Attachment 1 - Specifications.pdf
PDF 27 KB Posted
- Attached to
- Grain Dump Box Federal contract opportunity
- Solicitation number
- 1232SA26Q0134
About this file
This is a Statement of Objectives for a federal procurement by the USDA, Agricultural Research Service (ARS), Northwest Irrigation and Soils Research Unit in Kimberly, Idaho. The requirement is to provide and install a complete 24-foot agricultural grain dump box bed system with a 30-ton scissor lift hoist on a 2025 Freightliner 114SD truck.
The grain box must be constructed of steel (not aluminum) with dimensions of 96 inches wide and less than 60 inches in side height. Steel specifications include 11 to 12 gauge sides (1/8 to 7/64 inch thickness) and 7 to 10 gauge floor (3/16 to 9/64 inch thickness), with the frame and sides built to industry standard specifications for the capacity size. The box color options are white, red, gray, or black. The dump system requires a dual 30-ton scissor hoist with electric or pneumatic valves on the hydraulic tank and a PTO-driven hydraulic pump. Additional features include a hydraulic high-lift one-piece tailgate with a locking system and three grain doors, LED side marker lights, and a hand crank roll tarp system. The rear pivot point must be 20 inches or less from the rear of the grain box, with a strengthening plate added to the truck frame at this point. The contractor must remount turn signal and brake lights if necessary, secure all lines for highway use, and complete installation on-site in Kimberly, Idaho, or within 200 miles of that location. The truck's existing rear axles cannot be moved, though frame shortening after the rear axles is permitted.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| RFQ_1232SA26Q0134B.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
The USDA, ARS, Northwest Irrigation and Soils Research Unit, Kimberly, ID, requires a new 24-ft agricultural grain dump box bed with 30-ton scissor lift hoist, all associated controls, and installation on a 2025 Freightliner 114SD truck.
1. Provide and install a 24-ft long agricultural dump box body.
2. Grain box made of steel, not aluminum.
3. Grain box side height is less than 60 inches, width is 96 inches.
4. 11 to 12 gauge steel sides (1/8 to 7/64 inch)
5. 7 to 10 gauge steel oor (3/16 to 9/64 inch)
6. Grain box frame is built using industry standard size metal for capacity size.
7. Grain box sides have industry standard strengthening for capacity size.
8. Grain box color can be white, red, gray or black.
9. Hydraulic high lift, one-piece tailgate with locking system and three grain doors on the tailgate.
10. Dual 30-ton scissor hoist with electric or pneumatic valves on hydraulic tank and pto driven hydraulic pump.
11. Rear pivot point of grain body is 20 inches or less from rear of grain box.
12. Strengthening plate added to rear of truck frame by grain bed rear pivot point.
13. LED side marker lights.
14. Hand crank, roll tarp system.
15. Rear truck axles cannot be moved. Shortening truck frame after rear axles is permitted.
16. Remount turn signal and brake lights if necessary.
17. All lights, hydraulic, pneumatic lines and other lines are secured for highway use.
18. Installation must be done on site in Kimberly, ID, or within 200 miles of Kimberly, ID
2025 Freightliner 114 SD truck dimensions are as follows:
179 inches from back of truck cab to center of front rear axle.
Spacing between tandem rear axles is 55 inches.
Distance from rear axle to end of frame is 88 inches.
Truck transmission is a Detroit DT12 automatic transmission.
File details come from the government source that posted it. Updated .