B08_Section_J_Attachment_3_Product_File_06-03-22_1.pdf

Prepared By:

Croft & Associates PC

3380 Blue Springs Road

Kennesaw, Georgia 30144

June 3, 2022

National Park Service U.S. Department of the Interior

Denver Service Center

BISC 251091

ROOF REPLACEMENT AND PAVILION STRUCTURE

FINAL CD - PRODUCT FILE

TABLE OF CONTENTS

National Park Service

BISC 251091

Corrugated Metal Roofing 2

Concrete Tile Roofing 3

Asphalt Shingle Roofing 22

Photovoltaic Collectors 30

Solar Charge Controllers 32

Solar Disconnect 34

PV Battery 36

Solar Power Distribution 38

PV Collector Roof Attachment 44

800 PAC CLAD | PAC-CLAD.COM ©2017 Petersen Aluminum Corporation

1/2” & 7/8”

CORRUGATED PANEL

PRODUCT FEATURES

` 30-year non-prorated finish warranty

` Matching screws and rivets

` Closure strips available

` Precut short lengths (5’-0” minimum)

` Panel lengths up to 38’

MATERIAL

` 43 stocked colors (24 gauge steel)

` 15 stocked colors (22 gauge steel)

` 36 stocked colors (.032 aluminum)

` 22 stocked colors (.040 aluminum)

` 29 stocked colors (.050 aluminum)

` Galvalume Plus available

FLORIDA BUILDING PRODUCT APPROVALS

Please refer to pac-clad.com or your local factory for specific product approval numbers for exposed fastener panels.

R-41

R-36

M-42

M-36

7.2

1/2” Corrugated

7/8” Corrugated

EXPOSED FASTENER

39.75”

2.667” 7/8”

37.33” COVERAGE WITH 1 LAPPED RIB FOR SIDING

34.67” COVERAGE WITH 2 LAPPED RIBS FOR ROOFING

6/8/17 - JESSICA - changed 1/2” Corrugated + 7/8 Corrugated width decimals to fractions.

7.2"

1-1/2" 36”

1-1/32"6"

3/4" 36”

1"6"

3/4" 42”

1-1/4"

12"

36”

1"13-21/32"

1-1/4" 41”

44.5”

2.667” 1/2”

42.67” COVERAGE WITH 1 LAPPED RIB FOR SIDING

40” COVERAGE WITH 2 LAPPED RIBS FOR ROOFING

R-41

R-36

M-42

M-36

7.2

1/2” Corrugated

7/8” Corrugated

EXPOSED FASTENER

39.75”

2.667” 7/8”

37.33” COVERAGE WITH 1 LAPPED RIB FOR SIDING

34.67” COVERAGE WITH 2 LAPPED RIBS FOR ROOFING

6/8/17 - JESSICA - changed 1/2” Corrugated + 7/8 Corrugated width decimals to fractions.

7.2"

1-1/2" 36”

1-1/32"6"

3/4" 36”

1"6"

3/4" 42”

1-1/4"

12"

36”

1"13-21/32"

1-1/4" 41”

44.5”

2.667” 1/2”

42.67” COVERAGE WITH 1 LAPPED RIB FOR SIDING

40” COVERAGE WITH 2 LAPPED RIBS FOR ROOFING

7/8” CORRUGATED

1/2” CORRUGATED

SPECS

39.75" Wide, 7/8” High 44.5" Wide, 1/2" High

MATERIALS

.032 aluminum .040 aluminum .050 aluminum

24 gauge steel 22 gauge steel Galvalume Plus

CORRUGATED METAL ROOFING - BOCA CHITA BARN

Boral Roofing Build something great™

CONCRETE ROOF TILE COLLECTIONS

Proudly Serving the Florida Market for over 60 Years

Okeechobee

FLORIDA

CONCRETE TILE ROOFING - BOCA CHITA PAVILION

We focus on the latest innovations in tile manufacturing.

Our process is unique, providing pre-blended tile for the best roof aesthetic. With locations in Lake Wales, Okeechobee, and Pompano Beach we continue to maintain our commitment to our Florida customers.

The Mastery of Manufacturing

1 2221

NATURAL PROTECTION

Attic temperatures measured using identical heat sources simulating the sun’s radiation comparing standard Boral concrete roof tile to a common asphalt shingle. The result is less heat in the attic and lower energy bills.

Why Tile?

Asphalt Shingle

139° attic temperature

Concrete Tile

94° attic temperature

3 4443

Material Matters. BEAUTY MATTERS

Our concrete tiles have texture and substance, creating a true multidimensional look for your roof. Their natural colorways harmonize easily with other exterior building elements.

DURABILITY MATTERS

Boral engineered tile is specifically designed for new build and reroof, helping provide Floridians protection from the elements.

VALUE MATTERS

Boral stands behind the quality of our roof tile with a Fully Transferable, Non-Prorated Limited Lifetime Warranty.

SUSTAINABILITY MATTERS

Boral roof tile is locally made and sourced in Florida since 1958.

5 666

Color Matters.

As the market leader, we strive to enhance the curb appeal of your home. We continuously develop new colors to harmonize with the shifting architectural trends in Florida. We take pride in the color quality and blending we provide.

7 887 8

Boral concrete roof tile easily harmonizes with all three dominant architectural styles in Florida.

R A

N C

H / S

P

LIT LE

V E

L P

R A

IR

IE

S

TY

LE

M

IX

E

D

LO

O K

S

M E

D

ITE

R R

A N

E A

N

TU

S C

A N

W E

S

T IN

D

IE

S

FLO

R

ID

A

O

LD

S

TY

LE

FR

E N

C H

C O

U N

TR

Y

M O

D E

R N

M

ID

-C E

N

TU

R Y

M O

D E

R N

C O

N

TE

M P

O R

A R

Y

T R A D I T I O N A L

T R A N S I T I O N A L

C O N T E M P O R A R Y

AMERICAN ADAPTATIONS OF REGIONAL HOME

STYLES FROM OTHER TIME PERIODS OR AREAS

OF THE WORLD. OFTEN MIXED REFERENCES.

PREFERS THE CLEAN LINES OF CONTEMPORARY

ARCHITECTURE, BUT DRAWS HEAVILY ON DETAILS

AND STYLES FROM TRADITIONAL ARCHITECTURE.

CHARACTERIZED BY A PREFERENCE FOR CLEAN

LINES, OPEN CONCEPTS, DECORATION,

AMPLE LIGHT SOURCES / LARGE WINDOWS,

AND LACK OF ROUND FORMS.

STYLES

9 1010

The printed colors shown in this brochure may vary from actual available tile colors. Always use actual product samples for color selection.

BERMUDA | Smooth

PREMIUM COLORS

STANDARD COLOR

NATURAL GRAY

No Antique 1GKCS5159NN

TERRA COTTA

No Antique 1GKCS6230NN

BOCA WHITE

No Antique 1GKWU8006NN

Made to Order in Okeechobee

Made to Order in Okeechobee Made to Order in Okeechobee

DESIGNER PRODUCT

BERMUDA Smooth | Terra Cotta - No Antique

37 38

Hot air is released through the ridge

Hot air rises and is vented off the roof

Shown in Saxony® Slate 900 Butterscotch

Have you considered what is underneath your roof tile?

Boral™ Cool Roof System

Boral TileSeal® UnderlaymentBoral® Roof Tile

Boral® Vented Eave Riser

Energy Savings Every Year

Reduction in heating and cooling costs†

22%

† Steep-slope Assembly Testing of Clay and Concrete Tile with and without Cool Pigmented Colors, Oak Ridge National Laboratory, 2005.

Results vary based on profile of tile installed, location, weather and other factors.

4 5

Boral® Vented RidgeBoral® Elevated Batten System®

For more information, please visit our website at BoralRoof.com@

Air enters through vented eave riser

Eave Riser

43 44

ESTATE Size Height Coverage Installed Weight / Square Pieces / Pallet Squares / Pallet Weight / Pallet Approvals Rake Barrel

16.5” x 13” 2-3/8" At 3" minimum headlap, 91 field tiles will cover approx. 100 square feet of roof area.

Approx: 828 lbs. 240 2.63 Approx: 2,560 lbs. NOA 18-0829.03

FL 7849 (NON HVHZ*)

FL 601 (HVHZ*)

1GUCS/1GUWS/1GUBS 1GRCS/1GRSS/1GRBS

GALENA Size Height Coverage Installed Weight / Square Pieces / Pallet Squares / Pallet Weight / Pallet Approvals Rake Barrel

17" x 10" 2-11/16" At 2.5" minimum headlap, 111 field tiles will cover approx. 100 square feet of roof area.

Approx: 877 lbs. 352 3.17 Approx: 3,100 lbs. NOA 14-0416.12

FL 7849 (NON HVHZ*)

FL 601 (HVHZ*)

1GUCS 1GRCS

SAXONY 900 SLATE Size Height Coverage Installed Weight / Square Pieces / Pallet Squares / Pallet Weight / Pallet Approvals 90° Rake 3-Sided Ridge 3-Sided Hip Starter

17" x 13" 1-5/32" At 3" minimum headlap, 85 field tiles will cover approx. 100 square feet of roof area.

Approx: 950 lbs. 210 2.47 Approx: 2,566 lbs. NOA 19-0207.02

FL 7849 (NON HVHZ*)

FL 601 (HVHZ*)

1R9CS/1R9BS 1R3CS/1R3BS 1FHCS/1FHBS

SAXONY 900 SPLIT SLATE Size Height Coverage Installed Weight / Square Pieces / Pallet Squares / Pallet Weight / Pallet Approvals 90° Rake 3-Sided Ridge 3-Sided Hip Starter

17" x 13" 1-5/32" At 3" minimum headlap, 85 field tiles will cover approx. 100 square feet of roof area.

Approx: 950 lbs. 210 2.47 Approx: 2,566 lbs. NOA 19-0207.02

FL 7849 (NON HVHZ*)

FL 601 (HVHZ*)

1R9CS 1R3CS 1FHCS

PLANTATION SLATE LIKE Size Height Coverage Installed Weight / Square Pieces / Pallet Squares / Pallet Weight / Pallet Approvals Rake V-Ridge

16.5" x 13" 1-5/32" At 3" minimum headlap, 91 field tiles will cover approx. 100 square feet of roof area.

Approx: 1,074 lbs. 210 2.31 Approx: 2,700 lbs. NOA 19-0207.02

FL 7849 (NON HVHZ*)

FL 601 (HVHZ*)

1GUCS 1GVCS

BERMUDA FLAT Size Height Coverage Installed Weight / Square Pieces / Pallet Squares / Pallet Weight / Pallet Approvals Rake V-Ridge Thick Butt

16" x 10" 1-3/16" At 3" minimum headlap, 123 field tiles will cover approx. 100 square feet of roof area.

Approx: 1,255 lbs. 300 2.44 Approx: 3,300 lbs. NOA 16-0112.07

FL 7849 (NON HVHZ*)

FL 601 (HVHZ*)

1GUCS 1GVCS 1GNCS

BERMUDA RUSTIC SHAKE Size Height Coverage Installed Weight / Square Pieces / Pallet Squares / Pallet Weight / Pallet Approvals Rake V-Ridge

16" x 10" 1-3/16" At 3" minimum headlap, 123 field tiles will cover approx. 100 square feet of roof area.

Approx: 1,255 lbs. 300 2.44 Approx: 3,300 lbs. NOA 16-0112.07

FL 7849 (NON HVHZ*)

FL 601 (HVHZ*)

1GUCS 1GVCS

Specifications & Finishing Touches

45 4646

The printed colors shown on this sheet may vary from actual colors. Please contact your local sales office for further assistance.

ESTATE

Antigua Tan

Arizona Clay Terra Cotta

Brown Sugar Brown

Canyon Clay Terra Cotta

Carmel Terra Cotta

Casa Grande Blend Terra Cotta

Coconut Tan

Cedar Tan Tan

Copper Red

Coquina Tan

Delcrest Tan Tan

Desert Tan Tan

Espresso Blend Brown

Frosty Gray Gray

Gold Dust Terra Cotta

Light Brown Brown

Malibu Sand Tan

Natural Gray Gray

Pinto Blend Tan

Salmon Terra Cotta

Slate Gray

Spanish Clay Red

Spanish Red Red

Sterling White

Tan Tan

Terra Clay Terra Cotta

Terra Cotta Terra Cotta

Tequila Sunset Terra Cotta

Ultra White White

ESTATE BLENDS

Autumn Blend Tan

Bayside Blend Terra Cotta

Caladesi Blend Terra Cotta

Candle Flame Blend Red

Cobblestone Blend Tan

Destin Blend Tan

Driftwood Blend Terra Cotta

Harvest Blend Terra Cotta

Largo Blend Tan

Monterey Blend Terra Cotta

Navajo Sand Blend Red

Osceola Blend Terra Cotta Sienna Blend Tan

GALENA

Canyon Clay Terra Cotta

Carmel Terra Cotta

Cedar Terra Cotta

Desert Tan Tan

Nevada Clay Terra Cotta

Spanish Clay Red

Spanish Red Red

Tan Tan

Terra Cotta Terra Cotta

SAXONY® 900 SLATE

Brown Sugar Brown

Butterscotch Tan

Cedar Tan Tan

Chestnut Burnt Brown

Dark Charcoal Blend Black

Desert Tan Tan

Espresso Brown

Espresso Blend Brown

Latte Tan

Midnight Black Black

Natural Gray Gray

Slate Gray

Smoke Gray

Sterling White

Stone Mountain Blend Black

Ultra White White

SAXONY® 900 SLATE BLENDS

Bungalow Blend Brown

Cloudy Bay Blend Gray

Stone Creek Blend Tan

Suwanee Blend Brown

SAXONY® 900 SPLIT SLATE

& PLANTATION SLATE LIKE

Brown Sugar Brown

Canyon Clay Terra Cotta

Coconut Tan

Cedar Tan Tan

Cinnamon Brown Brown

Lignite Gray

Natural Gray Gray

Sierra Brown Brown Smoke Gray Slate Gray Taupe Gray

Terra CottaTan Brown BlackRed

White Gray

SAXONY® 900 SPLIT SLATE

& PLANTATION SLATE LIKE BLENDS

Cheyenne Rock Blend Gray Clam Shell Blend Brown Oyster Bay Blend Gray Pablo Creek Blend Gray Rockport Gray Blend Gray

BERMUDA SMOOTH

Boca White White Natural Gray Gray Terra Cotta Terra Cotta

BERMUDA BROOM SWEPT

Cedar Tan Tan Indian Red Red Natural Gray Gray Sierra Brown Brown Slate Gray

BERMUDA RUSTIC SHAKE

Lignite Gray Moss Tan Sandstone Tan Slate Gray Smoke Gray

BERMUDA RUSTIC SHAKE BLENDS

Weathered Ash Blend Gray

Code Approval: Complies with all building codes including but not limited to ICC ESR-1647. Some approvals are regional and only apply to locally produced products; please contact Boral Roofing before transporting product across state lines. Specifically, products used in the Miami Dade County region of Florida require PREMIUM testing and recognition. All tiles are Class A fire rated.

Disclaimer: The printed colors shown in this brochure may vary from actual available tile colors. Before making a final selection, be sure to review actual tile samples and roof installations. Please contact your local sales office for further assistance. Inadvertent errors in this publication are subject to change without notice. No performance guarantee is offered or implied beyond that expressly indicated.

Efflorescence is a temporary surface condition which is common to all concrete products. The process is caused by the chemical nature of cement. This reaction can appear as an overall chalky white bloom (a softening of color) or in more concentrated patches. It is difficult to predict how long the effects of efflorescence will last. It depends on the type and amount of deposit as well as local weather conditions. The action of carbon dioxide and rainwater will gradually remove the deposit, in most cases, leaving the original color of the roof intact without further efflorescence occurring. It is superficial and in no way affects the quality or functional properties of the tile.

Installation: According to the Tile Roofing Institute loading guidelines, “To achieve a pleasant, random blend of color for your job, care should be taken upon loading to mix the tiles.” (Source: 2015 Clay and Concrete Roof Tile Installation Manual). Please consult the Tile Roofing Institute (TRI) Installation guides for application recommendations.

Visualize Picture your new roof with Boral Roofing’s Inspiration house photo gallery on our website.

Order A Sample Deciding on the perfect roof can be overwhelming. So, instead of wondering what color or style will work, order a sample and take the guesswork out of your decision. It’s just another way Boral Roofing makes it easy to buy with confidence.

Architectural Tools Our complete suite of architectural tools, including Arcat 3-Part Specs and CAD/BIM drawings, are available for download directly from our website.

Online Ordering Manage your orders through My Boral, a simple online tool to track product orders in real time, all from the convenience of your computer, tablet or smartphone. Sign-up for e-mail alerts to notify you of your order status.

Limited Lifetime Warranty As a brand you can trust, Boral Roofing offers one of the most comprehensive, fully transferable roofing warranties available on the market today.

Follow Us On Social Media See what everyone loves about Boral Roofing and get inspired on: Facebook, Twitter, LinkedIn, YouTube, Houzz, Pinterest, Instagram.

BoralRoof.com - Imagine the Possibilities

Cover: Saxony 900 Slate Dark Charcoal Blend

Suggested Eave Metal Colors

47 484848

SAXONY 900 Slate | Slate - Black Antique 5049

2020 B oral R oofing LLC

B R

121 - 3/20

Sales Offices Phoenix, ARIZONA

Corona, CALIFORNIA

Lathrop, CALIFORNIA

Stockton, CALIFORNIA

Rialto, CALIFORNIA

Denver, COLORADO

Pompano Beach, FLORIDA

Corporate Office Boral Roofing

200 Mansell Court East, Suite 310

Roswell, GA 30076

Western Office Boral Roofing

7575 Irvine Center Drive, Ste. #100

Irvine, CA 92618

Customer Service 863.824.1289

Download a QR Code reader app for your smart phone, then take a photo to visit our website BoralRoof.com

Lake Wales, FLORIDA

Okeechobee, FLORIDA

Atlanta, GEORGIA

Kapolei, HAWAII

Henderson, NEVADA

Fort Worth, TEXAS

Katy, TEXAS

Website

ABOUT BORAL ROOFING

Boral Roofing LLC is a subsidiary of Boral USA and is the country’s largest premium provider of complete roofing and re-roofing solutions for architects as well as commercial and residential builders. Boral Roofing operates manufacturing plants throughout the U.S.

ABOUT BORAL NORTH AMERICA

Headquartered in Roswell, Georgia, Boral North America is a leader in key construction materials and building products markets with operations across the USA, Canada, and Mexico. In 2017 Boral acquired Headwaters Incorporated, expanding Boral’s product offering and manufacturing and distribution footprint across North America. In construction materials, Boral has a national footprint and industry-leading position in the processing and distribution of fly ash – a by-product of coal combustion.

In building products, Boral manufactures and supplies cladding, roof tiles, windows, and other light building products for residential and commercial markets nationally. Boral’s manufactured stone veneer includes leading brands Cultured Stone® by Boral®, Boral Versetta Stone®, Eldorado Stone®, Dutch Quality Stone®, and StoneCraft Industries®. Boral’s light building products portfolio includes Boral TruExterior® Siding & Trim – a pioneer of the innovative poly-ash category of exterior building products – as well as shutters, gable vents, mounting blocks, and tool systems. In roofing, Boral is a leading manufacturer of clay and concrete roof tiles, and also produces composite polymer and stone-coated metal roof tiles.

Boral also has a 50% share of the Meridian Brick joint venture, a leading clay and concrete brick manufacturer which was formed with Forterra Brick in 2016.

BoralAmerica.com

FORT MYERS:

16240 S Tamiami Trail Fort Myers, FL 33908 T: 863.467.3470

Visit our Design Centers:

POMPANO:

2125 NW 22nd Street Pompano Beach, FL 33069 T: 954.973.2128

ORLANDO:

2250 Lee Road Suite 80 Winter Park, FL 32789 T: 407.960.7536

TAMPA:

5411 Beaumont Center Blvd Suite 795 Tampa, FL 33634 T: 813.285.8211 www.BoralRoof.com SKU: 1GKWU8006NN Bermuda Smooth - Boca White

NOA No. 21-0323.04 Expiration Date: 06/07/26

Approval Date: 05/20/21

MIAMI-DADE COUNTY

PRODUCT CONTROL SECTION

11805 SW 26 Street, Room 208 DEPARTMENT OF REGULATORY AND ECONOMIC RESOURCES (RER) Miami, Florida 33175-2474

BOARD AND CODE ADMINISTRATION DIVISION T (786) 315-2590 F (786) 315-2599

NOTICE OF ACCEPTANCE (NOA) www.miamidade.gov/economy

Boral Roofing, LLC 7575 Irvine Center Drive Suite 100 Irvine, CA 92618

SCOPE:

This NOA is being issued under the applicable rules and regulations governing the use of construction materials. The documentation submitted has been reviewed and accepted by Miami-Dade County RER -Product Control Section to be used in Miami-Dade County and other areas where allowed by the Authority Having Jurisdiction (AHJ).

This NOA shall not be valid after the expiration date stated below. The Miami-Dade County Product Control Section (in Miami-Dade County) and/or the AHJ (in areas other than Miami-Dade County) reserve the right to have this product or material tested for quality assurance purposes. If this product or material fails to perform in the accepted manner, the manufacturer will incur the expense of such testing and the AHJ may immediately revoke, modify, or suspend the use of such product or material within their jurisdiction. RER reserves the right to revoke this acceptance, if it is determined by Miami-Dade County Product Control Section that this product or material fails to meet the requirements of the applicable building code.

This product is approved as described herein, and has been designed to comply with the Florida Building Code including the High Velocity Hurricane Zone of the Florida Building Code.

DESCRIPTION: Bermuda Concrete Flat Roof Tile

LABELING: Each unit shall bear a permanent label with the manufacturer's name or logo, city, state and following statement: "Miami-Dade County Product Control Approved", unless otherwise noted herein.

RENEWAL of this NOA shall be considered after a renewal application has been filed and there has been no change in the applicable building code negatively affecting the performance of this product.

TERMINATION of this NOA will occur after the expiration date or if there has been a revision or change in the materials, use, and/or manufacture of the product or process. Misuse of this NOA as an endorsement of any product, for sales, advertising or any other purposes shall automatically terminate this NOA. Failure to comply with any section of this NOA shall be cause for termination and removal of NOA.

ADVERTISEMENT: The NOA number preceded by the words Miami-Dade County, Florida, and followed by the expiration date may be displayed in advertising literature. If any portion of the NOA is displayed, then it shall be done in its entirety.

INSPECTION: A copy of this entire NOA shall be provided to the user by the manufacturer or its distributors and shall be available for inspection at the job site at the request of the Building Official.

This NOA renews NOA No. 19-1021.08 and consists of pages 1 through 6.

The submitted documentation was reviewed by Alex Tigera.

ROOFING ASSEMBLY APPROVAL

Category: Roofing Sub Category: Roofing Tiles Material: Concrete

1. SCOPE

This approves a roofing system using Bermuda Flat Concrete Roof Tile, as manufactured Boral Roofing, LLC in Okeechobee, FL as described in Section 2 of this Notice of Acceptance, designed to comply with the Florida Building Code for High Velocity Hurricane Zone. For use in locations where the pressure requirements, as determined by applicable Building Code, do not exceed the design pressure values obtain by calculations in compliance with RAS 127 using the values listed in section 4 herein. The attachment calculations shall be prepared as a moment based system.

2. PRODUCT DESCRIPTION

Manufactured by Applicant

Dimensions

Test Specifications

Product Description

Bermuda Flat Concrete Tile Length = 16" Width = 10"

TAS 112

Type 3a Class III

Flat profile, interlocking, high pressure extruded concrete roof tile equipped with two nail holes.

For mechanical, mortar or adhesive set applications.

Trim Pieces l = varies w = varies varying thickness

TAS 112 Accessory trim, concrete roof pieces for use at hips, rakes, ridges and valley terminations.

Manufactured for each tile profile.

2.1 MANUFACTURING LOCATION

1. Okeechobee, FL

2.2 EVIDENCE SUBMITTED

Test Agency Test Identifier

Test Name/Report Date Redland Technologies 7161-03

Appendix III Static Uplift Testing

PA 102 & PA 102(A)

Dec. 1991

The Center for Applied Engineering, Inc.

94-084 Static Uplift Testing PA 101 (Mortar Set)

May 1994

The Center for Applied Engineering, Inc.

94-060A Static Uplift Testing PA 101 (Adhesive Set)

March, 1994

The Center for Applied Engineering, Inc.

25-7094-2 Static Uplift Testing PA 102 (4" Headlap, Nails, Direct Deck, New

Construction)

Oct. 1994

The Center for Applied Engineering, Inc.

25-7094-8 Static Uplift Testing PA 102 (4" Headlap, Nails, Battens)

Oct. 1994

The Center for Applied Engineering, Inc.

25-7094-5 Static Uplift Testing PA 102 (4" Headlap, Nails, Direct Deck, Recover/Reroof)

Oct. 1994

The Center for Applied Engineering, Inc.

25-7183-6 Static Uplift Testing PA 102 (2 Quik-Drive Screws, Direct Deck)

Feb. 1995

2.2 EVIDENCE SUBMITTED

Test Agency Test Identifier

Test Name/Report Date The Center for Applied Engineering, Inc.

25-7183-5 Static Uplift Testing

PA 102

(2 Quik-Drive Screws, Battens)

Feb. 1995

The Center for Applied Engineering, Inc.

25-7214-1 Static Uplift Testing

PA 102

(1 Quik-Drive Screw, Direct Deck)

March, 1995

The Center for Applied Engineering, Inc.

25-7214-5 Static Uplift Testing

PA 102

(1 Quik-Drive Screw, Battens)

March, 1995

Redland Technologies 7161-03 Appendix II

Wind Tunnel Testing PA 108 (Nail-On)

Dec. 1991

Redland Technologies Letter Dated Aug. 1, Wind Tunnel Testing PA 108 (Nail-On)

Aug. 1994

Redland Technologies P0631-01 Wind Tunnel Testing PA 108 (Mortar Set)

July 1994

Redland Technologies P0402 Withdrawal Resistance Testing of screw

vs. smooth shank nails

Sept. 1993

The Center for Applied Engineering, Inc.

Project No. 307025 Test #MDC-77

Wind Driven Rain

PA 100

Oct. 1994

Atlanta Testing & Engineering, Inc. R1.894 R2.894 R3.894

Physical Properties

PA 112

Aug. 1994

Professional Service Industries, Inc. 395-40011-1 Physical Properties

PA 112

Feb 2004

Celotex Corporation Testing Service 520109-1 520111-4

Static Uplift Testing

PA 101

Dec. 1998

Celotex Corporation Testing Service 520191-1

Static Uplift Testing

PA 101

March 1999

Walker Engineering, Inc. Calculations Aerodynamic Multiplier March 2004 Walker Engineering, Inc. Evaluation Calculations 25-7094 Feb 1996 Walker Engineering, Inc. Evaluation Calculations 25-7496 April 1996 Walker Engineering, Inc. Evaluation Calculations 25-7584

25-7804b-8 25-7804-4 & 5

25-7848-6

December

Walker Engineering, Inc. Evaluation Calculations 25-7183 March 1995 Walker Engineering, Inc. Evaluation Calculations Restoring Moment, Mg March 2004 Walker Engineering, Inc. Calculations Two Patty Adhesive Set System April 1999 Nutting Engineers 13343.1 TAS 112 05/06/08 American Test Lab of South Florida RT1210.02-15 TAS 112 12/17/15

RT0201.05-21 TAS 112 02/12/21

3. LIMITATIONS:

3.1 Fire classification is not part of this acceptance.

3.2 For mortar or adhesive set tile applications, a static field uplift test in accordance with TAS 106 may be required, refer to applicable building code.

3.3 Applicant shall retain the services of a Miami-Dade County Certified Laboratory to perform quarterly test in accordance with TAS 112, appendix ‘A’. Such testing shall be submitted to the Miami-Dade Product Control Section for review.

3.4 Minimum underlayment shall be in compliance with the applicable Roofing Applications Standards listed section 4.1 herein.

3.5 Minimum 4/12 slope for mechanically installed tiles.

3.6 30/90 hot mopped underlayment applications may be installed perpendicular to the roof slope unless stated otherwise by the underlayment material manufacturers published literature.

3.7 This acceptance is for wood deck applications. Minimum deck requirements shall be in compliance with applicable building code.

4. INSTALLATION

4.1 Boral Bermuda ‘Flat’ Concrete Roof Tile and its components shall be installed in strict compliance with Miami Dade County Roofing Application Standard RAS 118, RAS 119, and RAS 120.

4.2 Data For Attachment Calculations.

Table 1: Average Weight (W) and Dimensions (l x w )

Tile Profile

Weight-W (lbf) Length-l (ft.) Width-w (ft.)

Bermuda Flat Tile 9.7 1.33 .833

Table 2: Aerodynamic Multipliers - (ft3)

Tile Profile

(ft3) Batten Application

(ft3) Direct Deck Application

Bermuda Flat Tile 0.189 0.205

Table 3: Restoring Moments due to Gravity - Mg (ft.-lbf)

3":12" 4":12" 5":12" 6":12" Greater than 7":12"

Bermuda Flat Tile Battens Direct Deck

Battens Direct Deck

Battens Direct Deck

Battens Direct Deck

Battens Direct Deck

N/A 6.97 6.43 6.86 6.29 6.71 6.14 6.54 5.97 6.35

Table 4: Attachment Resistance Expressed as a Moment - Mf (ft-lbf) for Nail-On Systems

Fastener Type Direct Deck (min 15/32” plywood)

Direct Deck (min. 19/32” plywood)

Battens

Bermuda Flat

2-10d Ring Shank Nails 30.9 38.1 17.2 1-10d Smooth or Screw

Shank Nail

7.3 9.8 4.9

2-10d Smooth or Screw Shank Nails

14.0 18.8 7.4

1 #8 Screw 30.8 30.8 18.2 2 #8 Screw 51.7 51.7 24.4

1-10d Smooth or Screw Shank Nail (Field Clip)

24.3 24.3 24.2

1-10d Smooth or Screw Shank Nail (Eave Clip)

19.0 19.0 22.1

2-10d Smooth or Screw Shank Nails (Field Clip)

35.5 35.5 34.8

2-10d Smooth or Screw Shank Nails (Eave Clip)

31.9 31.9 32.2

2-10d Ring Shank Nails1 50.3 65.5 48.3

1 Installation with a 4" tile headlap and fasterners are located a min. of 2½“ from head of tile.

Table 5: Attachment Resistance Expressed as a Moment Mf (ft.-lbf) for Two Patty Adhesive Set Systems

Tile Application Minimum Attachment Resistance

Bermuda Flat Tile Adhesive 31.33

2 See manufactures component approval for installation requirements.

3 Flexible Products Company TileBond Average weight per patty 13.9 grams.

3M™ 2-Component Foam Roof Tile Adhesive AH-160. Average weight per patty 8 grams.

Table 6: Attachment Resistance Expressed as a Moment - Mf (ft.-lbf) for Single Patty Adhesive Set Systems

Tile Application Minimum Attachment Resistance

Bermuda Flat

3M™ 2-Component Foam Roof Tile Adhesive AH-160 118.94

3M™ 2-Component Foam Roof Tile Adhesive AH-160 40.45

4 Large paddy placement of 45 grams of 3M™ 2-Component Foam Roof Tile Adhesive AH-160 5 Medium paddy placement of 24 grams of 3M™ 2-Component Foam Roof Tile Adhesive AH-160

5. LABELING

All tiles shall bear the imprint or identifiable marking of the manufacturer's name or logo as seen below or following statement: "Miami-Dade County Product Control Approved".

Bermuda Flat Concrete Tile

LABEL (LOCATED ON UNDERSIDE OF TILE)

BUILDING PERMIT REQUIREMENTS:

As required by the Building Official or the applicable Building Code in order to properly evaluate the installation of this system. This Notice of Acceptance on its own cannot be used to obtain a building permit.

PROFILE DRAWING

Bermuda "FLAT" CONCRETE ROOF TILE

END OF THIS ACCEPTANCE

FIELD TILE

THICK BUTT TILE

Desert Tan†

SUPREME®

Shingles

SEAL. BREATHE.DEFEND.

TOTAL PROTECTION. TOTAL CONFIDENCE.®

ASPHALT SHINGLE ROOFING - BOCA CHITA CHAPEL

Product Attributes Warranty Length* 25-Year Limited

Wind Resistance Limited Warranty*

60 MPH

Algae Resistance Limited Warranty* 10 Years

TRU PROtection® Non-Prorated Limited Warranty* Period 5 Years

Product Specifications Size 12" x 36"

Application Exposure 5"

Shingles per Bundle Not less than 26

Average Shingle Count per 3 Bundles 80

Average Coverage per 3 Bundles 100 sq. ft.

Applicable Standards and Codes

ASTM D228

ASTM D3018 (Type 1)

ASTM D3161 (Class F Wind Resistance)

ASTM D3462

ASTM D7158 (Class H Wind Resistance)

ASTM E108/UL 790 (Class A Fire Resistance)

Florida Product Approval‡

ICC-ES AC438#

Miami-Dade County Product Approval††

PRI ER 1378E01

Shasta White color meets ENERGY STAR® requirements for initial solar reflectance of 0.25 and 3-year aged solar reflectance of 0.15;

2013 California Building Energy Efficiency Standards; Title 24, Part 6 requirements; Rated by the Cool Roof Rating Council (CRRC).

Supreme® Shingles Supreme® three-tab shingles—a smart choice when you need to balance curb appeal, weather resistance and value. Supreme shingles come with a 25-Year Limited Warranty*, 60-MPH Wind Resistance Limited Warranty*, and Class A UL Fire Resistance— the industry’s highest. StreakGuard™ Protection with a 10-year Algae Resistance Limited Warranty is also available on a regional basis. Visit owenscorning.com/roofing to learn more.

ENERGY STAR® is for roofs too Similar to the energy-efficient appliances in your home, roofing products can help provide energy-saving qualities. Owens Corning® Supreme roofing shingles in Shasta White can help reduce your heating and cooling bills when installed properly. These shingles reflect solar energy, helping to decrease the amount of heat transferred to a home’s interior—and the amount of air conditioning needed to keep it comfortable. Actual savings will vary based on geographic location and individual building characteristics. Call 1-800-GET-PINK® or 1-888-STAR-YES for more information.

COLORS AVAILABLE IN ALL AREAS

Shasta White†

Aspen Gray† Autumn Brown†

Brownwood† Desert Tan†

Driftwood†

Onyx Black†

Estate Gray†

ADDITIONAL REGIONAL COLORS (See chart and map for availability)

* See actual warranty for complete details, limitations and requirements.

† Actual colors and granule blends may vary from the photo. We suggest that you view actual product on the roof to get a better idea of the finish color. Color availability subject to change without notice. Ask your professional roofing contractor for samples of colors available in your area.

†† Applies for all areas that recognize a Miami-Dade Notice of Acceptance (NOA).

‡ Applicable only in Service Area 3 (see map).

# International Code Council Evaluation Services Acceptance Criteria for Alternative Asphalt Shingles.

ENERGY STAR and the ENERGY STAR mark are registered trademarks of the U.S. Environmental Protection Agency.

^ Excludes non-Owens Corning® roofing products such as flashing, fasteners, pipe boots and wood decking.

Disclaimer of Liability Technical information contained herein is furnished without charge or obligation and is given and accepted at recipient’s sole risk. Because conditions of use may vary and are beyond our control, Owens Corning makes no representation about, and is not responsible or liable for the accuracy or reliability of data associated with particular uses of any product described herein.

Weathered Wood†Teak†

Antique Silver†

Williamsburg Gray†

Forest Green† Spanish Red†

Chateau Green†

REGIONAL COLOR AVAILABILITY MAP

1 2 3 4 5 6 7 8 9 10 11 12

Amber†

Antique Silver†

Beachwood Sand†

Chateau Green†

Forest Green†

Spanish Red†

Teak†

Weathered Wood†

Williamsburg Gray†

Beachwood Sand†

Amber†

OWENS CORNING ROOFING AND ASPHALT, LLC

ONE OWENS CORNING PARKWAY

TOLEDO, OHIO, USA 43659

1-800-GET-PINK®

www.owenscorning.com/roofing

Pub. No. 10013324-I. Printed in U.S.A. October 2019.

THE PINK PANTHER ™ & © 1964–2019 Metro-Goldwyn-Mayer Studios Inc.

All Rights Reserved. The color PINK is a registered trademark of Owens Corning.

© 2019 Owens Corning. All Rights Reserved.

(Atlanta, Brookville, Denver, Irving East, Irving West, Jacksonville, Kearny, Medina, Memphis, Minneapolis, Savannah, Summit)

TOTAL PROTECTION SIMPLIFIED™

Total Protection Roofing System®^

Owens Corning® Total Protection Roofing System®^ integrates engineered Owens Corning® components that work together to address these three primary performance areas, critical to a high-performance roof, while also making it easy to understand the importance of each. With Owens Corning, it’s easy to confidently deliver total protection, beauty and peace of mind.

STARTER SHINGLES

LAMINATE SHINGLES

HIP & RIDGE SHINGLES

INTAKE VENTS

EXHAUST VENTS

SELF-ADHERED ICE

& WATER BARRIER

SYNTHETIC UNDERLAYMENT

PINK® FIBERGLAS™

BLOWN-IN

ATTIC INSULATION

NOA No.: 18-0215.01

Expiration Date: 03/20/23

Approval Date: 03/15/18

MIAMI-DADE COUNTY

PRODUCT CONTROL SECTION

DEPARTMENT OF REGULATORY AND ECONOMIC RESOURCES (RER) 11805 SW 26 Street, Room 208

BOARD AND CODE ADMINISTRATION DIVISION Miami, Florida 33175-2474

T (786) 315-2590 F (786) 315-2599

NOTICE OF ACCEPTANCE (NOA) www.miamidade.gov/economy

Owens Corning Roofing and Asphalt, LLC

1 Owens Corning Parkway

Toledo, OH 43659

SCOPE:

This NOA is being issued under the applicable rules and regulations governing the use of construction materials. The documentation submitted has been reviewed and accepted by Miami-Dade County RER - Product Control Section to be used in Miami Dade County and other areas where allowed by the Authority Having Jurisdiction (AHJ).

This NOA shall not be valid after the expiration date stated below. The Miami-Dade County Product Control Section

(In Miami Dade County) and/or the AHJ (in areas other than Miami Dade County) reserve the right to have this product or material tested for quality assurance purposes. If this product or material fails to perform in the accepted manner, the manufacturer will incur the expense of such testing and the AHJ may immediately revoke, modify, or suspend the use of such product or material within their jurisdiction. RER reserves the right to revoke this acceptance, if it is determined by Miami-Dade County Product Control Section that this product or material fails to meet the requirements of the applicable building code.

This product is approved as described herein, and has been designed to comply with the Florida Building Code including the High Velocity Hurricane Zone of the Florida Building Code.

DESCRIPTION: Supreme AR 3 Tab Shingles

LABELING: Each unit shall bear a permanent label with the manufacturer's name or logo, city, state and following statement: "Miami-Dade County Product Control Approved", unless otherwise noted herein.

RENEWAL of this NOA shall be considered after a renewal application has been filed and there has been no change in the applicable building code negatively affecting the performance of this product.

TERMINATION of this NOA will occur after the expiration date or if there has been a revision or change in the materials, use, and/or manufacture of the product or process. Misuse of this NOA as an endorsement of any product, for sales, advertising or any other purposes shall automatically terminate this NOA. Failure to comply with any section of this NOA shall be cause for termination and removal of NOA.

ADVERTISEMENT: The NOA number preceded by the words Miami-Dade County, Florida, and followed by the expiration date may be displayed in advertising literature. If any portion of the NOA is displayed, then it shall be done in its entirety.

INSPECTION: A copy of this entire NOA shall be provided to the user by the manufacturer or its distributors and shall be available for inspection at the job site at the request of the Building Official.

This renews and revises NOA#12-1204.03 and consists of pages 1 through 4.

The submitted documentation was reviewed by Freddy Semino http://www.miamidade.gov/economy

ROOFING ASSEMBLY APPROVAL

Category: Roofing

Sub-Category: Asphalt Shingles

Materials 3-Tab

Deck Type: Wood

SCOPE

This approves Owens Corning Supreme AR as manufactured by Owens Corning described in Section 2 of this Notice of Acceptance.

PRODUCT DESCRIPTION

Product Dimensions Test

Specifications

Product Description

Supreme AR 12” x 36” TAS 110 A heavy weight, fiberglass reinforced asphalt shingle.

MANUFACTURING LOCATION

1. Atlanta, GA.

2. Irving, TX.

3. Medina, OH.

EVIDENCE SUBMITTED

Test Agency

Test Identifier Test Name/Report Date

Underwriters Laboratories, Inc. R2453 Reference

ASTM D 3462

07/07/15

PRI Asphalt Technologies, Inc. OCF-415-02-01

OCF-417-02-01

OCF-419-02-01

OCF-415-02-02

OCF-417-02-02

OCF-419-02-02

TAS 100

TAS 107/ASTM D3161

01/18/18

01/24/18

01/18/18

01/24/18

LIMITATIONS

1. Fire classification is not part of this acceptance; refer to a current Approved Roofing Materials Directory for fire ratings of this product.

2. Shall not be installed on roof mean heights in excess of 33 ft.

3. All products listed herein shall have a quality assurance audit in accordance with the Florida Building Code and Rule 61G20-3 of the Florida Administrative Code.

INSTALLATION

1. Shingles shall be installed in compliance with Roofing Application Standard RAS 115.

2. Flashing shall be in accordance with Roofing Application Standard RAS 115

3. The manufacturer shall provide clearly written application instructions.

4. Exposure and course layout shall be in compliance with Detail 'A', attached.

5. Nailing shall be in compliance with Detail 'B', attached.

LABELING

1. Shingles shall be labeled with the Miami-Dade Seal as seen below, or the wording “Miami-Dade County

Product Control Approved”.

BUILDING PERMIT REQUIREMENTS

1. Application for building permit shall be accompanied by copies of the following:

1.1 This Notice of Acceptance.

1.2 Any other documents required by the Building Official or the applicable code in order to properly evaluate the installation of this system.

DETAIL A

6"

5"

6"

DETAIL B

8"

36"

8"

6"

8"

12"

8"

2" 10" 1"

EXPOSURE

ADHESIVE STRIPENAILS

5"

END OF THIS ACCEPTANCE

PHOTOVOLTAIC COLLECTORS - BOCA CHITA BARN

032822

© 2022 LG Electronics USA, Inc. All rights reserved.

PHOTOVOLTAIC COLLECTORS - BOCA CHITA BARN

The MPPT 80 and MPPT 100 600 Vdc Solar Charge Controllers optimize the power from PV arrays for DC coupled solar and storage installations, with easy, flexible installation.

Optimum System Performance

• High power, 600 Vdc MPPT PV optimization and battery charge control

• Flexibility for oversized PV array power ratings up to 8.5 kW with the MPPT 100 or 6.8 kW with the MPPT 80

• High efficiency from PV to battery to grid, ideal for the self-consumption of solar energy

• Black start batteries from solar, providing maximum energy resilience for longer duration grid outages

• Harvest more energy with shade tolerant fast sweep MPPT algorithm

Flexible

• Flexible string sizing with a wide MPPT and PV operating voltage range

• Compatible with XW Pro and SW series hybrid inverters for a complete grid tied or off grid solar and storage solution

Easy to Install

• 2 string installations and smaller wire sizing with 600 Vdc PV arrays, allowing faster, lower cost installations

• No need for a combiner box with DC breakers or fuses

• Easy to install PV disconnect and NEC 2017 compliant rapid shutdown transmitter with the MPPT Disconnect RS accessory, UL1741 PVRSS certified solar.schneider-electric.com

MPPT PV Optimization 600 Vdc Solar Charge Controllers 6 kW MPPT 100 600 (Part Number 865-1034)

4.8 kW MPPT 80 600 (Part Number 865-1032)

Compatible with Insight

Energy Management

• Setup and configuration

• Remote monitoring & control with advanced data security

• Web and mobile app

• Multi-site management for installers

Insight Energy Management

PV SYSTEM - BOCA CHITA BARN

Technical Specifications

© 2021 Schneider Electric. All Rights Reserved. All trademarks are owned by Schneider Electric Industries SAS or its affiliated companies. All information is preliminary and will need to be confirmed at the time of order.

DS20210129_MPPT 80 600 | MPPT 100 600.indd

MPPT 80 600 | MPPT 100 600 | 2

MPPT 80 600 MPPT 100 600

Electrical Specifications

Max PV array open circuit voltage 600 V 600 V

MPPT voltage range 195 to 510 VDC 195 to 510 VDC

PV array operating voltage 195 to 550 V 195 to 550 V

Max. array short circuit current at STC 28 A 35 A

Max. input operating current 23 A 29 A

Max. output power 4800 W (nominal 48 V systems) 6000 W (nominal 48 V systems)

Nominal battery voltage 24 and 48 VDC 24 and 48 VDC

Battery voltage operating range 16 to 67 VDC 16 to 67 VDC

Max. output charge current 80 A 100 A

Charger regulation method Three-stage (bulk, absorption, float) plus manual equalization Two-stage (bulk, absorption) plus manual equalization

Supported battery types Flooded, GEL, AGM, Lithium-ion, Custom

Efficiency

Max. power conversion efficiency 95% (nominal 48 V), 92% (nominal 24 V)

General Specifications

Power consumption, night time < 1 W

Battery temperature sensor Included

Auxiliary output Dry contact switching up to 60 VDC, 30 VAC, 8 A

Enclosure material Enclosure material: Indoor, ventilated, aluminium sheet metal chassis

Knockout dimensions

44.0 mm, 35.0 mm , 28.2 mm, and 22.2 mm knockouts for 1-1/4, 1, ¾, and ½ inch trade size fittings

IP degree of protection IP20

Product weight 13.5 kg (29.8 lb)

Shipping weight 20.4 kg (45 lb)

Product dimensions (H x W x D) 76.0 × 22.0 × 22.0 cm (30.0 × 8.6 × 8.6 in)

Shipping dimensions (H x W x D) 113.39 × 28.68 × 31.90 cm (44.64 × 11.29 × 12.56 in)

Ambient air temperature for operation -20 °C to 65 °C (-4 °F to 149 °F), power derating above 40 °C

Storage temperature range -40 °C to 85 °C (-40 °F to 185 °F)

Operating altitude Sea level to 2000 m (6562 ft)

System network and remote monitoring Available with Insight Energy Management

Warranty Please refer to our website, SEsolar.com for the latest version of the warranty state-ment.

Part number 865-1032 865-1034

Regulatory Approvals

Safety CSA certified (UL1741, CSA 107.1) and CE marked for the Low-voltage Directive

(EN50178)

EMC

FCC and Industry Canada (Class B), CE marked for the EMC Directive (EN61000-

6-1, -6-3)

Compatible Products List

XW Pro hybrid inverter XW Pro 6848 120/240 VAC (865-6848-21), XW Pro 8548 230 VAC 865-8548-55)

XW+ hybrid inverter XW+ 8548 230 VAC (865-8548-61)

SW IEC (230 VAC) SW 4024 230 VAC (865-4024-55), SW 4048 230 VAC (865-4048-55)

SW UL (120/240 VAC) SW 4024 120/240 VAC (865-4024-21), SW 4048 120/240 VAC (865-4048-21)

XW Power Distribution Panels 865-1015-01, 865-1014-01

XW Mini Power Distribution Panels 865-1013-01

MPPT Disconnect RS and RS initiator Switch 865-1036, 865-1039

Insight Energy Management InsightHome (865-0330), InsightFacility (865-0335), Insight

Conext System Control Panel 865-1050-01

Conext Automatic Generator Start 865-1060-01

Conext Battery Monitor 865-1080-01

Easy to install and commission for Rapid Shutdown PV arrays and NEC 2017 compliance MPPT Disconnect RS

A Rapid Shutdown transmitter, arc fault detection, and PV disconnect for use with MPPT 60 150, MPPT 80 600, and MPPT 100 600 charge controllers

Solution at a glance The MPPT Disconnect RS is an accessory for the Conext™ MPPT charge controllers. It provides a disconnect for the photovoltaic (PV) circuits, an integrated Rapid Shutdown transmitter, and arc fault detection for enhanced safety.

The MPPT Disconnect RS provides simplified NEC 2017 Compliance

• Integrated Rapid Shutdown transmitter using power line communication (PLC)

• Tested and PVRSS certified with Tigo® TS4-F range of Fire Safety receivers

• Arc fault detection certified to UL 1699B

• Compatible with Conext™ MPPT 100 600, MPPT

80 600, and MPPT 60 150 charge controllers

Integrated PV Disconnect

• 2 leg disconnect, compliant with NEC

• LOTO capability

• 2 input channels with up to 2 strings per channel

Flexible Installation

• Multiple configurations with Conext™

MPPT charge controllers

• Single Rapid Shutdown Initiator Switch can be used with multiple MPPT Disconnect RS for larger systems

• Side or bottom cable entry

• Mount on either side of the Conext™ MPPT charge controllers

4 Strings 2 Strings x 2 Channels

2 Strings x 1 Channel 2 Strings x 2 Channels

MPPT 60 150Qty 2 MPPT 100/80 600MPPT 100/80 600

Charge Controller Configurations with MPPT Disconnect RS

Technical Specifications MPPT Disconnect RS

© 2021 Schneider Electric. All Rights Reserved. All trademarks are owned by Schneider Electric Industries SAS or its affiliated companies. Specifications are subject to change without notice.

DS20210216_MPPT Disconnect RS.indd

MPPT Disconnect RS | 2

Device short name MPPT Disconnect RS Electrical specifications Max. PV array open circuit voltage 600 VDC

Max. array short-circuit current1 32 A (25.6 A @ STC) x 2 channels

Max. and min. PV input/output wire size #6 AWG to #14 AWG (13.5 to 2.5 mm²)

Control power input 48 VDC nominal (22-60 VDC)

General specifications PV Disconnect 2 channel, 4 pole DC disconnect switch

Arc fault circuit protection2 Type 1

Rapid Shutdown PLC transmitter included; Rapid Shutdown Initiator Switch ordered separately

Network communications Xanbus

Enclosure type Type 1, indoor rated

Product weight 4.5 kg (10 lb)

Product dimensions (H x W x D) 36.8 x 22 x 14.5 cm (14.48 x 8.66 x 5.7 in)

Shipping dimensions (H x W x D) 28.5 x 44.0 x 29.0 cm (11.22 x 17.32 x 11.41 in)

Ambient air temperature for operation -20°C to +50°C (-4°F to 122°F)

Operating altitude Sea level to 2000 m (6562 ft)

Regulatory

Safety UL1741, UL1741 CRD - PV Rapid Shutdown Systems (PVRSS), UL1699B, CSA C22.2 No. 107.1-16, CSA C22.2 No. 292-18, CSA (LTR) No. AE-004-2015

EMC FCC and Industry Canada (Class B)

Rapid Shutdown Initiator Switch (Ordered separately) Enclosure type Type 4X, outdoor rated

Ambient air temperature for operation -20°C to +50°C (-4°F to 122°F)

Compatible Product Part Numbers And Example Configurations

Products Part Number 1 x MPPT 100/80 2 x MPPT 100/80 3 x MPPT 100/80 4 x MPPT 100/80 1 x MPPT 60 2 x MPPT 60 3 x MPPT 60 4 x MPPT 60

Bill of Materials

MPPT 100 600 or

MPPT 80 600

865-1034 or

865-1032

1 2 3 4 - - - -

MPPT 60 150 865-1030-1 - - - - 1 2 3 4

MPPT Disconnect RS 865-1036 1 1 2 2 1 2 3 4

RS Initiator Switch 865-1039 1 1 1 1 1 1 1 1

PV Rapid Shutdown PVRSS Certified with Tigo TS4-F, TS4-A-F, TS4-A-2F, TS4-R-F (Fire Safety)

1. Refer to MPPT Charge Controller data sheet for total allowable short circuit current

2. With Xanbus communication to MPPT charge controller

XW Pro

MPPT 100 600

MPPT Disconnect RS PV String 1 with Tigo® TS4-F

PV String 2 with Tigo® TS4-F

Power Line Communication to TS4-FBattery RS Initiator Switch

Mini PDP

Example System Solution with MPPT Disconnect RS

SimpliPhi Power’s PHI 3.8-MTM Battery utilizes the safest Lithium Ion chemistry available, Lithium Ferro Phosphate (LFP). No cobalt or explosive hazards that put customers at risk. By eliminating cobalt, the risk of thermal runaway, fire propagation, operating temperature constraints, and toxic coolants are reduced. When combined with our integrated high-performance Battery Management System (BMS), accessible 80A DC breaker On/Off switch and overcurrent protection (OCPD), the PHI 3.8-M Battery delivers safe, highly efficient and cost-effective service over the life of both residential and commercial installations, on or off-grid. Compatible with all industry-standard inverter charge controllers, the PHI 3.8-M Battery supports balance-of-system equipment and optimizes any power generation source -solar, wind, grid, generator - with scalable, on-demand energy storage solutions for critical back-up and daily savings on electricity bills.

805-640-6700 | SIMPLIPHIPOWER.COM | © SIMPLIPHI POWER, INC.

PHI 3.8-M™ BATTERY

REV202106281048© SIMPLIPHI POWER, INC.

PHI 3.8 kWh Module- Metal 24V 48V

SKU PHI-3.8-24-M PHI-3.8-48-M

DC Voltages - Nominal 25.6 VDC 51.2 VDC

Amp-Hours 151 Ah 75 Ah

Maximum Rated kWh Capacity

3.87 kWh DC @ 100% DOD

3.10 kWh DC @ 80% DOD

3.87 kWh DC @ 100% DOD

3.10 kWh DC @ 80% DOD

MAX Discharge Rate (10 minutes) 80 Amps DC (2.05 kW DC) 80 Amps DC (4.1 kW DC)

MAX Continuous Discharge Rate 75 Amps DC (1.9 kW DC) 37.5 Amps DC (1.9 kW DC)

MAX Continuous Charge Rate 75 Amps DC (1.9 kW DC) 37.5 Amps DC (1.9 kW DC)

DC Voltage Range1 24 VDC to 28 VDC 48 VDC to 56 VDC

Depth of Discharge1 up to 100%

Charging Temperature1 32° to 120° F (0° to 49° C)

Operating Temperature1 -4° to 140° F (-20° to 60° C)

Storage Temperature 6 months: 14° to 77° F (-10° to 25° C) 3 months: -4° to 113° F (-20° to 45° C)

Self-Discharge Rate < 1% per month

Cycle Life 10,000+ cycles (@ 80% DOD)

Memory Effect None

Warranty 10 Years

Weight 86 lbs. (39.0 kg)

Dimensions (W x H x D)

13.5 x 14 x 8 in. (15.5” H w/terminals) / 0.88 ft3

(34.3 x 35.6 x 20.3 cm / 0.025 m3)

Model Number PHI3.8 24V M PHI3.8 48V M

1. Max operating ranges. Refer to Installation Manual for recommended conditions.

• All specifications listed are typical/nominal and subject to change without notice

• UN 3480, Lithium ion batteries, 9, II

• UL, CE, UN/DOT and RoHS compliant components - UL 1973, UL 1642

• Designed and manufactured in California, USA

PV BATTERY - BOCA CHITA BARN

805-640-6700 | TECHSUPPORT@SIMPLIPHIPOWER.COM | SIMPLIPHIPOWER.COM

REV202106281048© SIMPLIPHI POWER, INC.

48V Battery Voltage VS. Discharged Capacity

24V Battery Voltage VS. Discharged Capacity

C/2 Discharge Rate

C/2 Discharge Rate

C/3 Discharge Rate

C/3 Discharge Rate

C/5 Discharge Rate

C/5 Discharge Rate

PHI 3.8-MTM

BATTERY

WITH WALL MOUNT BRACKET

Terminals 3/8 IN 10 MM

Battery Cables 6 AWG MINIMUM

Refer to the Integration Guide section of SimpliPhi’s Product Documentation web page for wiring instructions, inverter and/or charge controller specific settings. Must be followed to maintain PHI Warranty.

PV BATTERY - BOCA CHITA BARN

https://simpliphipower.com/product-documentation/

ConextTM XW Power Distribution Panels offer flexibility for your solar and storage system design, including:

• Mini-Power Distribution Panel and Power Distribution Panel

• XW Connection Kit

• XW Conduit Box

• Compatible Breakers solar.schneider-electric.com

XW series inverters Power Distribution Panel (PDP)

ConextTM XW Series Power Distribution Easy to install, flexible and scalable balance of system solutions

Mini Power Distribution Panel (Mini PDP)

Configuration with XW Mini PDPConfiguration with XW PDP

XW Connection Kit or Conduit Box

XW series inverters https://solar.schneider-electric.com/

XW Mini Power Distribution Panel XW Series Power Distribution | 2

XW Mini PDP Part number 865-1013-01

Standards UL

AC Distribution

Included breakers Three 60 A, 120/240 Vac, two-pole, Square D QOU260 AC breakers for AC input, bypass and AC load

(factory-installed)

Mounting DIN rail (35 mm)

Breaker expansion positions One additional expansion position for a 2 pole Square D QOU breaker

AC wiring Factory installed and labeled Arctic Ultraflex BlueTM wiring, including five #6 AWG Arctic AC cables for AC connections: L1, L2, Neutral

DC Distribution

Included breakers One GJ 250A 160 Vdc, 3/8” stud DC breaker installed

Mounting Panel mounted

Breaker expansion positions 2 expansion positions for charge controller DC breakers.