Attachment 1 AM12972530-2 Drawings.pdf
PDF 55 KB Posted
- Attached to
- DDAA SPI SETS Federal contract opportunity
- Solicitation number
- SP330023Q0201
- Issued by
- Defense Logistics Agency Distribution
About this file
This Special Packaging Instruction (SPI) sets forth requirements for packaging an Eyesafe Laser Rangefinder Subsystem. The SPI specifies that the rangefinder must be wrapped in lens tissue and cushioning, secured with tape, and placed in a Type III bag. It then requires placement inside a reusable container that meets military-standard dimensions of 11.60 x 9.45 x 4.25 inches and weighs 20.12 pounds. Markings on the container state it is reusable. As a last resort, the rangefinder can be wrapped in cushioning and placed in a Type III container. The related solicitation from the Defense Logistics Agency Distribution seeks DDAA SPI sets.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Tab 11 - SP3300-23-Q-0201 P0001 Amendment.pdf | ||
| Attachment 2 AM12984689 Drawings.pdf | ||
| Attachment 3 AK13089191 Drawings.pdf | ||
| Tab 11 - SP3300-23-Q-0201.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SPECIAL PACKAGING INSTRUCTION Form Approved OMB No. 0704-0188
Public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, Va 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project(0704-0188). Washington, DC 20503. Please do not return your form to either of these addresses.
1. PART OR DRAWING NO. NOMENCLATURE 2. CODE INDENT 3. SPI NO.
12972530-2 EYESAFE LASER RANGEFINDER SUBSYSTEM 19200 AM12972530-2
4. NATIONAL STOCK NO. 5.DATE OF
DRAWING/SPI(YYMMDD)
6. REVISION / ERR NO.
1240-01-497-9758 120111 -/L12K2012
7. QUP / UNIT OF ISSUE 8. ICQ 9. UNIT PACK WT. (LB) (0.0) 10. UNIT PACK CU (CU.
FT.)(0.000)
11. UNIT PACK SIZE (INCHES)(00.0)
1/EA 47.0 2.875 21.5 X 15.2 X 15.2
18.
STEPS
19.
REQD
20.
DESCRIPTION
12. MILITARY PRESERVATION 1 LENS TISSUE: A-A-50177, TYPE ll SEE NOTE A.
MIL-STD-2073-1, METHOD 45 2 CUSHIONING: PPP-C-795, CLASS I SEE NOTE A.
13. CLEANING 3 TAPE: A-A-883
* AND ** 4 BAG: MIL-DTL-117, TYPE lll, CLASS B SEE NOTE B
14. DRYING 5 CUSHION: SEE SHEET 2
* 6 CONTAINER: 9338396 SEE SHEET 2 SEE NOTE C.
15. PACKING F NSN 8145-01-158-6802
a. LEVEL A
MIL-STD-2073-1
b. LEVEL B
MIL-STD-2073-1
16. MARKING
MIL-STD-129 SEE NOTE E.
17. NOTES/DRAWING
* UNLESS OTHERWISE SPECIFIED, CLEANING AND DRYING SHALL BE IN ACCORDANCE WITH PARAGRAPH 5.2.1 OF
MIL-STD-2073-1.
WEIGHTS AND SIZES ARE ESTIMATED AND MAY VARY SLIGHTLY.
INTERMEDIATE PACKAGING AND PACKING WILL BE IN ACCORDANCE WITH SPECIFICATION MIL-STD-2073-1 OR AS
OTHERWISE SPECIFIED HEREIN.
** CLEANING OF OPTICAL SURFACES SHALL BE AS FOLLOWS:
- LOOSE PARTICLES OF DUST SHALL BE REMOVED FROM THE SURFACE OF THE OPTICAL ELEMENTS WITH
A CAMEL HAIR BRUSH.
- THE SURFACES SHALL BE WIPED WITH A CIRCULAR MOTION USING COTTON, LENS TISSUE PAPER OR FRESHLY
LAUNDERED CHEESECLOTH WHICH IS SATURATED WITH ALCOHOL.
CAUTION: ONLY LENS TISSUE PAPER OR BATISTE CLOTH SHALL BE USED TO CLEAN PLASTIC ELEMENTS. THE SURFACES SHALL BE DRIED BY WIPING WITH CLEAN COTTON, LENS PAPER OR FRESHLY LAUNDERED
CLEESECLOTH.
- A SWAB SHALL BE MADE BY WRAPPING ONE PIECE OF LENS TISSUE PAPER AROUND THE END OF AN ORANGE STICK OR EQUAL. ONE OR TWO DROPS OF ALCOHOL SHALL BE ADDED ON THE TIP OF THE SWAB. EXERT LIGHT DOWNWARD PRESSURE ON THE SWAB END WHILE MOVING IN A CIRCULAR MOTION BEGINNING AT THE CENTER OF THE POLISHED SURFACE. INCREASE RADIUS OF SWABBING AREA UNTIL THERE IS NO TRACE OF DIRT, LINT OR SMEARS ON
THE SWABBED SURFACE.
- A RUBBER SYRINGE SHALL BE USED AS BELLOWS TO REMOVE ANY PARTICLES REMAINING ON THE CLEANED
SURFACE.
(A) COVER OPTICAL SURFACES WITH A DOUBLE THICKNESS OF LENS TISSUE (STEP 1) & CUSHIONING (STEP 2). SECURE
WITH TAPE A-A-883.
(B) FOR EASIER MOVEMENT IN AND OUT OF CUSHION, THE UNIT SHOULD BE PLACED IN BAG.
(C) CLOSURE REQUIREMENTS: (1) PROPERLY SEAT GASKET IN GROOVE OF COVER. (2) TAP AROUND LOCKING RING AT VARIOUS POINTS AS CLOSURE BOLT IS TIGHTENED. (3) TORQUE TO 6 PLUS OR MINUS ONE-HALF FOOT POUNDS.
(D) UNIT CONTAINER IS SHIPPING CONTAINER.
(E) MARK CONTAINER: “REUSABLE CONTAINER – DO NOT DESTROY”
(F) EVERY EFFORT SHALL BE MABE TO PACKAGE THE LRF TO THE REQUIREMENTS OF SHEET 2. ORDER CONTAINER ASSEMBLY 9338396, NSN 8145-01-158-6802. WHEN PACKAGED IN THE CONTAINER , THE NSN BECOMES 1240-01-498-2086 LRF W/CONTAINER PN13000955. AS A LAST RESORT FOR CONDITION CODE F ASSETS, THE LRF SHALL BE OVER WRAP WITH SEVERAL LAYERS OF CUSHIONING AND PLACE INTO A TYPE III, PPP-B-1672 CONTAINER, NSN8115-01-015-1312.
WSC: JE ITEM SIZE: 11.60 X 9.45 X 4.25 ITEM WEIGHT: 20.12 APPROVED: M.J. BARNANSKY
STATEMENT A, UNLIMITED
DD Form 2169, OCT 96 Previous editions are obsolete Page 1 of 2 Pages
SPECIAL PACKAGING INSTRUCTION (Continuation sheet) Form Approved OMB No. 0704-0188
Public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, Va 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project(0704-0188).
Washington, DC 20503. Please do not return your form to either of these addresses.
1. PART OR DRAWING NO. NOMENCLATURE 2. CODE INDENT 3. SPI NO.
12972530-2 EYESAFE LASER RANGEFINDER SUBSYSTEM 19200 AM12972530-2
4. NATIONAL STOCK NO. 5.DATE OF
DRAWING/SPI(YYMMDD)
6. REVISION / ERR NO.
1240-01-497-9758 120111 -/L12K2012
17. NOTES / DRAWINGS CONTINUED
DD Form 2169C, SEP 96 Previous editions are obsolete Page 2 of 2 Pages
MS27683-60
MS27683-80
MS27683-90
MS27683-1
File details come from the government source that posted it. Updated .