Attachment 1 Salient Characteristics.pdf

PRODUCTION SPEED:

� Up to 35 loads per hour NOTE: Process rates will vary with load size, number of wraps & forklift load/unload time

LOAD CAPACITY:

� Maximum load weight: 4000# dynamic – 10,000# static � LP - Maximum load size to safely clear the tower: 50” x 50” x 80” H (71” max load diagonal)

LOW PROFILE TURNTABLE:

� 57” Diameter laser-cut steel plate with surround deck protection � Maintenance free - 36 roller bearing support system � Turntable height 2.813” from floor � ANSI # 50 direct chain drive c/w chain tensioner � Between 3 and 12 RPM rotational speed c/w soft start acceleration � 1/2 HP AC variable speed motor � Final revolution deceleration and positive stop alignment � Rugged surround deck for turntable protection, 3 sided loading and pit mounting � Front and back forklift ports for easy movement � Accu-Count exact turntable positioning system for additional film savings!

� Optional loading ramp 60” long x 48” wide complete with 10” level porch area available

FILM CARRIAGE ELEVATOR:

� 1/2 HP AC variable speed motor � ANSI #40 direct chain drive c/w shock dampener & Anti-Fall Safety Device

FILM DELIVERY SYSTEM:

� Super Rapid Thread II ™ 20” capacity pre-stretch film carriage

� Special Film Threading Device – Uniquely orientates the sticky side of the film against the pre-stretch rollers and the inside of the load.

� 1/2 HP AC variable speed motor � Fully electronic dynamic dancer corner compensation � 33% to 313% fixed stretch capability � Pre-stretch ratio variable using easy sprocket change � Carriage Descent Obstruction Safety Shut-Off Device � Side mounted film carriage for operator convenience and safety � Superior film-to-roller contact area � Lifetime warranty on pre-stretch roller

CONTROL FEATURES:

� Electronic controls with LCD operator interface � Power Off – On – Reset switch & Power On indicator light � Single button Auto Wrap Cycle Start/Pause � Cycle Pause for applying top sheets � Reinforce Wrap control for mid-wrapping � Emergency Stop button � Turntable Jog button � Film Carriage Lower & Raise buttons � Film Tension (Force-to-Load) control

SP3300-20-Q-0147

Attachment 1 Salient Characteristics

� Separate film carriage raise & lower speed controls � Operator programmable turntable speed control � Triple beam automatic load height detection sensor for dark or shiny loads � Separate 1 to 12 revolution top & bottom wrap control � Selectable Reduced Film Tension parameters for wrapping top and/or bottom of load � A – B – C wrap program selector with capability to input and store unique wrapping parameters for each program � Wiring to be numbered and color coded

STRUCTURAL FEATURES:

� All structural and formed steel construction � Forklift truck portable base structure design – lifting tubes included for front and rear access � Electro-static powder coated paint finish

ELECTRICAL INPUT REQUIREMENTS:

� 115 Volts 1 Phase 60 Hz 15 Amps with dedicated service

SP3300-20-Q-0147

Attachment 1 Salient Characteristics