Attachment 2 - Salient Characteristics and Minimum Specifications.pdf

Government Minimum Requirements Solicitation #: N6660423Q0264

0001: Compute Node Hardware; QTY 12:

• All hardware must be delivered by Sept 1, 2023

• 7x24 Next Business Day Onsite Service, 5 Years

• Standard 5-Year Disk Retention

• Sliding Tray in front of chassis for easy system identification to include system serial number

• Modular, removable and tool less architecture for easy access

• Support for embedded NIC (Network Interface Card) to support up to 4x10GbE or 2x25GbE

• Quad Port 10/25Gb Direct Attach/SFP+ Network Adapter- Full line rate must equal 10GbE over each port

• Systems management controller for early notification to prevent server failures and secure access to remote servers

• Minimum 8X DVD ROM USB external

• On board FIPS Compliant TPM2.0 V3 (Trusted Platform Module)

• Cryptographically signed firmware

• Available USB 3.0 port on front of chassis

• Minimum 2x USB 3.0 or higher ports on rear of chassis

• Minimum 2x VGA port interfaces one on both front and back of chassis

• VGA resolution to support including 1920x1200

• System must have either a front or rear serial port

• Fixed and hot swappable drive support for SAS, SATA or NVMe

• Minimum 8GB RAID Controller Card, SAS 3.0, PCI-e Gen4 with NV Cache

• Compact 2u Form factor with slide rail mounting hardware

• Support for Red Hat Enterprise Linux

• CPU- Dual Thirty Eight Core Intel XEON Platinum 8368 2.4GHz 57MB Cache 270W

• Support for up to 8 PCI-e Gen4

• Support for up to 2 double-width or 4 single-width GPU accelerators

• Include quantity (1) NVIDIA Ampere A100 40GB, Double Wide, Full Height GPU per system

• Support for up to 12 TB system memory (dual socket). Including ECC memory including mixed memory support for RDIMM & LRDIMM at DDR4

• Front drive support for up to 24 2.5” hard drives or 24 NVMe drives

• Minimum dual redundant power supplies capable of auto sensing and auto switching 1100W or greater

• Minimum dual hot-plug redundant fans for system cooling

• Quantity 2 - C19/C20 power cords 2.5 meter

• Energy efficient 80% Power Supply or greater

• System firmware and drivers must be made available by the vendor via http or https and not solely FTP

• BIOS must support the ability to disable power button

• Ensure a secure component supply chain from factory to data center

• Minimum 1536GB DDR4-3200MT/s ECC RAM (64GBx24)

• 2 U form Factor

• Minimum quantity two 800GB 2.5” Solid State Drive 12Gpbs hot swappable for RAID 1 configuration

0002: Data Farm Compute Node Hardware; QTY 2:

• All hardware must be delivered by Sept 1, 2023

• 7x24 Next Business Day Onsite Service, 5 Years

• Standard 5-Year Disk Retention

• Sliding Tray in front of chassis for easy system identification to include system serial number

• Modular, removable and tool less architecture for easy access

• Support for embedded NIC (Network Interface Card) to support up to 4x10GbE or 2x25GbE

• Quad Port 10/25Gb Direct Attach/SFP+ Network Adapter- Full line rate must equal 10GbE over each port

• Quantity 1 - SFP+ to SFP+ 10/25GbE Copper Twinax direct attach cables 3 meter

• Systems management controller for early notification to prevent server failures and secure access to remote servers

• On board FIPS Compliant TPM2.0 V3(Trusted Platform Module)

• Cryptographically signed firmware

• Available USB 3.0 port on front of chassis

• Minimum 2x USB 3.0 or higher ports on rear of chassis

• Minimum 2x VGA port interfaces one on both front and back of chassis

• VGA resolution to support including 1920x1200

• System must have either a front or rear serial port

• Fixed and hot swappable drive support for SAS, SATA or NVMe

• Minimum 4GB RAID Controller Card, support for SAS,SATA, Solid-State drives Minimum PCI-e

Gen3.1 with support for RAID Levels 0,1,5 & 6 and data transfer rates up to 12Gb/s. RAID controller must also support load balancing, automatic rebuild, global hot spare with revertible hot spare

• RAID 1 Controller Card (to be used with the 2 – 480GB drives)

• Compact 1u Form factor with rail mounting hardware

• Support for Red Hat Enterprise Linux 7.x

• Quantity 2- CPU- Dual Sixteen Core Intel XEON Gold 6346 3.1GHz 36MB Cache 205W

• Support for 3 PCI-e Gen4 expansion slots

• Support for up to 3 single-width GPU accelerators

• Support for up to 10 TB memory including mixed memory support for RDIMM, LRDIMM & Intel

Optane Persistent memory modules

• Minimum internal drive support for up to 12 2.5” hard drives

• Minimum dual hot-plug redundant power supplies capable of auto sensing and auto switching 1400W or greater

• Minimum dual hot-plug redundant fans for system cooling

• Quantity 2 - C13/C14 power cords 2.5 meter

• Energy efficient 80% Power Supply or greater

• System firmware and drivers must be made available by the vendor via http or https and not solely FTP

• BIOS must support the ability to disable power button

• Ensure a secure component supply chain from factory to data center

• Minimum 512GB DDR4-3200MT/s ECC RAM (32GBx16)

• 1 U form Factor

• Quantity 2- 480GB 2.5” Solid State Drive Minimum speed 6Gpbs hot swappable for RAID 1 configuration.

• Quantity 10- 3.84TB 2.5” Solid State Drive Minimum speed 6Gpbs hot swappable for RAID 6 configuration.

0003: Power Distribution Unit; QTY 1:

• 3 Year Warranty minimum

• -2 year Warranty on battery

• Single phase use only

• Energy Star Compliant

• Capacity 10.0 KWatts/10kVA 208V UPS

• Input connectors: Hardwire 3-wire ( 2PH+ G)

• Output connectors: requirement are 6 power NEMA L6-30

• LCD graphics display

• Serial connectivity

• Temperature-compensated battery charging to increase battery life

• LED status indicators to also include frequency and current voltage

• Network manageable

• Automatic internal bypass

• Rack mountable 6U footprint

• Hot-swappable batteries

• Support for additional runtimes by adding battery capacity as necessary

• User-replaceable batteries

• Automatic self-test

• Scalable runtimes

• Audible alarms for immediate notification of UPS power conditions

• Firmware must be upgradeable

• Resettable circuit breaker to localize power overloads

• Support for environmental monitoring to include temperature & humidity

• Quantity (1) Extended runtime battery pack 192V 3u (should include a 2 year minimum warranty and be able to physically connect to the 10kVa UPS for extended aggregate runtimes)

0004: Metered Power Distribution Unit must include: (PR Item xx) QTY 4

• Metered Power Distribution Units (PDU) with LED display,

• Input connector type 30A National Electrical Manufacturer Association (NEMA) L6-30 connector

• Must support both C13 and C19 output connections for equipment

• 0U form factor

• Circuit protection to include circuit breaker

0005: Extended Power Distribution Unit must include: (PR Item xx) QTY 1

• Extended runtime battery pack 192V 3u

• Include a 2 year minimum warranty

• Physically connect to the 10kVa UPS (Line 2 (under software & accessories) for extended aggregate runtimes