Attachment 2 - Salient Characteristics.pdf

RFQ 192122VWA0000004

Attachment 2- Salient Characteristics

Salient Characteristics

1. CLIN 0001 (Part Number# 3-100193 / MFG: Viken Detection Corporation) Handheld Backscatter Devices Nighthawk XP (Quantity: 2 each) (Brand name or equal)

The Handheld Backscatter Devices shall at the minimum meet the following salient characteristics:

1. The Handheld X-ray Device shall at the minimum have safety interlocks, built-in digital camera, and built-in flashlight.

2. The Handheld X-ray Device shall at the minimum can scan up to 10,000 images.

3. The Handheld X-ray Device shall at the minimum can scan up to a square foot (30 by 30

cm) per second and see high-contrast backscatter x-ray images of concealed threats — in vehicle fenders, doors, bumpers, exhaust manifolds, dashboards, seats and tires.

4. The Handheld X-ray Device shall at the minimum shall have an integrated touch screen interface, resulting in single user operation and inspection without additional brackets and communication cables.

5. The Handheld X-ray Device shall at the minimum be a single integrated system. The unit at the minimum shall incorporate the scanner and display into one unit as the confined spaces on vessels often only permit one operator to enter and conduct any examinations.

Units with separate displays pose the risk of droppage/damage/loss as this unit will be used in seaport/inclement weather environments.

6. The Handheld X-ray Device shall at the minimum be portable and lightweight (<9 lbs.)

2. CLIN 0002 (Part Number# 3-100192 / MFG: Viken Detection Corporation) (Configurations) 140 KeV Source (Quantity: 2 each) (Brand name or equal)

140 KeV Source shall meet the following salient characteristics at the minimum:

1. The Device shall at the minimum be able to image threats through 3.0mm steel thickness. Due to different ways contraband is carried. (IE, backpack, container, car, boat, safe...).

3. CLIN 0003 (Part Number# 3-100220 / MFR: Viken Detection Corporation) (Configurations) Wide Area Detector with Lead Identification (Quantity: 2 each) (Brand Name or Equal)

The Wide Area Detector with Lead identification shall meet the following salient characteristics at the minimum:

1. The Ability to Scan about 6 by 8 inches (15 by 20 cm) at one time within minutes.

Ability to scan small or large objects and see what’s inside immediately. This is needed in order to assist in immediate assessment of a seizure of goods.