Attachment 2 AM12984689 Drawings.pdf
PDF 181 KB Posted
- Attached to
- DDAA SPI SETS Federal contract opportunity
- Solicitation number
- SP330023Q0201
- Issued by
- Defense Logistics Agency Distribution
About this file
This document provides packaging instructions and drawings for a Mount, Telescope & Quadrant M187A1 to be procured under solicitation number SP330023Q0201 issued by the Defense Logistics Agency Distribution. The packaging instructions specify how the item is to be cleaned, preserved, wrapped, cushioned, bagged and containerized in accordance with various military standards to prevent damage during shipment and storage. Figures 1 and 2 depict the required cushioning configuration. The related solicitation seeks to procure this spare part for military optical devices but does not include pricing, response deadline or award date details.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Tab 11 - SP3300-23-Q-0201 P0001 Amendment.pdf | ||
| Attachment 1 AM12972530-2 Drawings.pdf | ||
| Attachment 3 AK13089191 Drawings.pdf | ||
| Tab 11 - SP3300-23-Q-0201.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
0BSPECIAL PACKAGING INSTRUCTION
Form Approved OMB No. 0704-0188
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Executive Services Directorate, Information
Management Division, 4800 Mark Center Drive, Alexandria, VA 22350-3100 (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THIS ADDRESS.
1. PART OR DRAWING NO. NOMENCLATURE 2. CODE IDENT 3. SPI NO.
12984689 MOUNT, TELESCOPE & QUADRANT M187A1 19200 AM12984689
4. NATIONAL STOCK NO. 5.DATE OF
DRAWING/SPI(YYMMDD)
6. REVISION / ERR NO.
1240-01-483-5324 220110 A / L21K2296
7. QUP / UNIT OF ISSUE 8. ICQ 9. UNIT PACK WT. (LB) (0.0) 10. UNIT PACK CU (CU.
FT.)(0.000)
11. UNIT PACK SIZE (INCHES)(00.0)
1/EA - 49.0 4.475 24.1 X 19.1 X 16.8
18.
STEPS
19.
REQD
20.
DESCRIPTION
12. MILITARY PRESERVATION 1 AR PRESERVATIVE: (SEE NOTE A)
MIL-STD-2073-1, METHOD 41 2 AR WRAP: MIL-PRF-121, TYPE I (SEE NOTE B)
13. CLEANING 3 1 BAG: MIL-DTL-117, TYPE I, CLASS E
* (SEE NOTE C)
14. DRYING 4 AR CUSHIONING: MIL-PRF-26514, TYPE I, GRADE C,
* CLASS 1 (SEE NOTE D)
15. PACKING 5 1 CONTAINER: ASTM D5118/D5118M, TYPE CF,
a. LEVEL A CLASS WR, GRADE W5c, STYLE RSC
MIL-STD-2073-1 6 AR CLOSURE: ASTM D1974/D1974M,
b. LEVEL B SEALING METHOD B
MIL-STD-2073-1 7 1 CONTAINER: ASTM D6251/D6251M, TYPE III,
16. MARKING CLASS 2, TREATMENT B
MIL-STD-129 8 AR CLOSURE: ASTM D6251/D6251M
17. NOTES/DRAWING
SPECIFICATIONS, STANDARDS AND DRAWINGS LISTED HEREIN WHICH ARE IN EFFECT ON THE DATE OF THE SOLICITATION FORM A PART OF THIS PACKAGING INSTRUCTION. THE APPLICABLE GENERAL AND REFERENCED REQUIREMENTS OF SPECIFICATION MIL-STD-2073-1 FORM PART OF THESE INSTRUCTIONS. UNLESS OTHERWISE SPECIFIED, MATERIALS WILL BE MINIMUM SIZE IN ACCORDANCE WITH MIL-STD-2073-1. WEIGHTS AND SIZES ARE ESTIMATED AND MAY VARY SLIGHTLY. INTERMEDIATE PACKAGING AND PACKING WILL BE IN ACCORDANCE WITH
SPECIFICATION MIL-STD-2073-1 OR AS OTHERWISE SPECIFIED HEREIN.
TOLERANCES SHALL BE IN ACCORDANCE WITH MATERIAL SPECIFICATIONS. QUALITY PERFORMANCE AND TESTING REQUIREMENTS SHALL BE IN CONFORMANCE WITH MIL-STD-2073-1, OR AS OTHERWISE SPECIFIED.
* UNLESS OTHERWISE SPECIFIED, CLEANING AND DRYING SHALL BE IN ACCORDANCE WITH PARAGRAPH 5.2.1 OF MIL-
STD-2073-1.
A. APPLY PRESERVATIVES AS SPECIFIED AND DIRECTED IN THE ITEM DRAWING AND ALL SUB-ASSEMBLY ITEM
DRAWINGS.
B. APPLY A SINGLE LAYER OF THE SPECIFIED WRAPPING MATERIAL TO THE ITEM. SECURE WITH TAPE IN ACCORDANCE WITH ASTM D6123/D6123M. DO NOT ALLOW TAPE TO COME INTO CONTACT WITH THE ITEM.
C. EXPEL AIR FROM BAG PRIOR TO HEAT-SEALING TO ENSURE FIT WITH CUSHIONING.
D. CONTRUCT CUSHIONING USING THE SPECIFIED MATERIAL AND IN ACCORDANCE WITH FIGURES 1 AND 2. PLACE CUSHION 1 AT THE BOTTOM OF THE CONTAINER AND INSERT THE BAGGED MOUNT, TELESCOPE & QUADRANT M187A1 INTO ITS CAVITY. THEN PLACE CUSHION 2 ABOVE THE BAGGED MOUNT, TELESCOPE & QUADRANT
M187A1 SUCH THAT THE BAGGED ITEM FITS INTO THE CAVITY.
WSC: GJ ITEM SIZE: 16.8 X 13.3 X 9.8 ITEM WEIGHT: 38.0 APPROVED: NELSON OLIVEIRA
DISTRIBUTION STATEMENT A: APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLIMITED.
DD Form 2169, JUN 97 Previous editions are obsolete Page 1 of 3 Pages
SPECIAL PACKAGING INSTRUCTION (CONTINUATION SHEET) Form Approved OMB No. 0704-0188
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Executive Services Directorate, Information
Management Division, 4800 Mark Center Drive, Alexandria, VA 22350-3100 (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THIS ADDRESS.
1. PART OR DRAWING NO. NOMENCLATURE 2. CODE IDENT 3. SPI NO.
12984689 MOUNT, TELESCOPE & QUADRANT M187A1 19200 AM12984689
4. NATIONAL STOCK NO. 5.DATE OF
DRAWING/SPI(YYMMDD)
6. REVISION / ERR NO.
1240-01-483-5324 220110 A / L21K2296
17. NOTES/DRAWINGS
FIGURE 1: CUSHION 1
DD Form 2169, JUN 97 Previous editions are obsolete Page 2 of 3 Pages
SPECIAL PACKAGING INSTRUCTION (CONTINUATION SHEET) Form Approved OMB No. 0704-0188
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Executive Services Directorate, Information
Management Division, 4800 Mark Center Drive, Alexandria, VA 22350-3100 (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THIS ADDRESS.
1. PART OR DRAWING NO. NOMENCLATURE 2. CODE IDENT 3. SPI NO.
12984689 MOUNT, TELESCOPE & QUADRANT M187A1 19200 AM12984689
4. NATIONAL STOCK NO. 5.DATE OF
DRAWING/SPI(YYMMDD)
6. REVISION / ERR NO.
1240-01-483-5324 220110 A / L21K2296
17. NOTES/DRAWINGS
FIGURE 2: CUSHION 2
DD Form 2169, JUN 97 Previous editions are obsolete Page 3 of 3 Pages
SPECIAL PACKAGING INSTRUCTION
File details come from the government source that posted it. Updated .