Jul 2013) (31 U.S.C. 3332).

__ (52) 52.232-36, Payment by Third Party (May 2014) (31 U.S.C. 3332).

6 BEP-RFQ-16-0749

__ (53) 52.239-1, Privacy or Security Safeguards (Aug 1996) (5 U.S.C. 552a).

__ (54)(i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx. 1241(b) and 10 U.S.C. 2631).

__ (ii) Alternate I (Apr 2003) of 52.247-64.

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

__ (1) 52.222-17, Nondisplacement of Qualified Workers (May 2014)(E.O. 13495).

__ (2) 52.222-41, Service Contract Labor Standards (May 2014) (41 U.S.C. chapter 67).

__ (3) 52.222-42, Statement of Equivalent Rates for Federal Hires (May 2014) (29 U.S.C.

206 and41 U.S.C. chapter 67).

__ (4) 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (Multiple Year and Option Contracts) (May 2014) (29 U.S.C. 206 and 41 U.S.C.

chapter 67).

__ (5) 52.222-44, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (May 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

__ (6) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment-Requirements (May 2014) (41 U.S.C. chapter 67).

__ (7) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services-Requirements (May 2014) (41 U.S.C. chapter 67).

__ (8) 52.222-55, Minimum Wages Under Executive Order 13658 (Dec 2015)(E.O. 13658).

__ (9) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (May 2014) (42 U.S.C. 1792).

__ (10) 52.237-11, Accepting and Dispensing of $1 Coin (Sept 2008) (31 U.S.C. 5112(p)(1)).

(d) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-2, Audit and Records-Negotiation.

(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor’s directly pertinent records involving transactions related to this contract.

(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.

(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.

7 BEP-RFQ-16-0749

(e)(1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c), and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1) in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause-

(i) 52.203-13, Contractor Code of Business Ethics and Conduct (Apr 2010) (41 U.S.C. 3509).

(ii) 52.219-8, Utilization of Small Business Concerns (Oct 2014) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $650,000 ($1.5 million for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.

(iii) 52.222-17, Nondisplacement of Qualified Workers (May 2014) (E.O. 13495). Flow down required in accordance with paragraph (l) of FAR clause 52.222-17.

(iv) 52.222-21, Prohibition of Segregated Facilities (Apr 2015)

(v) 52.222-26, Equal Opportunity (Apr 2015) (E.O. 11246).

(vi) 52.222-35, Equal Opportunity for Veterans (Oct 2015) (38 U.S.C. 4212).

(vii) 52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014) (29 U.S.C. 793).

(viii) 52.222-37, Employment Reports on Veterans (Oct 2015) (38 U.S.C. 4212)

(ix) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40.

(x) 52.222-41, Service Contract Labor Standards (May 2014) (41 U.S.C. chapter 67).

(xi) __(A) 52.222-50, Combating Trafficking in Persons (Mar 2015) (22 U.S.C. chapter 78 and E.O 13627).

__(B) Alternate I (Mar 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O 13627).

(xii) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment-Requirements (May 2014) (41 U.S.C. chapter 67).

(xiii) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services-Requirements (May 2014) (41 U.S.C. chapter 67).

(xiv) 52.222-54, Employment Eligibility Verification (Oct 2015).

(xv) 52.222-55, Minimum Wages Under Executive Order 13658 (Dec 2015) (Executive Order 13658).

(xvi) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Jul 2013) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008;10 U.S.C. 2302 Note).

(xvii) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (May 2014) (42 U.S.C. 1792). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6.

(xviii) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx. 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph

(d) of FAR clause 52.247-64.

(2) While not required, the contractor may include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations.

(End of clause)

8 BEP-RFQ-16-0749

(xiii) Additional applicable clauses:

FAR 52.204-13, System for Award Management Maintenance (JUL 2013)

FAR 52.214-34, Submission of Offers in the English Language (APR 1991)

FAR 52.214-35 Submission of Offers in U.S. Currency (APR 1991)

FAR 52.217-8, Option to Extend Services (NOV 1999)

FAR 52.228-5, Insurance—Work on a Government Installation (JAN 1997)

FAR 52.232-39, Unenforceability of Unauthorized Obligations (JUN 2013)

FAR 52.246-16, Responsibility for Supplies (APR 1984)

FAR 52.247-34, F.O.B. Destination (NOV 1991)

FAR 52.225-2, Buy American Certificate (MAY 2014)

(a) The offeror certifies that each end product, except those listed in paragraph (b) of this provision, is a domestic end product and that for other than COTS items, the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the United States. The offeror shall list as foreign end products those end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (2) of the definition of “domestic end product.” The terms “commercially available off-the-shelf (COTS) item,” “component,” “domestic end product,” “end product,” “foreign end product,” and “United States” are defined in the clause of this solicitation entitled “Buy American-Supplies.”

(b) Foreign End Products:

Line Item No. Country of Origin

[List as necessary]

FAR 52.225-6 Trade Agreements Certificate (MAY 2014)

(a) The offeror certifies that each end product, except those listed in paragraph (b) of this provision, is a U.S.-made or designated country end product, as defined in the clause of this solicitation entitled “Trade Agreements.”

9 BEP-RFQ-16-0749

(b) The offeror shall list as other end products those supplies that are not U.S.-made or designated country end products.

Other End Products:

LINE ITEM NO. COUNTRY OF ORIGIN

[List as necessary]

DTAR 1052.201-70, Contracting Officer Representative (COR) - Appointment and Authority (APR 2015)

(a) The COR is To-Be-Completed at time of award.

(b) Performance of work under this contract must be subject to the technical direction of the COR identified above, or a representative designated in writing. The term "technical direction" includes, without limitation, direction to the contractor that directs or redirects the labor effort, shifts the work between work areas or locations, fills in details and otherwise serves to ensure that tasks outlined in the work statement are accomplished satisfactorily.

(c) Technical direction must be within the scope of the specification(s)/work statement. The COR does not have authority to issue technical direction that:

(1) constitutes a change of assignment or additional work outside the specification(s)/work statement;

(2) constitutes a change as defined in the clause entitled "Changes";

(3) in any manner causes an increase or decrease in the contract price, or the time required for contract performance;

(4) changes any of the terms, conditions, or specification(s)/work statement of the contract;

(5) interferes with the contractor's right to perform under the terms and conditions of the contract; or

(6) directs, supervises or otherwise controls the actions of the contractor's employees.

(d) Technical direction may be oral or in writing. The COR shall confirm oral direction in writing within five work days, with a copy to the contracting officer.

(e) The contractor shall proceed promptly with performance resulting from the technical direction issued by the COR. If, in the opinion of the contractor, any direction of the COR, or his/her designee, falls within the limitations in (c) above, the contractor shall immediately notify the contracting officer no later than the beginning of the next Government work day.

(f) Failure of the contractor and the contracting officer to agree that technical direction is within the scope of the contract shall be subject to the terms of the clause entitled "Disputes."

(End of clause)

DTAR 1052.210-70, Contractor Publicity (APR 2015)

The Contractor, or any entity or representative acting on behalf of the Contractor, shall not refer to the equipment or services furnished pursuant to the provisions of this contract in any news

10 BEP-RFQ-16-0749

release or commercial advertising, or in connection with any news release or commercial advertising, without first obtaining explicit written consent to do so from the Contracting Officer.

Should any reference to such equipment or services appear in any news release or commercial advertising issued by or on behalf of the Contractor without the required consent, the Government shall consider institution of all remedies available under applicable law, including 31 U.S.C. 333, and this contract. Further, any violation of this provision may be considered during the evaluation of past performance in future competitively negotiated acquisitions.

(End of clause)

DTAR 1052.228-70, Insurance Requirements (APR 2015)

In accordance with FAR clause 52.228-5, entitled “Insurance—Work on a Government Installation” [or FAR clause 52.228-7 entitled, “Insurance—Liability to Third Persons”], insurance of the following kinds and minimum amounts shall be provided and maintained during the period of performance of this contract:

(a) Worker's compensation and employer's liability. The Contractor shall, as a minimum, meet the requirements specified at FAR 28.307-2(a).

(b) General liability. The Contractor shall, at a minimum, meet the requirements specified at FAR 28.307-2(b).

(c) Automobile liability. The Contractor shall, at a minimum, meet the requirements specified at FAR 28.307-2(c).

(End of clause)

DTAR 1052.232-7003, Electronic Submission of Payment Requests (APR 2015)

Electronic Submission of Payment Requests

(a) Definitions. As used in this clause-

(1) " Payment request " means a bill, voucher, invoice, or request for contract financing payment with associated supporting documentation. The payment request must comply with the requirements identified in FAR 32.905(b), "Payment documentation and process" and the applicable Payment clause included in this contract.

(2) [Reserved]

(b) Except as provided in paragraph (c) of this clause, the Contractor shall submit payment requests electronically using the Internet Payment Platform (IPP). Information regarding IPP is available on the Internet at www.ipp.gov. Assistance with enrollment can be obtained by contacting the IPP Production Helpdesk via email ippgroup@bos.frb.org or phone (866) 973- 3131.

(c) The Contractor may submit payment requests using other than IPP only when the Contracting Officer authorizes alternate procedures in writing.

(d) If alternate payment procedures are authorized, the Contractor shall include a copy of the Contracting Officer's written authorization with each payment request.

(End of clause)

11 BEP-RFQ-16-0749

PACKAGING AND MARKING

NOTICE OF PACKING SLIP REQUIREMENTS:

The following outlines the Bureau of Engraving and Printing’s packing slip requirements to ensure efficient processing of shipments to Washington D.C.

(BEP-DCF-Landover Facility):

The Bureau of Engraving and Printing requires that all packing slips be placed in a self-adhesive pack list envelope and affixed to the outside a shipment.

The packing list will include, at minimum, the following information:

GENERAL ITEMS

Purchase Order Number – The order number the BEP assigned to this purchase.

Shipping Address – Point from which the merchandise was shipped.

Telephone Number – The telephone number to be called for inquires related to the merchandise.

Customer Information – The name and address of the party to which the merchandise is being shipped.

Total Weight of Packages If items are drop shipped from a supplier, you must ensure the proper purchase order number is written on the packing slip by your supplier.

LINE ITEMS

Manufacturer Product Identification – Item Number assigned by manufacturer/supplier BEP Product Identification (If Applicable) –Stock Item Number assigned by BEP Quantity Ordered – Quantity on the purchase order Quantity Shipped – With the packing slip Quantity Back-ordered, where applicable If the packing slip contains multiple purchase orders, each line item should include the applicable purchase order number.

NOTICE OF SHIPPING LABEL REQUIREMENTS:

Every box/skid must have at least one shipping label applied to it. The label is to include, at minimum, the following information:

Manufacturer Shipping Address BEP Purchase Order Number Customer Name & Address

Failure to adhere to the packing slip and label requirements could result in shipment rejection, processing delay, or payment delay.

(xiv) The Defense Priorities and Allocations System and assigned rating are not applicable.

12 BEP-RFQ-16-0749

(xv) Quotations shall be submitted to cecelia.brigham@bep.gov and gladys.wilks@bep.gov no later than 12:00 PM EST, Thursday, 18 February, 2016.

(xvi) Questions regarding this RFQ shall be submitted to Cecelia Brigham via email to cecelia.brigham@bep.gov and Gladys Wilks, gladys.wilks@bep.gov no later than 9:00 AM Eastern Time, Tuesday, 9 February 2016. The Offeror shall note in the email subject line the “BEP-RFQ-16-0749 and Request for Clarification.”

All inquiries must be via e-mail to the persons specified in the solicitation. All answers will be provided in writing via posting to the FBO. Phone inquiries will not be accepted.

Interested Offerors must be registered in the System for Award Management (www.sam.gov).

DISCLAIMER: The official solicitation is located on an official government web page and the Government is not liable for information furnished by any other source. Amendments, if/when issued will be posted on the FBO page. This will be the only method of distributing amendments prior to closing; therefore, it is the Offerors’ responsibility to check the website periodically for any amendments to the solicitation. Websites are occasionally inaccessible due to various reasons. The Government is not responsible for any loss of Internet connectivity or for an Offerors inability to access the documents posted on the reference web pages.