Attachment_3_Cape_Cod_National_Seashore_Construction_Drawings.pdf

Cape Cod National Seashore

Sign Construction Details New Sign Program October 12, 2015

P14PX00877

Office of NPS Identity

Harpers Ferry Center

Interpretive Design Center

Harpers Ferry, WV 25425

304-535-4069

NOTICE

All upright (UP) and wallmount (WM) structures are to be constructed of aluminum with a hand-sanded finish.

Attachment 3

Cape Cod National Seashore

Table of Contents

1.0

2.0

3.0

4.0

5.0

6.0

8.0

9.0

10.0

11.0

12.0

13.0

14.0

15.0

16.0

17.0

18.0

19.0

20.0

21.0

22.0

Park Identity UP 36x18 GS DE SB (ID-1, ID-3)

UP 24x12 GS DE SB (ID-4)

UP 18x12 GS DE SB (ID-6)

WM 24x12 GS (ID-5)

WM 18x12 GS (ID-5)

WM 12x12 GS (ID-7)

Motorist Guidance Single 4x4 Wood Post / 0.080 Aluminum Panel

Double 4x6 Post / 0.125 Aluminum Panel

Double 6x8 Wood Post / Extruded Aluminum Panel

VIS

9x18 Single 2X2 Steel Post (Vehicular)

12x24 Single 2X2 Steel Post (Vehicular)

24x24 Single 4x4 Wood Post (Vehicular)

24x24 Single 4x4 Wood Post (Bike)

18x22.25 Single 4x4 Wood Post (Bike)

18x18 Single 4x4 Wood Post (Bike)

12x24 Single 2x2 Steel Post (Bike/Trail)

18xV Single 4x4 Wood Post (Trail)

18xV Single 4x4 Wood Post (Pedestrian)

12x24 Single 4x4 Wood Post (Beach)

12x18 Single 2x2 Steel Post (Pet)

8.5x11 Single 2x2 Wood Post (Temporary)

36xV Double 4x4 Post (Bike) 23.0

NOTE:

Drawings depicted in this document are considered design-intent.

The contractor shall evaluate all construction details and provide Fabrication Shop Drawings for structures that fulfill the required function while honoring the appearance of the sign drawings.

There are structures which require the contractor to finish the detailing of the design. All details must be shown in the Fabrication Shop Drawings.

Table of Contents VIS (continued) UP 12x12 GS DE SB 24.0

UP 12x18 GS DE SB 25.0

UP 12x24 GS DE SB 26.0

UP 18x24 GS DE SB 27.0

UP 18x36 GS DE SB 28.0

UP 24x36 GS DE SB 29.0

UP 36x48 GS DE SB 30.0

UPN2 18x36 GS DE SB 31.0

UPN2 18x36 / 24x36 GS DE SB 32.0

Mile Marker 33.0

Restroom ID 34.0

Restroom Flag 35.0

Room ID 36.0

8.5x11 Temporary 37.0

BH.0

BR.0

DE.0

MAG.0

MP.0

UP1.0

UP2.0

UPN.20

Common Details & Accessories

Brochure Holder Accessory

Breakaway Flange Detail

Footer Options

Magnetic Motorist Guidance Strip Miscellaneous

Posting

UP Single 2x2 Frame

UP Single 2x3 Frame

UP 2 Inline Frame

Wall Mounted VIS WM1.0

PARK

PROJECT NUMBER

P14PX00877

UNIT | AREA

DRAWING SCALE

ENLARGE FOR FULL SCALE

SIGN CATEGORY

DESCRIPTION

STRUCTURE: QTY:

06/12/2015

REVISION DATE

1. 8/7/2015

2. 9/9/2015

3. 10/12/2015 4.

DRAWING NUMBER

National Park Service U.S. Department of the InteriorIMPORTANT NOTE: All steel components and hardware shall be heavy duty hot dipped galvanized for marine conditions.

Cape Cod National Seashore National Park Service U.S. Department of the Interior

Race Point Beach

1-UP2.0

.125 Gel Coated Fiberglass Embedded Panel

2" 3'-0" 2"

2'-8" 1'-6"

3" Upright single sided structure per NPS VIS standards-constructed of Sanded Aluminum.

See installation options. Final footing to be determined through proper engineering, handled by selected fabricator.

2'-10 1/2"

1.0 | CACO

1-1.0 UP 36x18 GS DE SB

Front Elevation

2-1.0 UP 36x18 GS DE SB

Construction Overview

1/2” = 1’ - 0”

VIS

2400%

UP_36x18_GS_DE_SB 1

VIS 36/18 -

Exterior Grade Graphic Panel Gel Coated Fiberglass Embedded, per details page 7.

Refer to Attachment 3: NPS Visitor Information Sign System Hardware Manual for fabrication details for aluminum upright sign structures. All upright sign structures in this requirement are to be constructed of aluminum with a hand-sanded finish.

lhthomas Highlight

PROJECT NUMBER

P14PX00877

UNIT | AREA

DRAWING SCALE

ENLARGE FOR FULL SCALE

SIGN CATEGORY

DESCRIPTION

STRUCTURE: QTY:

06/12/2015

REVISION DATE

1. 8/7/2015

2. 9/9/2015

3. 10/12/2015 4.

DRAWING NUMBER

National Park Service U.S. Department of the InteriorIMPORTANT NOTE: All steel components and hardware shall be heavy duty hot dipped galvanized for marine conditions.

1-UP2.0

3" Upright single sided structure per NPS VIS standards-constructed of Sanded Aluminum.

See installation options. Final footing to be determined through proper engineering, handled by selected fabricator.

2" 2'-0" 2"

2'-8" 1'-0"

.125 Gel Coated Fiberglass Embedded Panel

1'-10 1/2"

2.0 | CACO

1-2.0 UP 24x12 GS DE SB

Front Elevation

2-2.0 UP 24x12 GS DE SB

Construction Overview

1/2” = 1’ - 0”

VIS

2400%

UP_24x12_GS_DE_SB 1

VIS 24/12

Exterior Grade Graphic Panel Gel Coated Fiberglass Embedded, per details page 7.

Refer to Attachment 3: NPS Visitor Information Sign System Hardware Manual for fabrication details for aluminum upright sign structures. All upright sign structures in this requirement are to be constructed of aluminum with a hand-sanded finish.

PROJECT NUMBER

P14PX00877

UNIT | AREA

DRAWING SCALE

ENLARGE FOR FULL SCALE

SIGN CATEGORY

DESCRIPTION

STRUCTURE: QTY:

06/12/2015

REVISION DATE

1. 8/7/2015

2. 9/9/2015

3. 10/12/2015 4.

DRAWING NUMBER

National Park Service U.S. Department of the InteriorIMPORTANT NOTE: All steel components and hardware shall be heavy duty hot dipped galvanized for marine conditions.

1-UP2.0

3" Upright single sided structure per NPS VIS standards-constructed of Sanded Aluminum.

See installation options. Final footing to be determined through proper engineering, handled by selected fabricator.

2" 1'-6" 2"

2'-8" 1'-0"

.125 Gel Coated Fiberglass Embedded Panel

1'-4 1/2"

3.0 | CACO

1-3.0 UP 18x12 GS DE SB

Front Elevation

2-3.0 UP 18x12 GS DE SB

Construction Overview

1/2” = 1’ - 0”

VIS

2400%

UP_18x12_GS_DE_SB 1

VIS 18/12 -

Exterior Grade Graphic Panel Gel Coated Fiberglass Embedded, per details page 7.

Refer to Attachment 3: NPS Visitor Information Sign System Hardware Manual for fabrication details for aluminum upright sign structures. All upright sign structures in this requirement are to be constructed of aluminum with a hand-sanded finish.

PROJECT NUMBER

P14PX00877

UNIT | AREA

DRAWING SCALE

ENLARGE FOR FULL SCALE

SIGN CATEGORY

DESCRIPTION

STRUCTURE: QTY:

06/12/2015

REVISION DATE

1. 8/7/2015

2. 9/9/2015

3. 10/12/2015 4.

DRAWING NUMBER

National Park Service U.S. Department of the InteriorIMPORTANT NOTE: All steel components and hardware shall be heavy duty hot dipped galvanized for marine conditions.

Old Harbor

National Park Service U.S. Department of the Interior

Cape Cod National Seashore

Life-Saving Station Museum

1-WM1.0

1-WM1.0A

.125 Gel Coated Fiberglass Embedded Panel

Constructed of Sanded Aluminum per NPS VIS standards*.

1'-0"

10 1/2"

2'-0"

1'-10 1/2"

5'-0"

4.0 | CACO

1-4.0 WM 24x12 GS

Front Elevation

2-4.0 WM 24x12 GS

Construction Overview

1/2” = 1’ - 0”

VIS

2400%

WM_24x12_GS 1

VIS 24/12 -

Exterior Grade Graphic Panel Gel Coated Fiberglass Embedded, per details page 7.

Refer to Attachment 3: NPS Visitor Information Sign System Hardware Manual for fabrication details for aluminum wall mount sign structures. All wall mount sign structures in this requirement are to be constructed of aluminum with a hand-sanded finish.

PROJECT NUMBER

P14PX00877

UNIT | AREA

DRAWING SCALE

ENLARGE FOR FULL SCALE

SIGN CATEGORY

DESCRIPTION

STRUCTURE: QTY:

06/12/2015

REVISION DATE

1. 8/7/2015

2. 9/9/2015

3. 10/12/2015 4.

DRAWING NUMBER

National Park Service U.S. Department of the InteriorIMPORTANT NOTE: All steel components and hardware shall be heavy duty hot dipped galvanized for marine conditions.

Oversand

National Park Service U.S. Department of the Interior

Cape Cod National Seashore

Permit Of f ice

1-WM1.0

1-WM1.0A

.125 Gel Coated Fiberglass Embedded Panel

1'-0"

10 1/2"

1'-6"

1'-4 1/2"

Constructed of Sanded Aluminum per NPS VIS standards*.

5'-0"

5.0 | CACO

1-5.0 WM 18x12 GS

Front Elevation

2-5.0 WM 18x12 GS

Construction Overview

1/2” = 1’ - 0”

VIS

2400%

WM_18x12_GS 1

VIS 18/12 -

Exterior Grade Graphic Panel Gel Coated Fiberglass Embedded, per details page 7.

Refer to Attachment 3: NPS Visitor Information Sign System Hardware Manual for fabrication details for aluminum wall mount sign structures. All wall mount

PROJECT NUMBER

P14PX00877

UNIT | AREA

DRAWING SCALE

ENLARGE FOR FULL SCALE

SIGN CATEGORY

DESCRIPTION

STRUCTURE: QTY:

06/12/2015

REVISION DATE

1. 8/7/2015

2. 9/9/2015

3. 10/12/2015 4.

DRAWING NUMBER

National Park Service U.S. Department of the InteriorIMPORTANT NOTE: All steel components and hardware shall be heavy duty hot dipped galvanized for marine conditions.

National Park Service U.S. Department of the Interior

1-WM1.0

1-WM1.0A

1'-0"

10 1/2"

1'-0"

10 1/2"

Constructed of Sanded Aluminum per NPS VIS standards*.

3'-3"

.125 Gel Coated Fiberglass Embedded Panel

3"

6.0 | CACO

1-6.0 WM 12x12 GS

Front Elevation

2-6.0 WM 12x12 GS

Construction Overview

1/2” = 1’ - 0”

VIS

2400%

WM_12x12_GS 1

VIS 12/12 -

Exterior Grade Graphic Panel Gel Coated Fiberglass Embedded, per details page 7.

Refer to Attachment 3: NPS Visitor Information Sign System Hardware Manual for fabrication details for aluminum wall mount sign structures. All wall mount

PROJECT NUMBER

P14PX00877

UNIT | AREA

DRAWING SCALE

ENLARGE FOR FULL SCALE

SIGN CATEGORY

DESCRIPTION

STRUCTURE:

PANEL:

QTY:

QTY:

03/23/2021

REVISION DATE

DRAWING NUMBER

National Park Service U.S. Department of the Interior

7.0 | CACO

Not to Scale - sample drawings only

ID & VIS

1200%

UP_Varies_GS 1

Exterior Grade Graphic Panels Gel Coated Fiberglass Embedded Sizes range: 36”x 48” to 12”x 12”

Notice

No Climbing Erosion Control Area

Cape Cod National Seashore

Each panel shall consist of a solid one-piece panel with 600 dpi or higher ink jet graphics embedded in fiberglass. Four-color CMKY images shall be printed on an ink jet printer using ultraviolet resistant pigmented inks. Images shall be printed on a specially formulated substrate capable of resin saturation to ensure a true fiberglass embedment. Encapsulation is not acceptable.

The imaged substrate shall be embedded in fiberglass with an additional embedded gel coat layer according to the following specifications:

Resin shall be non-yellowing R-70 clear resin or UV stabilized, acrylic modified polyester resin, reinforced with high solubility, chopped strand fiberglass mat so that the index of refraction ensures total clarity of all color, copy, and graphics. Glass fibers must not be readily discernible on the panel surface.

Panels must have glass content no less than 28% of total panel weight.

Panels must be able to withstand temperatures from -65 to 350 degrees Fahrenheit.

Panel must have a minimum Barcol hardness factor of 50, tensile strength of 12,000 psi, comprehensive strength of 20,000 psi, and flexural strength of 18,000 psi, minimum impact strength must beat 6 ft bls/in notch with a fire resistance of 500˚f.

Face must not be permanently defaced by steam, acid aromatics, scratching, inks, or paints and should be readily wiped clean with paint remover and solvents without affecting the appearance or legibility of finished or graphics.

Face shall retain legibility and finished appearance when sprayed with a 10% solution of hydrochloric, nitric, or sulfuric acid for one half-hour or when scrubbed by a brush or medium hardness using common commercial cleaning compounds such as ammonia, laundry soaps, detergent, carbon tetrachlo-ride, or petroleum-based solvents.

Panel must be opaque with a matte finish with a minimum embedment of all graphic elements of .030”.

Exterior Grade Graphic Panels are to be Gel Coated Fiberglass Embedded Panels as follows:

Panel art shall be full size all the way to the edge of the panel.

Panel edges are to be smooth and clean, not crazed or cracked.

Total panel thickness is to be (and exceed) 0.125”.

Panels are to be trimmed to 1/8” under normal dimensions with a tolerance of +/- 1/32”.

Panel sizes range from 36” x 48” to 12” x 12”

Size and Trim Panel Materials and Performance

Exterior Grade Graphic Panels:

Gel Coated Fiberglass Embedded Panels

PARK

Cape Cod National Seashore

PROJECT NUMBER

P14PX00877

UNIT | AREA

DRAWING SCALE

ENLARGE FOR FULL SCALE

SIGN CATEGORY

DESCRIPTION

STRUCTURE:

PANEL:

QTY:

QTY:

03/23/2021

REVISION DATE

DRAWING NUMBER

National Park Service U.S. Department of the Interior

7.1 | CACO

Not to Scale - sample drawings only

ID & VIS

1200%

UP_Varies_GS 1

Exterior Grade Graphic Panels Gel Coated Fiberglass Embedded Sizes range: 36”x 48” to 12”x 12”

Notice

No Climbing Erosion Control Area

Cape Cod National Seashore

*CMYK values are approximations. Contractor must calibrate color values to achieve ink jet output that matches PMS swatches.

VIS Sign Panel Color Swatches

PMS 449 C

ID Overbar

PMS 7531 C

ID Panel

C31 M38 Y75 K76* White

Type, Arrowhead

Details

C16 M29 Y38 K53*

C6 M7 Y10 K11*

VIS Panel Bkg

C0 M95 Y100 K0*

Prohibition/Danger

C100 M53 Y4 K19*

Accessible

C53 M61 Y47 K83*

VIS Panel Bkg and Overbar

C0 M30 Y100 K0*

Caution/Warning - VIS

PMS Warm Gray 2 PMS 485 PMS 301

PMS 1615

Rich Black

Text, Overbars, Symbols

White

Text and Symbols

PMS 124

Identity Sign Panel Color Swatches

C10 M72 Y100 K46

Arrowhead Mtn and Outline

C6 M71 Y100 K32

Arrowhead sky

C82 M30 Y65 K76

Arrowhead Grass and Tree

PMS 1615 PMS 1605 PMS 553

PROJECT NUMBER

P14PX00877

UNIT | AREA

DRAWING SCALE

ENLARGE FOR FULL SCALE

SIGN CATEGORY

DESCRIPTION

STRUCTURE: QTY:

06/12/2015

REVISION DATE

1. 8/7/2015

2. 9/9/2015

3. 10/12/2015 4.

DRAWING NUMBER

National Park Service U.S. Department of the InteriorIMPORTANT NOTE: All steel components and hardware shall be heavy duty hot dipped galvanized for marine conditions.

Painted Back, Mounting Rail, Post Color:

NPS Brown Matthews Paint

MP63848

PMS 553

NPS Park Boundary Overbar

PMS 1615

Recreation Brown Vinyl

3"

.080 Aluminum Sign Panel

1/4"-20 x 5" Long Galvanized Steel

Carriage Bolt with Washer and Nut

4x4 Breakaway Timber Post Painted to Match NPS Brown, Matthews Paint

MP63848

All steel components shall be heavy duty hot dipped galvanized for marine conditions.

.080 Aluminum Sign Panel with 3/8" Radius Corners, Panel Back Painted to Match NPS Brown, Matthews Paint MP63848

Avery T6500 White, Type III/IV Very High Intensity or Equivalent Full Sheet Application to Aluminum Panel

Avery OL2009 Recreation Brown Translucent Overlay Film with Compute-Cut Graphics

GL

D ep en d in g o n S ig h t Li n es a n d L o ca l C o n d it io n s

4x4 Wood Posts Painted to Match NPS Brown, Matthews Paint MP63848

Breakaway or Frangible Coupling as Required by

State and Local Codes Detail BR.0

Footer Engineering and Depth as Required for

Structural Integrity and Per State and Local Codes

4-8.0

3"

1"

See Drawing

Motorist Guidance

1-8.0 Typical Aluminum Sign Fabrication

Exploded View

2-8.0 Colors

3-8.0 Typical Aluminum Sign

Scale: 3/8” = 1’-0” Front & Side Elevations

4-8.0 Panel Post Attachment Detail

Scale: 3” - 1’-0”

8.0 | CACO

Single 4x4 Wood Post (per local codes) 1 Painted NPS Brown

0.080 Aluminum with Retro-Reflective

Vinyl, 3/8” Radius Corners and Painted NPS Brown Back 1 lhthomas Highlight

PROJECT NUMBER

P14PX00877

UNIT | AREA

DRAWING SCALE

ENLARGE FOR FULL SCALE

SIGN CATEGORY

DESCRIPTION

STRUCTURE: QTY:

06/12/2015

REVISION DATE

1. 8/7/2015

2. 9/9/2015

3. 10/12/2015 4.

DRAWING NUMBER

National Park Service U.S. Department of the InteriorIMPORTANT NOTE: All steel components and hardware shall be heavy duty hot dipped galvanized for marine conditions.

to

4”

19” to 24” eq eq

2" 26” to 36” to

6” eq eq

4" 4"

2" eq eq to

6”

13” to 16”

1" 1"

25” to 30” to

0” eq eq

3" 3"

3/4” = 1’ - 0”

Motorist Guidance

1600% 1-8.0A Typical Aluminum Mounting Hole Locations

Exploded View

3-8.0A Typical Aluminum Mounting Hole Locations

Exploded View

2-8.0A Typical Aluminum Mounting Hole Locations

Exploded View

4-8.0A Typical Aluminum Mounting Hole Locations

Exploded View

8.0A | CACO

Single 4x4 Wood Post (per local codes) 1 Painted NPS Brown

0.080 Aluminum with Retro-Reflective

Vinyl, 3/8” Radius Corners and Painted NPS Brown Back 1

PROJECT NUMBER

P14PX00877

UNIT | AREA

DRAWING SCALE

ENLARGE FOR FULL SCALE

SIGN CATEGORY

DESCRIPTION

STRUCTURE: QTY:

QTY:

06/12/2015

REVISION DATE

1. 8/7/2015

2. 9/9/2015

3. 10/12/2015 4.

DRAWING NUMBER

National Park Service U.S. Department of the InteriorIMPORTANT NOTE: All steel components and hardware shall be heavy duty hot dipped galvanized for marine conditions.

Breakaway or Frangible Coupling as Required by

State and Local Codes Detal BR.0

Footer Engineering and Depth as Required for

Structural Integrity and Per State and Local Codes

Line of T-Bar Extrusion Back Welded to Panel Every 12" O.C.

For Support

1-9.0C

1-9.0B

GL

D ep en d in g o n S ig h t Li n es a n d L o ca l C o n d it io n s

Painted Back NPS Brown Matthews Paint

MP63848

PMS 553

NPS Park Boundary Overbar

PMS 1615

Recreation Brown Vinyl

1/4" Thick Aluminum Continuous “Z-Bar” Mounting Rail, Painted to Match NPS Brown, Matthews Paint MP63848

.125 Aluminum Sign Panel with 3/8" Radius Corners, Panel Back Painted to Match NPS Brown, Matthews Paint MP63848

Avery T6500 White, Type III/IV Very High Intensity or Equivalent Full Sheet Application to Aluminum Panel

Recreation Brown Translucent Overlay Film with Compute-Cut Graphics

4x6 Wood Posts Painted Match NPS Brown, Matthews Paint MP63848

1/4” = 1’-0”

Motorist Guidance

1600%

1-9.0 Typical Aluminum Sign Fabrication Exploded View

2-9.0 Panel Colors

3-9.0 Typical Aluminum Sign Front & Side Elevations

9.0 | CACO

4x6 Wood Posts (per local codes) 2 Painted NPS Brown

0.125 Aluminum with Retro-Reflective

Vinyl, 3/8” Radius Corners and Painted NPS Brown Back 1 lhthomas Highlight

PROJECT NUMBER

P14PX00877

UNIT | AREA

DRAWING SCALE

ENLARGE FOR FULL SCALE

SIGN CATEGORY

DESCRIPTION

STRUCTURE: QTY:

QTY:

06/12/2015

REVISION DATE

1. 8/7/2015

2. 9/9/2015

3. 10/12/2015 4.

DRAWING NUMBER

National Park Service U.S. Department of the InteriorIMPORTANT NOTE: All steel components and hardware shall be heavy duty hot dipped galvanized for marine conditions.

U p t o

6"

5" 5"

Up to 96"

4" 4" 3/8" Radius Corners (Typ)

5/16" Mounting Holes (Typ)

Panel Back Painted To Match NPS Brown (Typ)

1/4” = 1’ - 0”

Motorist Guidance

1600%

1-9.0A Typical 1.25 Aluminum Panel Details Single Sheet, Four (4) Mounting Holes

9.0A | CACO

4x6 Wood Posts (per local codes) 2 Painted NPS Brown

0.125 Aluminum with Retro-Reflective

Vinyl, 3/8” Radius Corners and Painted

PROJECT NUMBER

P14PX00877

UNIT | AREA

DRAWING SCALE

ENLARGE FOR FULL SCALE

SIGN CATEGORY

DESCRIPTION

STRUCTURE: QTY:

06/12/2015

REVISION DATE

1. 8/7/2015

2. 9/9/2015

3. 10/12/2015 4.

DRAWING NUMBER

National Park Service U.S. Department of the InteriorIMPORTANT NOTE: All steel components and hardware shall be heavy duty hot dipped galvanized for marine conditions.

Varies Based on Sign Size, See Chart

1/2"-13 Round Head, Square Neck Galvanized Steel Carriage Bolt with Flat Washer and Hex Nut (Bolt Length Based on Post Size)

1/4" Thick Aluminum Continuous “Z-Bar” Mounting Rail, Paint to Match NPS Brown, Matthews Paint MP63848

2"

4" 1/4"-20 x 1" Length Large Diameter Round Head 18-8 Stainless Steel Slotted Machine Screw with Washer and Hex Nut

Note: High Bond Adhesive Tape Along Entire Length of Rail

.125 Aluminum Sign Panel with 3/8" Radius Corners, Panel Back Painted to Match NPS Brown, Matthews Paint MP63848

Panel Width

60" or smaller

62"– 70"

72"– 94"

96"– 106"

Post Inset to Panel Edge

6"

8"

10"

12"

3” = 1’ - 0”

Motorist Guidance

400%

9.0B | CACO

4x6 Wood Posts (per local codes) 2 Painted NPS Brown

0.125 Aluminum with Retro-Reflective

Vinyl, 3/8” Radius Corners and Painted

1-9.0B Typical 1.25 Aluminum Panel Post Attachment Detail

PROJECT NUMBER

P14PX00877

UNIT | AREA

DRAWING SCALE

ENLARGE FOR FULL SCALE

SIGN CATEGORY

DESCRIPTION

STRUCTURE: QTY:

06/12/2015

REVISION DATE

1. 8/7/2015

2. 9/9/2015

3. 10/12/2015 4.

DRAWING NUMBER

National Park Service U.S. Department of the InteriorIMPORTANT NOTE: All steel components and hardware shall be heavy duty hot dipped galvanized for marine conditions.

1/4" Thick Aluminum Continuous “Z-Bar” Mounting Rail, Paint to Match NPS Brown, Matthews Paint MP63848

.125 Aluminum Sign Panel with 3/8" Radius Corners, Panel Back Painted to Match NPS Brown, Matthews Paint MP63848

1" x 1" x 1/8" Thick Aluminum Continuous “T-Bar” Extrusion, Back Welded to Panel For Support

6 1/4"

5" 3 3/4"

5"

Note: Very High Bond Adhesive Tape Along Entire Length of Rail

5/16" Diameter Hole to Accept 1/4"-20 Screw

5/16" Diameter Hole to Accept

1/2"-13 Bolt

2 1/2" 2 1/2"

3"

1 1/4"1 1/4"1 1/4"1 1/4"

1/2"-13 Round Head, Square Neck

Galvanized Steel Carriage Bolt with

Flat Washer and Hex Nut (Bolt Length Based on Post Size)

1/4"-20 x 1" Long Large Diameter

Round Head 18-8 Stainless Steel

Slotted Machine Screw with Washer and Hex Nut

1"

6 1/2"

3/4” = 1’ - 0”

Motorist Guidance

1600%

9.0C | CACO

4x6 Wood Posts (per local codes) 2 Painted NPS Brown

0.125 Aluminum with Retro-Reflective

Vinyl, 3/8” Radius Corners and Painted NPS Brown Back 1

1-9.0C Typical 1.25 Aluminum Sign Side Section

Note: Panel Back, Z-Bar Mounting Rails, and T-Bar Extrusions Painted to Match NPS Brown, Matthews Paint MP63848

2-9.0C “Z-Bar” Mounting Rail Detail

PROJECT NUMBER

P14PX00877

UNIT | AREA

DRAWING SCALE

ENLARGE FOR FULL SCALE

SIGN CATEGORY

DESCRIPTION

STRUCTURE: QTY:

06/12/2015

REVISION DATE

1. 8/7/2015

2. 9/9/2015

3. 10/12/2015 4.

DRAWING NUMBER

National Park Service U.S. Department of the InteriorIMPORTANT NOTE: All steel components and hardware shall be heavy duty hot dipped galvanized for marine conditions.

6x8 Wood Posts Painted to Match NPS Brown, Matthews Paint MP63848

Breakaway or Frangible Coupling as Required by

State and Local Codes

Footer Engineering and Depth as Required for

Structural Integrity and Per State and Local Codes

GL

D ep en d in g o n S ig h t Li n es a n d L o ca l C o n d it io n s

Extruded Aluminum Panels with Avery T-5409 Brown Type III/IV Very High Intensity or Equivalent Full Sheet Wrap, Back Painted to Match NPS Brown, Matthews Paint MP63848

Edge Strip Painted to Match NPS Brown, Matthews Paint MP63848

1/4" Thick Aluminum Mounting Angles Painted to Match NPS Brown, Matthews Paint MP63848

Avery Type III/IV Very High Intensity or Equivalent Border and Panel Graphics

1-10.0B

NPS Brown Matthews Paint

MP63848

(Or equiv.)

Panel Back, Mounting Rail, Post Color:

Panels 96" and Wider Require Three (3) Posts

See Drawing

Motorist Guidance

1-10.0 NPS Standard Extruded Aluminum

With Posts

2-10.0 NPS Standard Extruded Aluminum

Double or Triple Post- Panels Wider than 48”

10.0 | CACO

6x8 Wood Posts (per local codes) Painted NPS Brown

Extruded Aluminum with Retro- Reflective Vinyl, and Painted NPS Brown Back 1 lhthomas Highlight

PROJECT NUMBER

P14PX00877

UNIT | AREA

DRAWING SCALE

ENLARGE FOR FULL SCALE

SIGN CATEGORY

DESCRIPTION

STRUCTURE: QTY:

06/12/2015

REVISION DATE

1. 8/7/2015

2. 9/9/2015

3. 10/12/2015 4.

DRAWING NUMBER

National Park Service U.S. Department of the InteriorIMPORTANT NOTE: All steel components and hardware shall be heavy duty hot dipped galvanized for marine conditions.

12"

2"

2"

Retro-Reflective Vinyl Wrap

Note: Overlay extend approx. 3/8" over each side in the narrow direction and shall be adhered to the panel.

Stitch Bolts @ 24" O.C.

Post Clip

Slotted Hole 7/16" x 7/8"

Sign Panel

Slotted Holes Drilled 12" O.C.

End Holes 6" From Ends of Panel

Panel

3/8" Diameter 16 UNC x 1 3/4"

Bolt Lock Nut and Washer

Retro-Reflective Vinyl Wrap

Extruded Aluminum Full Panel

Extruded Aluminum Half Panel

6"

6" 12" 12"

See Drawing

Motorist Guidance

1-10.0A Typical Extruded Aluminum Panel Elevations

Scale: 1/2” - 1”

2-10.0A Sign Panel Assembly - Side Section Cut

Scale: 3” - 1’-0”

3-10.0A Slotted Hole Detail - Plan View

Scale: 1” - 1’-0”

First slots in from both edges are bolted. Remaining slots are typically spaced 12”

10.0A | CACO

6x8 Wood Posts (per local codes) Painted NPS Brown

Extruded Aluminum with Retro- Reflective Vinyl, and Painted NPS Brown Back 1

PROJECT NUMBER

P14PX00877

UNIT | AREA

DRAWING SCALE

ENLARGE FOR FULL SCALE

SIGN CATEGORY

DESCRIPTION

STRUCTURE: QTY:

06/12/2015

REVISION DATE

1. 8/7/2015

2. 9/9/2015

3. 10/12/2015 4.

DRAWING NUMBER

National Park Service U.S. Department of the InteriorIMPORTANT NOTE: All steel components and hardware shall be heavy duty hot dipped galvanized for marine conditions.

4" x 4" x 1/2" Thick Continuous Aluminum Angle Mounted to Post, Paint Same Color as Post

1/2"-13 Round Head, Square Neck Galvanized

Steel Carriage Bolt Post Clip

Sign Panel

3/8" Diameter 16 UNC x 1 3/4" Bolt Lock Nut and Washer

Stainless Steel or Aluminum Size #6 x 1/2"

Slotted Pan Head Screws @ 24" C.C.

or 1/8" S.S. Blind

Rivets

Sign Panel

Aluminum Edge Strip

3/4"

2"

3” = 1’-0”

Motorist Guidance

400%

1-10.0B Panel-Post Attachment Detail

2-10.0B Edge Strip Detail - Top Section Cut

Note: An additional 1-1/2” shall be added to panel width dimensions to accommodate for edge strip overhang. 10.0B | CACO

6x8 Wood Posts (per local codes) Painted NPS Brown

Extruded Aluminum with Retro-

PROJECT NUMBER

P14PX00877

UNIT | AREA

DRAWING SCALE

ENLARGE FOR FULL SCALE

SIGN CATEGORY

DESCRIPTION

STRUCTURE: QTY:

06/12/2015

REVISION DATE

1. 8/7/2015

2. 9/9/2015

3. 10/12/2015 4.

DRAWING NUMBER

National Park Service U.S. Department of the InteriorIMPORTANT NOTE: All steel components and hardware shall be heavy duty hot dipped galvanized for marine conditions.

1.0" 0.25" 0.625"

1.875" 0.5"

1.0" 0.36" 1.312"

1.594"

1.484"

0.188"

0.312" 1.0"

0.312"

5/8" 15/16"

1 9/16"

3/16"

11/32"

5/16"

11/32"

1"

1/8"

7/16"

1"

5/16"

1/8"

0.378" 7/8" diam.

plus draft3/16"

1/16"

1"

1/16"

7/16" diam.

7/16" x 11/16" Slotted Hole

Note: Centerline of hole for 3/8" diameter square head bolt x 2 1/4" long with a flat washer and hex nut. Bolt head dimensions shall be in accordance with ANSI B 18.2.1 as referred to in the AISC manual of steel construction. Bolt assembly shall be galvanized.

Beam flange of W shapes:

7/16" leg of clamp toward W shapes 15 lbs/ft. and greater

Beam flange of W and S shapes:

5/16" leg of clamp toward W and S shapes 12 lbs/ft. and less

Post clamp to be ASTM B26 or B108 cast Aluminum alloy 356.0-T6 (.173 lbs each)

Actual Size

Motorist Guidance

1-10.0C Post Clip Plan View

2-10.0C Post Clip Elevation

3-10.0C Alternative Post Clip Plan View

4-10.0C Alternative Post Clip Elevation 10.0C | CACO

6x8 Wood Posts (per local codes) Painted NPS Brown

Extruded Aluminum with Retro-

PROJECT NUMBER

P14PX00877

UNIT | AREA

DRAWING SCALE

ENLARGE FOR FULL SCALE

SIGN CATEGORY

DESCRIPTION

STRUCTURE: QTY:

06/12/2015

REVISION DATE

1. 8/7/2015

2. 9/9/2015

3. 10/12/2015 4.

DRAWING NUMBER

National Park Service U.S. Department of the InteriorIMPORTANT NOTE: All steel components and hardware shall be heavy duty hot dipped galvanized for marine conditions.

9" 2"

78"

18"

1/2” = 1’-0”

Motorist Guidance

2400%

11.0 | CACO

1-11.0 9x18 Single 2x2 Steel Post (Vehicular)

Sign Overview & Mounting Heights

Single 2x2 Steel Post (per local codes). 1

VIS 9/18 - 0.080 Aluminum Panel with Painted NPS Brown Back, 3/8” Radius Corners and Mounting Holes.

1Panel to be low intensity retro-reflective.

PROJECT NUMBER

P14PX00877

UNIT | AREA

DRAWING SCALE

ENLARGE FOR FULL SCALE

SIGN CATEGORY

DESCRIPTION

QTY:

QTY:

06/12/2015

REVISION DATE

1. 8/7/2015

2. 9/9/2015

3. 10/12/2015 4.

DRAWING NUMBER

National Park Service U.S. Department of the InteriorIMPORTANT NOTE: All steel components and hardware shall be heavy duty hot dipped galvanized for marine conditions.

Painted Back NPS Brown Matthews Paint

MP63848

PMS 485

Parking Lot Regulations

PMS 341

Bus/Reserved/Timed Parking

PMS 187

No Parking

PMS 301

Accessible

5/16” Mounting Hole

,080 Aluminum with 3/8” Radius Corners

(Typical)

Panel Back:

Painted to Match NPS Brown, Matthews Paint MP63848 (or equivalent)

Panel Front:

Low Intensity Retro-reflective Vinyl With compute cut graphics eq eq

9"

3/

4" 1'

-0

/4

1/

2"

1' -6

3” = 1’-0”

Motorist Guidance

400%

11.0A | CACO

1-11.0A Panel Fabrication Front Elevation

2-11.0A Panel Colors

STRUCTURE:

Single 2x2 Steel Post (per local codes).

VIS 9/18 - 0.080 Aluminum Panel with Painted NPS Brown Back, 3/8” Radius Corners and Mounting Holes. Panel to be low intensity retro-re lective. 1

PROJECT NUMBER

P14PX00877

UNIT | AREA

DRAWING SCALE

ENLARGE FOR FULL SCALE

SIGN CATEGORY

DESCRIPTION

STRUCTURE: QTY:

06/12/2015

REVISION DATE

1. 8/7/2015

2. 9/9/2015

3. 10/12/2015 4.

DRAWING NUMBER

National Park Service U.S. Department of the InteriorIMPORTANT NOTE: All steel components and hardware shall be heavy duty hot dipped galvanized for marine conditions.

2x2 Steel Post heavy duty hot dipped galvanized for marine conditions

3 3/4" 1 1/2”

Aluminum Sign Panel

1/4"-20 x 3" Long Galvanized Steel

Carriage Bolt with Washer and Nut

1”

GL

2x2 Steel Post heavy duty hot dipped galvanized for marine conditions

Breakaway or Frangible Coupling as Required by

State and Local Codes Detail BR.0

Footer Engineering and Depth as Required for

Structural Integrity and Per State and Local Codes

2-11.0B

78”

See Drawing

Motorist Guidance

11.0B | CACO

1-11.0B NPS Standard Aluminum - Sign Elevations

Scale: 1/2” = 1’-0” Front & Side Elevations

2-11.0B Panel Post Attachment Detail

Scale: 3” - 1’-0”

Single 2x2 Steel Post (per local codes). 1

VIS 9/18 - 0.080 Aluminum Panel with Painted NPS Brown Back, 3/8” Radius Corners and Mounting Holes.

1Panel to be low intensity retro-reflective.

lhthomas Highlight

PROJECT NUMBER

P14PX00877

UNIT | AREA

DRAWING SCALE

ENLARGE FOR FULL SCALE

SIGN CATEGORY

DESCRIPTION

STRUCTURE: QTY:

06/12/2015

REVISION DATE

1. 8/7/2015

2. 9/9/2015

3. 10/12/2015 4.

DRAWING NUMBER

National Park Service U.S. Department of the InteriorIMPORTANT NOTE: All steel components and hardware shall be heavy duty hot dipped galvanized for marine conditions.

2"

78"

12"

24"

1/2” = 1’-0”

Motorist Guidance

2400%

12.0 | CACO

1-12.0 12x24 Single 2x2 Steel Post (Vehicular)

Sign Overview & Mounting Heights

Single 2x2 Steel Post (per local codes). 1

VIS 12/24 - 0.080 Aluminum Panel with Painted NPS Brown Back, 3/8” Radius Corners and Mounting Holes.

Panel to be low intensity retro-

PROJECT NUMBER

P14PX00877

UNIT | AREA

DRAWING SCALE

ENLARGE FOR FULL SCALE

SIGN CATEGORY

DESCRIPTION

STRUCTURE: QTY:

06/12/2015

REVISION DATE

1. 8/7/2015

2. 9/9/2015

3. 10/12/2015 4.

DRAWING NUMBER

National Park Service U.S. Department of the InteriorIMPORTANT NOTE: All steel components and hardware shall be heavy duty hot dipped galvanized for marine conditions.

Painted Back NPS Brown Matthews Paint

MP63848

PMS 485

Road Regulations

Panel Front:

low intensity retro-reflective vinyl with compute cut graphics.

5/16” Mounting Hole (Typical)

.080 Aluminum with 3/8” Radius Corners

Panel Back:

Painted to Match NPS Brown, Matthews Paint MP63848 (or equivalent) eq eq

1'-0" 2'

-0

6" 1'

-4

/8

3/

8"

3” = 1’-0”

Motorist Guidance

400%

12.0A | CACO1-12.0A Panel Fabrication

Front Elevation

2-12.0A Panel Colors

Single 2x2 Steel Post (per local codes). 1

VIS 12/24 - 0.080 Aluminum Panel with Painted NPS Brown Back, 3/8” Radius Corners and Mounting Holes.

Panel to be low intensity retro-

PROJECT NUMBER

P14PX00877

UNIT | AREA

DRAWING SCALE

ENLARGE FOR FULL SCALE

SIGN CATEGORY

DESCRIPTION

STRUCTURE: QTY:

QTY:

06/12/2015

REVISION DATE

1. 8/7/2015

2. 9/9/2015

3. 10/12/2015 4.

DRAWING NUMBER

National Park Service U.S. Department of the InteriorIMPORTANT NOTE: All steel components and hardware shall be heavy duty hot dipped galvanized for marine conditions.

2x2 Steel Post heavy duty hot dipped galvanized for marine conditions

Aluminum Sign Panel

1/4"-20 x 3" Long Galvanized Steel

Carriage Bolt with Washer and Nut

1”

GL

2x2 Steel Post heavy duty hot dipped galvanized for marine conditions

Breakaway or Frangible Coupling as Required by

State and Local Codes Detail BR.0

Footer Engineering and Depth as Required for

Structural Integrity and Per State and Local Codes

2-12.0B

6" 1 3/8"

See Drawing

Motorist Guidance

12.0B | CACO

1-12.0B NPS Standard Aluminum - Sign Elevations Scale: 1/2” = 1’-0” Front & Side Elevations

2-12.0B Panel Post Attachment Detail Scale: 3” - 1’-0”

Single 2x2 Steel Post (per local codes). 1

VIS 12/24 - 0.080 Aluminum Panel with Painted NPS Brown Back, 3/8” Radius Corners and Mounting Holes. 1

78" lhthomas Highlight

PROJECT NUMBER

P14PX00877

UNIT | AREA

DRAWING SCALE

ENLARGE FOR FULL SCALE

SIGN CATEGORY

DESCRIPTION

STRUCTURE: QTY:

06/12/2015

REVISION DATE

1. 8/7/2015

2. 9/9/2015

3. 10/12/2015 4.

DRAWING NUMBER

National Park Service U.S. Department of the InteriorIMPORTANT NOTE: All steel components and hardware shall be heavy duty hot dipped galvanized for marine conditions.

SLOW DOWN

FOR WILDLIFE

2'-0"

2'-0"

60" – 78" D ep en d in g o n

Sig h t Lin es an d

Lo cal C o n d itio n s

4"

1/2” = 1’-0”

Motorist Guidance

2400%

13.0 | CACO

1-13.0 24x24 Single 4x4 Wood Post (Vehicular)

Sign Overview & Mounting Heights

Single 4x4 Wood Post (per local codes).

Painted NPS Brown. 1

VIS 24/24 - 0.125 Aluminum Panel with Painted NPS Brown Back, 3/8” Radius Corners and Mounting Holes.

Panel to be low intensity retro-reflective.

lhthomas Highlight

PROJECT NUMBER

P14PX00877

UNIT | AREA

DRAWING SCALE

ENLARGE FOR FULL SCALE

SIGN CATEGORY

DESCRIPTION

STRUCTURE: QTY:

06/12/2015

REVISION DATE

1. 8/7/2015

2. 9/9/2015

3. 10/12/2015 4.

DRAWING NUMBER

National Park Service U.S. Department of the InteriorIMPORTANT NOTE: All steel components and hardware shall be heavy duty hot dipped galvanized for marine conditions.

Painted Back NPS Brown Matthews Paint

MP63848

PMS 124

Caution

Panel Front:

Low Intensity Retro-reflective Vinyl with computer cut graphics

5/16” Mounting Hole (Typical)

.080 Aluminum with 3/8” Radius Corners

Panel Back:

Painted to Match NPS Brown, Matthews Paint MP63848 (or equivalent)

2'-0" (typ) eq eq

4" ty p

3” = 1’-0”

Motorist Guidance

400%

13.0A | CACO1-13.0A Panel Fabrication

Front Elevation

2-13.0A Panel Colors

Single 4x4 Wood Post (per local codes) Painted NPS Brown 1

VIS 24/24 - 0.080 Aluminum Panel with Painted NPS Brown Back, 3/8” Radius Corners and Mounting Holes.

PROJECT NUMBER

P14PX00877

UNIT | AREA

DRAWING SCALE

ENLARGE FOR FULL SCALE

SIGN CATEGORY

DESCRIPTION

STRUCTURE: QTY:

06/12/2015

REVISION DATE

1. 8/7/2015

2. 9/9/2015

3. 10/12/2015 4.

DRAWING NUMBER

National Park Service U.S. Department of the InteriorIMPORTANT NOTE: All steel components and hardware shall be heavy duty hot dipped galvanized for marine conditions.

to

4” 4”

Aluminum Sign Panel

1/4"-20 x 5" Long Galvanized Steel

Carriage Bolt with Washer and Nut

4x4 Breakaway Timber Post Painted

Match NPS Brown, Matthews Paint

MP63848

2 1/2"

GL

D ep en d in g o n S ig h t Li n es a n d L o ca l C o n d it io n s

4x4 Wood Posts Painted to Match NPS Brown, Matthews Paint MP63848

Breakaway or Frangible Coupling as Required by

State and Local Codes Detail BR.0

Footer Engineering and Depth as Required for

Structural Integrity and Per State and Local Codes

2-13.0B

See Drawing

Motorist Guidance

13.0B | CACO

1-13.0B NPS Standard Aluminum - Sign Elevations

Scale: 3/8” = 1’-0” Front & Side Elevations

2-13.0B Panel Post Attachment Detail

Scale: 3” - 1’-0”

Single 4x4 Wood Post (per local codes) Painted NPS Brown 1

VIS 24/24 - 0.080 Aluminum Panel with Painted NPS Brown Back, 3/8” Radius Corners and Mounting Holes.

Panel to be low intensity retro-reflective.

lhthomas Highlight lhthomas Highlight

PROJECT NUMBER

P14PX00877

UNIT | AREA

DRAWING SCALE

ENLARGE FOR FULL SCALE

SIGN CATEGORY

DESCRIPTION

STRUCTURE: QTY:

06/12/2015

REVISION DATE

1. 8/7/2015

2. 9/9/2015

3. 10/12/2015 4.

DRAWING NUMBER

National Park Service U.S. Department of the InteriorIMPORTANT NOTE: All steel components and hardware shall be heavy duty hot dipped galvanized for marine conditions.

2'-0"

2'-0"

4"

4'-0"

1/2” = 1’-0”

VIS

2400%

14.0 | CACO

1-14.0 24x24 Single 4x4 Wood Post (Bike)

Sign Overview & Mounting Heights

Single 4x4 Wood Post (per local codes).

Painted NPS Brown. 1

VIS 24/24 - 0.080 Aluminum Panel with Painted NPS Brown Back, 3/8” Radius Corners and Mounting Holes.

PROJECT NUMBER

P14PX00877

UNIT | AREA

DRAWING SCALE

ENLARGE FOR FULL SCALE

SIGN CATEGORY

DESCRIPTION

STRUCTURE: QTY:

06/12/2015

REVISION DATE

1. 8/7/2015

2. 9/9/2015

3. 10/12/2015 4.

DRAWING NUMBER

National Park Service U.S. Department of the InteriorIMPORTANT NOTE: All steel components and hardware shall be heavy duty hot dipped galvanized for marine conditions.

Painted Back NPS Brown Matthews Paint

MP63848

PMS 124

Caution

Panel Front:

Low Intensity Retro-reflective Vinyl with computer cut graphics

5/16” Mounting Hole (Typical)

.080 Aluminum with 3/8” Radius Corners

Panel Back:

Painted to Match NPS Brown, Matthews Paint MP63848 (or equivalent)

2'-0" (typ) eq eq

4" ty p

3” = 1’-0”

VIS

400%

14.0A | CACO1-14.0A Panel Fabrication

Front Elevation

2-13.0A Panel Colors

Single 4x4 Wood Post (per local codes) Painted NPS Brown 1

VIS 24/24 - 0.080 Aluminum Panel with Painted NPS Brown Back, 3/8” Radius Corners and Mounting Holes.

PROJECT NUMBER

P14PX00877

UNIT | AREA

DRAWING SCALE

ENLARGE FOR FULL SCALE

SIGN CATEGORY

DESCRIPTION

STRUCTURE: QTY:

06/12/2015

REVISION DATE

1. 8/7/2015

2. 9/9/2015

3. 10/12/2015 4.

DRAWING NUMBER

National Park Service U.S. Department of the InteriorIMPORTANT NOTE: All steel components and hardware shall be heavy duty hot dipped galvanized for marine conditions.

Aluminum Sign Panel

1/4"-20 x 5" Long Galvanized Steel

Carriage Bolt with Washer and Nut

4x4 Breakaway Timber Post Painted to Match NPS Brown, Matthews Paint

MP63848

GL

4’ -0

4x4 Wood Posts Painted to Match NPS Brown, Matthews Paint MP63848

Breakaway or Frangible Coupling as Required by

State and Local Codes Detail BR.0

Footer Engineering and Depth as Required for

Structural Integrity and Per State and Local Codes

2-14.0B

4” 4”

2 1/2"

See Drawing

VIS

14.0B | CACO

1-14.0B NPS Standard Aluminum - Sign Elevations

Scale: 3/8” = 1’-0” Front & Side Elevations

2-14.0B Panel Post Attachment Detail

Scale: 3” - 1’-0”

Single 4x4 Wood Post (per local codes) Painted NPS Brown 1

VIS 24/24 - 0.080 Aluminum Panel with Painted NPS Brown Back, 3/8” Radius Corners and Mounting Holes.

Panel to be low intensity retro-reflective.

lhthomas Highlight

PROJECT NUMBER

P14PX00877

UNIT | AREA

DRAWING SCALE

ENLARGE FOR FULL SCALE

SIGN CATEGORY

DESCRIPTION

STRUCTURE: QTY:

06/12/2015

REVISION DATE

1. 8/7/2015

2. 9/9/2015

3. 10/12/2015 4.

DRAWING NUMBER

National Park Service U.S. Department of the InteriorIMPORTANT NOTE: All steel components and hardware shall be heavy duty hot dipped galvanized for marine conditions.

1'-6"

1'-10 1/4"

4"

4'-0"

1/2” = 1’-0”

VIS

2400%

15.0 | CACO

1-15.0 18x22.25 Single 4x4 Wood Post (Bike)

Sign Overview & Mounting Heights

Single 4x4 Wood Post (per local codes) Painted NPS Brown 1

VIS 18/22.25 - 0.080 Aluminum Panel with Painted NPS Brown Back, 3/8” Radius Corners and Mounting Holes.

PROJECT NUMBER

P14PX00877

UNIT | AREA

DRAWING SCALE

ENLARGE FOR FULL SCALE

SIGN CATEGORY

DESCRIPTION

STRUCTURE: QTY:

06/12/2015

REVISION DATE

1. 8/7/2015

2. 9/9/2015

3. 10/12/2015 4.

DRAWING NUMBER

National Park Service U.S. Department of the InteriorIMPORTANT NOTE: All steel components and hardware shall be heavy duty hot dipped galvanized for marine conditions.

Painted Back NPS Brown Matthews Paint

MP63848

5/16” Mounting Hole (Typical)

.080 Aluminum with 3/8” Radius Corners

Panel Back:

Painted to Match NPS Brown, Matthews Paint MP63848 (or equivalent)

Panel Front:

Low Intensity Retro-reflective Vinyl with computer cut graphics eq eq

1'-6"

1' -1

1/

4"

3" 1'

-4

/4

3"

3” = 1’-0”

VIS

400%

15.0A | CACO1-15.0A Panel Fabrication

Front Elevation

2-15.0A Panel Colors

Single 4x4 Wood Post (per local codes) Painted NPS Brown 1

VIS 18/22.25 - 0.080 Aluminum Panel with Painted NPS Brown Back, 3/8” Radius Corners and Mounting Holes.

PROJECT NUMBER

P14PX00877

UNIT | AREA

DRAWING SCALE

ENLARGE FOR FULL SCALE

SIGN CATEGORY

DESCRIPTION

STRUCTURE: QTY:

06/12/2015

REVISION DATE

1. 8/7/2015

2. 9/9/2015

3. 10/12/2015 4.

DRAWING NUMBER

National Park Service U.S. Department of the InteriorIMPORTANT NOTE: All steel components and hardware shall be heavy duty hot dipped galvanized for marine conditions.

3” 3”

Aluminum Sign Panel

1/4"-20 x 5" Long Galvanized Steel

Carriage Bolt with Washer and Nut

4x4 Breakaway Timber Post Painted

Match NPS Brown, Matthews Paint

MP63848

1”

GL

4’ -0

4x4 Wood Posts Painted to Match NPS Brown, Matthews Paint MP63848

Breakaway or Frangible Coupling as Required by

State and Local Codes Detail BR.0

Footer Engineering and Depth as Required for

Structural Integrity and Per State and Local Codes

2-15.0B to

See Drawing

VIS

15.0B | CACO

1-15.0B NPS Standard Aluminum - Sign Elevations

Scale: 3/8” = 1’-0” Front & Side Elevations

2-15.0B Panel Post Attachment Detail

Scale: 3” - 1’-0”

Single 4x4 Wood Post (per local codes) Painted NPS Brown 1

VIS 18/22.25 - 0.080 Aluminum Panel with Painted NPS Brown Back, 3/8” Radius Corners and Mounting Holes.

1Panel to be low intensity retro-reflective.

lhthomas Highlight

PROJECT NUMBER

P14PX00877

UNIT | AREA

DRAWING SCALE

ENLARGE FOR FULL SCALE

SIGN CATEGORY

DESCRIPTION

STRUCTURE: QTY:

06/12/2015

REVISION DATE

1. 8/7/2015

2. 9/9/2015

3. 10/12/2015 4.

DRAWING NUMBER

National Park Service U.S. Department of the InteriorIMPORTANT NOTE: All steel components and hardware shall be heavy duty hot dipped galvanized for marine conditions.

1' -6

1'-6" 4"

4'-0"

1/2” = 1’-0”

VIS

2400%

16.0 | CACO

1-16.0 18x18 Single 4x4 Wood Post (Bike)

Sign Overview & Mounting Heights

Single 4x4 Wood Post (per local codes) Painted NPS Brown 1

VIS 18/18 - 0.080 Aluminum Panel with Painted NPS Brown Back, and Mount-ing Holes. 1

PROJECT NUMBER

P14PX00877

UNIT | AREA

DRAWING SCALE

ENLARGE FOR FULL SCALE

SIGN CATEGORY

DESCRIPTION

STRUCTURE: QTY:

06/12/2015

REVISION DATE

1. 8/7/2015

2. 9/9/2015

3. 10/12/2015 4.

DRAWING NUMBER

National Park Service U.S. Department of the InteriorIMPORTANT NOTE: All steel components and hardware shall be heavy duty hot dipped galvanized for marine conditions.

PMS 1797

Stop

5/16” Mounting Hole (Typical)

.080 Aluminum

Panel Back:

Painted to Match NPS Brown, Matthews Paint MP63848 (or equivalent)

Panel Front:

Low Intensity Retro-reflective Vinyl with computer cut graphics eq eq

1'-6"

1' -6

3" 1'

-0

/8

3"

3” = 1’-0”

VIS

400%

16.0A | CACO

1-16.0A Panel Fabrication

Front Elevation

2-16.0A Panel Colors

Single 4x4 Wood Post (per local codes) Painted NPS Brown 1

VIS 18/18 - 0.080 Aluminum Panel with Painted NPS Brown Back, and Mount-ing Holes. 1

PROJECT NUMBER

P14PX00877

UNIT | AREA

DRAWING SCALE

ENLARGE FOR FULL SCALE

SIGN CATEGORY

DESCRIPTION

STRUCTURE: QTY:

06/12/2015

REVISION DATE

1. 8/7/2015

2. 9/9/2015

3. 10/12/2015 4.

DRAWING NUMBER

National Park Service U.S. Department of the InteriorIMPORTANT NOTE: All steel components and hardware shall be heavy duty hot dipped galvanized for marine conditions.

3” 3”

Aluminum Sign Panel

1/4"-20 x 5" Long Galvanized Steel

Carriage Bolt with Washer and Nut

4x4 Breakaway Timber Post Painted to Match NPS Brown, Matthews Paint

MP63848

1”

GL

4x4 Wood Posts Painted to Match NPS Brown, Matthews Paint MP63848

Breakaway or Frangible Coupling as Required by

State and Local Codes Detail BR.0

Footer Engineering and Depth as Required for

Structural Integrity and Per State and Local Codes

2-16.0B

4'-0"

See Drawing

VIS

16.0B | CACO

1-16.0B NPS Standard Aluminum - Sign Elevations

Scale: 3/8” = 1’-0” Front & Side Elevations

2-16.0B Panel Post Attachment Detail

Scale: 3” - 1’-0”

Single 4x4 Wood Post (per local codes) 1 Painted NPS Brown

VIS 18/18 - 0.080 Aluminum Panel with Painted NPS Brown Back, and Mount-ing Holes. 1

Panel to be low intensity retro-reflective.

lhthomas Highlight

PROJECT NUMBER

P14PX00877

UNIT | AREA

DRAWING SCALE

ENLARGE FOR FULL SCALE

SIGN CATEGORY

DESCRIPTION

STRUCTURE: QTY:

06/12/2015

REVISION DATE

1. 8/7/2015

2. 9/9/2015

3. 10/12/2015 4.

DRAWING NUMBER

National Park Service U.S. Department of the InteriorIMPORTANT NOTE: All steel components and hardware shall be heavy duty hot dipped galvanized for marine conditions.

2'-8"

2" 1'-0"

2'-0"

1/2” = 1’-0”

VIS

2400%

17.0 | CACO

1-17.0 12x24 Single 2x2 Steel Post (Pedestrian & Bikers)

Sign Overview & Mounting Heights

Single 2x2 Steel Post (per local codes). 1

QTY:

VIS 12/24 - 0.080 Aluminum Panel with Painted NPS Brown Back, 3/8” Radius Corners and Mounting Holes.

Panel to be low intensity retro-reflective OR Direct imaged or image transfer as indicated in sign drawings.

PROJECT NUMBER

P14PX00877

UNIT | AREA

DRAWING SCALE

ENLARGE FOR FULL SCALE

SIGN CATEGORY

DESCRIPTION

STRUCTURE: QTY:

06/12/2015

REVISION DATE

1. 8/7/2015

2. 9/9/2015

3. 10/12/2015 4.

DRAWING NUMBER

National Park Service U.S. Department of the InteriorIMPORTANT NOTE: All steel components and hardware shall be heavy duty hot dipped galvanized for marine conditions.

PMS 124

Caution

5/16” Mounting Hole

.080 Aluminum with 3/8” Radius Corners

(Typical)

Panel Back:

Painted to Match NPS Brown, Matthews Paint MP63848 (or equivalent)

Panel Front imaging process as indicated in sign drawings:

Low Intensity Retro-reflective Vinyl with computer cut graphics

OR

Direct imaged or image transfer to aluminum. Matte finish clear topcoat. UV resistant. Exterior Grade.

Vinyl wrap not acceptable.

eq eq

1'-0"

2' -0

3" 1'

-6

3"

3” = 1’-0”

VIS

400%

17.0A | CACO

1-17.0A Panel Fabrication

Front Elevation

2-17.0A Panel Colors

Single 2x2 Steel Post (per local codes). 1

VIS 12/24 - 0.080 Aluminum Panel with Painted NPS Brown Back, 3/8” Radius Corners and Mounting Holes.

Panel to be low intensity retro-reflective OR Direct imaged or image transfer as indicated in sign drawings.

Painted Back NPS Brown Matthews Paint

MP63848

PMS 485

Prohibition Symbols

PROJECT NUMBER

P14PX00877

UNIT | AREA

DRAWING SCALE

ENLARGE FOR FULL SCALE

SIGN CATEGORY

DESCRIPTION

STRUCTURE: QTY:

06/12/2015

REVISION DATE

1. 8/7/2015

2. 9/9/2015

3. 10/12/2015 4.

DRAWING NUMBER

National Park Service U.S. Department of the InteriorIMPORTANT NOTE: All steel components and hardware shall be heavy duty hot dipped galvanized for marine conditions.

2x2 Steel Post heavy duty hot dipped galvanized for marine conditions

Aluminum Sign Panel

1/4"-20 x 3" Long Galvanized Steel

Carriage Bolt with Washer and Nut

GL

Breakaway or Frangible Coupling as Required by

State and Local Codes

Footer Engineering and Depth as Required for

Structural Integrity and Per State and Local Codes

2-17.0B

2x2 Steel Post heavy duty hot dipped galvanized for marine conditions 2'-8"

1"

3" 3"

See Drawing

VIS

17.0B | CACO

1-17.0B NPS Standard Aluminum - Sign Elevations

Scale: 3/8” = 1’-0” Front & Side Elevations

2-17.0B Panel Post Attachment Detail

Scale: 3” - 1’-0”

Single 2x2 Steel Post (per local codes). 1

QTY:

VIS 12/24 - 0.080 Aluminum Panel with Painted NPS Brown Back, 3/8” Radius Corners and Mounting Holes.

Panel to be low intensity retro-reflective OR Direct imaged or image transfer as indicated in sign drawings.

lhthomas Highlight

PROJECT NUMBER

P14PX00877

UNIT | AREA

DRAWING SCALE

ENLARGE FOR FULL SCALE

SIGN CATEGORY

DESCRIPTION

STRUCTURE: QTY:

06/12/2015

REVISION DATE

1. 8/7/2015

2. 9/9/2015

3. 10/12/2015 4.

DRAWING NUMBER

National Park Service U.S. Department of the InteriorIMPORTANT NOTE: All steel components and hardware shall be heavy duty hot dipped galvanized for marine conditions.

1'-6"

V aries

4"

2'-8"

1/2” = 1’-0”

VIS

2400%

18.0 | CACO

1-18.0 18 Single 4x4 Wood Post (Trail)

Sign Overview & Mounting Heights

Single 4x4 Wood Post (per local codes) Painted NPS Brown 1

VIS 18/Varies - 0.080 Aluminum Panel with Painted NPS Brown Back, 3/8” Radius Corners and Mounting Holes.

Per NPS Standard. 1

PROJECT NUMBER

P14PX00877

UNIT | AREA

DRAWING SCALE

ENLARGE FOR FULL SCALE

SIGN CATEGORY

DESCRIPTION

STRUCTURE: QTY:

06/12/2015

REVISION DATE

1. 8/7/2015

2. 9/9/2015

3. 10/12/2015 4.

DRAWING NUMBER

National Park Service U.S. Department of the InteriorIMPORTANT NOTE: All steel components and hardware shall be heavy duty hot dipped galvanized for marine conditions.

5/16” Mounting Hole (Typical)

.080 Aluminum with 3/8” Radius Corners

Panel Back:

Painted to Match NPS Brown, Matthews Paint MP63848 (or equivalent)

Panel Front:

Direct imaged or image transfer to aluminum. Matte finish clear topcoat. UV resistant. Exterior Grade.

Vinyl wrap not acceptable.

eq eq

V ar ie s

3" V ar ie s 3"

1'-6"

White Text

PMS 1615

Background

Black Overbar

3” = 1’-0”

VIS

400%

18.0A | CACO

1-18.0A Panel Fabrication

Front Elevation

2-18.0A Panel Colors

Single 4x4 Wood Post (per local codes) Painted NPS Brown 1

VIS 18/Varies - 0.080 Aluminum Panel with Painted NPS Brown Back, 3/8”

PROJECT NUMBER

P14PX00877

UNIT | AREA

DRAWING SCALE

ENLARGE FOR FULL SCALE

SIGN CATEGORY

DESCRIPTION

STRUCTURE: QTY:

06/12/2015

REVISION DATE

1. 8/7/2015

2. 9/9/2015

3. 10/12/2015 4.

DRAWING NUMBER

National Park Service U.S. Department of the InteriorIMPORTANT NOTE: All steel components and hardware shall be heavy duty hot dipped galvanized for marine conditions.

3” 3”

Aluminum Sign Panel

1/4"-20 x 5" Long Galvanized Steel

Carriage Bolt with Washer and Nut

4x4 Timber Post Painted to Match NPS Brown, Matthews Paint

MP63848

1”

GL

4x4 Wood Posts Painted to Match NPS Brown, Matthews Paint MP63848

Footer Engineering and Depth as Required for

Structural Integrity and Per State and Local Codes

2-18.0B

2'-8"

See Drawing

VIS

18.0B | CACO

1-18.0B NPS Standard Aluminum - Sign Elevations

Scale: 3/8” = 1’-0” Front & Side Elevations

2-18.0B Panel Post Attachment Detail

Scale: 3” - 1’-0”

Single 4x4 Wood Post (per local codes) Painted NPS Brown 1

VIS 18/Varies - 0.080 Aluminum Panel with Painted NPS Brown Back, 3/8” Radius Corners and Mounting Holes.

Per NPS Standard. 1

PROJECT NUMBER

P14PX00877

UNIT | AREA

DRAWING SCALE

ENLARGE FOR FULL SCALE

SIGN CATEGORY

DESCRIPTION

STRUCTURE: QTY:

06/12/2015

REVISION DATE

1. 8/7/2015

2. 9/9/2015

3. 10/12/2015 4.

DRAWING NUMBER

National Park Service U.S. Department of the InteriorIMPORTANT NOTE: All steel components and hardware shall be heavy duty hot dipped galvanized for marine conditions.

4"

6'-0"

1'-6"

V aries

1/2” = 1’-0”

VIS

2400%

19.0 | CACO

1-19.0 18 Single 4x4 Wood Post (Pedestrian)

Sign Overview & Mounting Heights

Single 4x4 Wood Post (per local codes) Painted NPS Brown 1

VIS 18/Varies - 0.080 Aluminum Panel with Painted NPS Brown Back, 3/8”

PROJECT NUMBER

P14PX00877

UNIT | AREA

DRAWING SCALE

ENLARGE FOR FULL SCALE

SIGN CATEGORY

DESCRIPTION

STRUCTURE: QTY:

06/12/2015

REVISION DATE

1. 8/7/2015

2. 9/9/2015

3. 10/12/2015 4.

DRAWING NUMBER

National Park Service U.S. Department of the InteriorIMPORTANT NOTE: All steel components and hardware shall be heavy duty hot dipped galvanized for marine conditions.

5/16” Mounting Hole (Typical)

.080 Aluminum with 3/8” Radius Corners

Panel Back:

Painted to Match NPS Brown, Matthews Paint MP63848 (or equivalent)

Panel Front:

Direct imaged or image transfer to aluminum. Matte finish clear topcoat. UV resistant. Exterior Grade.

Vinyl wrap not acceptable.

eq eq

V ar ie s

3" V ar ie s 3"

1'-6"

White Text

PMS 1615

Background

Black Overbar

3” = 1’-0”

VIS

400%

19.0A | CACO

1-19.0A Panel Fabrication

Front Elevation

2-19.0A Panel Colors

Single 4x4 Wood Post (per local codes) Painted NPS Brown 1

VIS 18/Varies - 0.080 Aluminum Panel with Painted NPS Brown Back, 3/8”

PROJECT NUMBER

P14PX00877

UNIT | AREA

DRAWING SCALE

ENLARGE FOR FULL SCALE

SIGN CATEGORY

DESCRIPTION

STRUCTURE: QTY:

06/12/2015

REVISION DATE

1. 8/7/2015

2. 9/9/2015

3. 10/12/2015 4.

DRAWING NUMBER

National Park Service U.S. Department of the InteriorIMPORTANT NOTE: All steel components and hardware shall be heavy duty hot dipped galvanized for marine conditions.

3” 3”

Aluminum Sign Panel

1/4"-20 x 5" Long Galvanized Steel

Carriage Bolt with Washer and Nut

4x4 Timber Post Painted to Match NPS Brown, Matthews Paint

MP63848

1”

GL

4x4 Wood Posts Painted to Match NPS Brown, Matthews Paint MP63848

Footer Engineering and Depth as Required for

Structural Integrity and Per State and Local Codes

2-19.0B

6'-0"

See Drawing

VIS

19.0B | CACO

1-19.0B NPS Standard Aluminum - Sign Elevations

Scale: 3/8” = 1’-0” Front & Side Elevations

2-19.0B Panel Post Attachment Detail

Scale: 3” - 1’-0”

Single 4x4 Wood Post (per local codes) Painted NPS Brown 1

VIS 18/Varies - 0.080 Aluminum Panel with Painted NPS Brown Back, 3/8” Radius Corners and…