Attachment 2 - Specifications.pdf
PDF 87 KB Posted
- Attached to
- BEAST CAMSS Tent Replacement Covers Reaper Federal contract opportunity
- Solicitation number
- F2MTBG1137AW01
About this file
This pre-solicitation notice outlines requirements for replacement covers and solarflies for CAMSS 20EX40 tents. The Air Force seeks item 1) CAMSS20EX40 cover/end panels and liners according to specified part numbers and fabric specifications, and item 2) 20EX40 solarflies in tan color according to the stated specifications. Responses are due by August 11, 2021 at 12:00pm CST and should include specifications and capability statements for the requested items. The agency is the Air Force Air Education and Training Command.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Attachment 1 - SOO_Final_Redacted.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
*This submission contains data proprietary and confidential to California Industrial Facilities Resources, Inc. Such data shall not be disclosed outside of the US Government or duplicated, used, or disclosed, in whole or in part, for any purpose other than for US Government review.
ITEM 0001:
CAMSS20EX40 COVER/END PANELS
P/N: CAMSS2040PF-JBSA
• 15 + oz./sq. yd. Mil-Spec 44103D fabric
• Boot connectors over entries can be used to connect to other shelters or vestibules
• Two (2) sets of two (2) 18” ECU ports with a cable port
• Total of ten (10) mesh windows with wind resistant blackout covers (cover and end panel)
• Can connect multiple shelters end to end with integrated connector flap
• Built in infrared (IR) blocking
• Fabric includes UV inhibitors and is mold and rot resistant
• Fire resistant fabric that meets NFPA 701
• Cover and ends are radio frequency welded
• Each end panel includes mesh attic vent with cover
• Includes part number HIT-2040EX-PCT02, HIT-2040EX-PEHD01A, and HIT-PSW01.
No other part numbers other than listed part numbers.
CAMSS20EX40 LINER
P/N: CAMSS2040HH-JBSA
• Minimum 8 oz./sq. yd. Mil-Spec fabric
• Liner is flame resistant per test method ASTM D6413 o After flame – 2 seconds max o Char length – 6” max
• Air sock runs the length of the shelter and has spot cooling
• Includes part numbers HIT-20EX-HAT01, HIT-20EX40-HLM03, HIT-20EX40-LCF01, HIT-20EX-HLER01, HIT-20EX-HLEL01, HIT-20EX-HLS01, HIT-20EX-HLSL01, HIT-
20EX-HLSR01, HIT-20EX-LMM, HIT-20EX40-AAS01, and HIT-20EX40-AAE01.
No other part numbers other than listed part numbers.
ITEM 0002: 20EX40 SOLARFLY
P/N: CAMSS-20EX40-SF02-T (Tan)
• Withstands 55 MPH sustained winds with 65 MPH wind gust
• SolarFly to not increase shelter footprint
• No frame component of SolarFly required to anchor to ground
• Aluminum support stands are collapsible for low cube transportation
• Mesh meets ASTM D6413 for flame resistance
• Cover is radio frequency welded for strength and durability
• SolarFly designed and verified to fit CAMSS 20EX40 Shelter
• SolarFly designed to install on existing CAMSS 20EX40 Shelter without disassembly of shelter or use of mechanical equipment
• SolarFly fabric shall be supported every 8′ by aluminum frame that is supported by
CAMSS 20EX40 Shelter frame to reduce maintenance over time
• Fly, stands, rods, ropes and spikes weigh 275 lbs.
• Color is item color designated above, which matches shelter color
File details come from the government source that posted it. Updated .