Attachment 1 Signed AT_OPSEC Coversheet_Digital_Signature for C130 display.pdf

____YES ___NO ___PWS

____YES ___NO ___PWS

____YES ___NO ___PWS

4. iWATCH training ____YES ___NO ___PWS

____YES ___NO ___PWS

____YES ___NO ___PWS

____YES ___NO ___PWS

____YES ___NO ___PWS

____YES ___NO ___PWS

____YES ___NO ___PWS

____YES ___NO ___PWS

____YES ___NO ___PWS

Operations Security Review Signature: I am OPSEC level II certified and have reviewed the requirements package and it is in compliance with Army Regulation 530- 1, Operations Security.

7. Requirement for OPSEC training

3. Access and general protection policy and procedures.

8. Information assurance/information technology training

Reviewer____________________________ Typed or printed name, rank/civ grade Signature

Date _____________________________

Phone Number ___________________

9. Information assurance/information technology training certification

1. AT level 1 training (general)

CONTRACT REQUIREMENTS PACKAGE

ANTITERRORISM/OPERATIONS SECURITY REVIEW

COVER SHEET

Section I.

Purpose of cover sheet: to document the review of the requirements package performance work statement (PWS), quality assurance surveillance plan, and any applicable source selection evaluation criteria for antiterrorism (AT) and other related protection matters to include, but not limited to: AT, operations security (OPSEC), information assurance (IA), physical security, law enforcement, intelligence, foreign disclosure.

Army policy requirement: inclusion of a signed AT/OPSEC cover sheet is required in all requirements packages except for supply contracts under the simplified acquisition level threshold ($150,000), field ordering officer actions, and Government purchase card purchases. Command policy may require this form for supply contracts under the simplified acquisition level threshold.

Mandatory review and signatures: The organizational antiterrorism officer (ATO) must review each requirements package prior to submission to the supporting contracting activity to include coordination with other staff review as appropriate per section II below. If the requiring activity does not have an ATO, the first ATO in the chain of command will review the contract for AT considerations. An OPSEC officer review is also mandatory.

Section II. Standard Contract LanguageProvision/Contract Clause Text Applicability and/or Additional PWS Language. If the standard contract or clause language text found on page two of this form is sufficient to meet specific contract request requirements, check "yes" in block below and include this language in the PWS. If standard contractual text (provisions or clauses) or clause language does not apply, check "no." If the standard PWS language applies, but is not in of itself sufficient, check "yes" and "PWS" and include both the standard language and additional contract specific language in the PWS. If standard contractual text or clause language is not desired, but there is related contract specific language in the PWS, check "no" and "PWS."

Reviewer____________________________ Typed or printed name, rank/civ grade Signature

Date _____________________________

Phone Number ___________________

10. Contractor Authorized to Accompany the Force clause

Antiterrorism Review Signature: I am ATO level II certified and have reviewed the requirements package and understand my responsibilities IAW Army Reg 525- 13, Antiterrorism.

2. AT awareness training for US based contractor personnel traveling overseas

5. Access to government information systems

6. OPSEC SOP/Plan requirements

11. Contract requiring performance or delivery in a foreign country

12. Handling/Access to Classified Information

Section III. Remarks:

1. AT Level I Training. This provision/contract text is for contractor employees with an area of performance within an Army controlled installation, facility or area . All contractor employees, to include subcontractor employees, requiring access Army installations, facilities and controlled access areas shall complete AT Level I awareness training within 45 calendar days after contract start date or effective date of incorporation of this requirement into the contract, whichever is applicable. The contractor shall submit certificates of completion for each affected contractor employee and subcontractor employee, to the COR or to the contracting officer, if a COR is not assigned, within 30 calendar daysafter completion of training by all employees and subcontractor personnel. AT level I awareness training is available at the following website: https://atlevel1.dtic.mil/at.

Section II. Standard Contract Provision and Clause Text Applicability and/or Additional PWS Language.

3. Access and General Protection/Security Policy and Procedures. This standard language text is for contractor employees with an area of performance within an Army controlled installation, facility or area. Contractor and all associated sub-contractors employees shall comply with applicable installation, facility and area commander installation/facility access and local security policies and procedures (provided by government representative). The contractor shall also provide all information required for background checks to meet installation access requirements to be accomplished by installation Provost Marshal Office, Director of Emergency Services or Security Office. Contractor workforce must comply with all personal identity verification requirements as directed by DOD, HQDA and/or local policy. Additionally, Executive Order 13465, 8 September 2008, mandates that all Federal Contractors and Subcontractors are required to use E-Verify for all employees working directly on any federal contract to determine eligibility to legally work in the United States. It is the responsibility of the employer to provide the employee a copy of the E-Verify. The E-Verify will be used ICW other applicable documentation to determine eligibility for access to JBLM. In addition to the changes otherwise authorized by the changes clause of this contract, should the Force Protection Condition (FPCON) at any individual facility or installation change, the Government may require changes in contractor security matters or processes.

2. AT Awareness Training for Contractor Personnel Traveling Overseas. This standard language text required US based contractor employees and associated sub-contractor employees to make available and to receive government provided area of responsibility (AOR) specific AT awareness training as directed by AR 525-13.

Specific AOR training content is directed by the combatant commander with the unit ATO being the local point of contact.

6. For Contracts that Require an OPSEC Standing Operating Procedure/Plan. The contractor shall develop an OPSEC Standing Operating Procedure (SOP)/Plan within 90 calendar days of contract award, to be reviewed and approved by the responsible Government OPSEC officer, per AR 530-1, Operations Security. This SOP/Plan will include the government's critical information, why it needs to be protected, where it is located, who is responsible for it, and how to protect it. In addition, the contractor shall identify an individual who will be an OPSEC Coordinator. The contractor will ensure this individual becomes OPSEC Level II certified per AR 530-1.

7. For Contracts that Require OPSEC Training. Per AR 530-1, Operations Security, new contractor employees must complete Level I OPSEC training within 30 calendar days of their reporting for duty. All contractor employees must complete annual OPSEC awareness training.

12. For Contracts That Require Handling or Access to Classified Information. Contractor shall comply with FAR 52.204-2, Security Requirements. This clause involves access to information classified “Confidential,” “Secret,” or “Top Secret” and requires contractors to comply with— (1) The Security Agreement (DD Form 441), including the National Industrial Security Program Operating Manual (DoD 5220.22-M); any revisions to DOD 5220.22-M, notice of which has been furnished to the contractor.

11. For Contract Requiring Performance or Delivery in a Foreign Country, DFARS Clause 252.225-7043, Antiterrorism/Force Protection for Defense Contractors Outside the US. The clause shall be used in solicitations and contracts that require performance or delivery in a foreign country. This clause applies to both contingencies and non-contingency support. The key AT requirement is for non-local national contractor personnel to comply with theater clearance requirements and allows the combatant commander to exercise oversight to ensure the contractor’s compliance with combatant commander and subordinate task force commander policies and directives.

10. For Contractors Authorized to Accompany the Force. DFARS Clause 252.225-7040, Contractor Personnel Authorized to Accompany U.S. Armed Forces Deployed Outside the United States. The clause shall be used in solicitations and contracts that authorize contractor personnel to accompany US Armed Forces deployed outside the US in contingency operations; humanitarian or peacekeeping operations; or other military operations or exercises, when designated by the combatant commander. The clause discusses the following AT/OPSEC related topics: required compliance with laws and regulations, pre-deployment requirements, required training (per combatant command guidance), and personnel data required.

9. For information assurance (IA)/information technology (IT) cortication. Per DoD 8570.01-M , DFARS 252.239.7001 and AR 25-2, the contractor employees supporting IA/IT functions shall be appropriately certified upon contract award. The baseline certification as stipulated in DoD 8570.01-M must be completed upon contract award.

5. Contractor Employees Who Require Access to Government Information Systems. All contractor employees with access to a government info system must be registered in the ATCTS (Army Training Certification Tracking System) at commencement of services, and must successfully complete the DOD Information Assurance Awareness prior to access to the IS and then annually thereafter.

4. iWATCH Training. This standard language is for contractor employees with an area of performance within an Army controlled installation, facility or area. The contractor and all associated sub-contractors shall brief all employees on the local iWATCH program (training standards provided by the requiring activity ATO).

This local developed training will be used to inform employees of the types of behavior to watch for and instruct employees to report suspicious activity to the COR. This training shall be completed within 45 calendar days of contract award and within 30 calendar days of new employees commencing performance with the results reported to the COR NLT 60 calendar days after contract award.

8. For Information assurance (IA)/information technology (IT) training. All contractor employees and associated sub-contractor employees must complete the DoD IA awareness training before issuance of network access and annually thereafter. All contractor employees working IA/IT functions must comply with DoD and Army training requirements in DoDD 8570.01, DoD 8570.01-M and AR 25-2 within six months of employment.

Cover Sheet

Section III Remarks: IJO MAA000132J

POC is Terry Borne 253-345-0254

Requirement description: Static Display for C-130E and basketball court