Attachment 7- DD Form 1664 for Outside Dimension Grinder.pdf
PDF 19 KB Posted
- Attached to
- Cylindrical OD Grinder (Updated 9/2/2021) Federal contract opportunity
- Solicitation number
- W911KF-21-Q-0038
About this file
This document contains a federal solicitation for the purchase and installation of a Computer Numerical Controlled cylindrical outside dimension grinder. The Army Materiel Command Contracting Command Detroit Arsenal is seeking proposals to deliver, install, and perform tests on a CNC cylindrical OD grinder and ancillary equipment at a facility located in Anniston, Alabama. The North American Industry Classification for this procurement is 333517 and the size standard is 500. Interested vendors should periodically check www.sam.gov for any amendments, with completed proposals due by the date and time specified. The point of contact listed is Kishawn Banks of the Army Materiel Command Contracting Command Detroit Arsenal.
This data item description provides the technical requirements for commercial off-the-shelf manuals and engineering support documentation relating to a CNC grinder. Acceptable manuals must conform to MIL-M-7298 and include electrical schematics, parts lists, troubleshooting procedures, maintenance requirements, and other technical data normally furnished. Three copies of manuals and documentation must be provided on CD along with the delivered CNC grinder.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| 21Q0038 Amendment 1.pdf | ||
| SOW for OD Grinding Equipment Updated 2SEP21.pdf | ||
| Attachment 2 - Evidence of Authority To Sign Offers.pdf | ||
| Attachment 4 - Request for Technical Literature.pdf | ||
| Attachment 5 - Past Performance Questionnaire.pdf | ||
| W911KF-21-Q-0038 Solicitation.pdf | ||
| Attachment 3 - SioanForm380-2 Personal Data Questionnaire.pdf | ||
| Attachment 6 -DD Form 1423 - CDRL Outside Dimension Grinders (1).pdf | ||
| Attachment 1 - SOW OD Grinder.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Form Approved OMB No. 0704-0188
Page ___ of _____ Pages Designed using Perform Pro, WHS/DIOR, Aug 96
PREVIOUS EDITION MAY BE USED.DD FORM 1664, AUG 96 (EG)
DATA ITEM DESCRIPTION
1. TITLE 2. IDENTIFICATION NUMBER
3. DESCRIPTION/PURPOSE
4. APPROVAL DATE
(YYYYMMDD)
5. OFFICE OF PRIMARY RESPONSIBILITY (OPR) 6a. DTIC APPLICABLE 6b. GIDEP APPLICABLE
7. APPLICATION/INTERRELATIONSHIP
8. APPROVAL LIMITATION 9a. APPLICABLE FORMS 9b. AMSC NUMBER
10. PREPARATION INSTRUCTIONS
11. DISTRIBUTION STATEMENT
The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THE ABOVE ADDRESS.
| 1 TITLE: Commercial off the Shelf Manuals (COTS) |
| 2 IDENTIFICATION NUMBER: Operator' Manual CDRL A01 DI-TMSS-80527A |
Engineering Support Manuals CDRL A02 DI-TMSS-80527A Engineering Drawings CDRL A04 DI-SESS-81003B Equipment Manuals CDRL A05 DI-TMSS-80527A 3 DESCRIPTIONPURPOSE: 7.1 Content: The manuals shall include electrical, hydraulic, and pneumatic schematics, as applicable; parts lists, trouble shooting procedures, preventive maintenance requirements, lubrication schedules, calibration procedures, etc. Catalogs shall fully describe optional tooling, fixtures, and attachments available for the equipment furnished. In addition, any other technical data normally furnished with the equipment shall be provided. All technical data shall be furnished in the English language and be in accordance with (IAW) the following data item descriptors (DIDs)
| 4 APPROVAL DATE YYYYMMDD: |
| 5 OFFICE OF PRIMARY RESPONSIBILITY OPR: |
| 6a DTIC APPLICABLE: |
| 6b GIDEP APPLICABLE: |
| 7 APPLICATIONINTERRELATIONSHIP: This Data Item Description (DID) is applicable when existing COTS manuals are acquired in order to evaluate their acceptability for Government use. |
COTS mauals are acceptable for Government use when they conform to applicable requirements of 6.1 of MIL-M-7298.
| 8 APPROVAL LIMITATION: |
| 9a APPLICABLE FORMS: |
| 9b AMSC NUMBER: |
| 10 PREPARATION INSTRUCTIONS: 6.0 Documentation: The contractor shall provide documentation to the government |
as listed below. Three copies each of the following technical data shall be provided as specified on the attached DD Form 1423 with the CNC grinder. The contractor shall also provide three CDs that each contains copies of the delivered documentation.
| 11 DISTRIBUTION STATEMENT: |
| of: |
File details come from the government source that posted it. Updated .