Attachment 1 - Product Description.docx

Product Description Naval Special Warfare Command Rack Storage Platform

1.0 OBJECTIVE:

1.1 The contractor shall furnish and install three (3) freestanding rack storage platforms with lockable cages underneath the platform in Bldg (3808) high bay.

1.2 The contractor shall provide all labor, supervision, tools, materials, equipment, transportation and disposal necessary to provide and install the rack storage systems. All materials used must match exactly to existing installations to maintain a professional appearance.

2.0 BACKGROUND:

2.1 This requirement is for three (3) rack storage platform and with storage cages underneath. The additional storage space is required within the existing high bay of Building 3808.

2.1.1 One (1) 40 foot x 12 foot storage cage

2.1.2 One (1) 30 foot x 12 foot storage cage

2.1.3 One (1) 12 foot x 12 foot storage cage

See Attachment 2 for placement of where the new cages are to be installed.

2.2 This requirement is to increase the capacity and flat storage space and caged storage space within the high bay. The addition of this rack storage platform will allow for indoor and secure storage of equipment, while increasing flat storage capacity in the high bay. The addition of above describes storage spaces allows for personnel to properly stow and secure all operational equipment.

3.0 DESCRIPTION OF REQUIREMENT:

3.1 The contractor shall provide all labor, supervision, tools, materials, equipment, transportation and disposal necessary to provide and install the rack storage platform. All steel used must be phosphate washed and finished in a gray powder coat to protect against salt water and corrosion.

3.2 The contractor shall provide drawings of proposed installation in their quote in response to the solicitation.

3.3 Installation Requirements:

3.3.1 A laydown area for contractor use will be identified by the requiring activity representative prior to start of installation.

3.3.2 Installation shall be conducted on weekdays during the hours to be established by the unit.

3.3.3 If for any reason, contractor/supplier is unable to complete the assembly and placement of all unloaded items before the end of the workday, the contractor/supplier shall be responsible for moving these items to the designated laydown area until the next available installation date.

3.4 The contractor shall provide and install one (1) freestanding rack storage platform and two (2) storage cages with electrical in the high bay with the following:

3.4.1 Platform Dimensions: 40ft Length x 12ft Depth x 12ft Height.

3.4.2 Configuration: The contractor shall configure the platform with the following specifications. This platform shall be able to store four (4) ISU 90 containers on the top rack and have two lockable cages with overhead lights and four (4) 110V electrical outlets per cage. Minor deviations to the below are allowable but must adhere to the size in the cage dimensions as well as design and weight bearing capacity for the platform.

3.4.2.1 Load Capacity: 150 P.S.F. for general storage.

3.4.2.2 Deck Height: 12 ft.

3.4.2.3 Flooring: 1in x 1/8 in 19W4 painted steel bar grating.

3.4.2.4 Framing: Structural steel.

3.4.2.5 Handrail: 2 Rails, Removable Type.

3.4.2.6 Underneath Cage: Two (2) cages underneath the platform each with the dimensions of 20ft length x 12ft depth x 12ft height. Each cage will have a double wide sliding lockable door, overhead fluorescent lights with a light switch, and four (4) 110V electrical outlets.

3.4.2.7 Two (2) all welded vertical rung ladders at each end of platform.

3.4.2.8 Standard finish, main structure: Gray powder coat. Hand Railing: Safety Yellow Finish. The powder coat shall match existing storage cages.

3.5 The contractor shall provide and install one (1) freestanding rack storage platform and two (2) storage cages with electrical in the high bay with the following:

3.5.1 Platform Dimensions: 30ft Length x 12ft Depth x 12ft Height.

3.5.2 Configuration: The contractor shall configure the platform with the following specifications. This platform shall be able to store three (3) ISU 90 containers on the top rack and have two lockable cages with overhead lights, and four (4) 110V electrical outlets in one cage and only two (2) 110V electrical outlets in the other. Minor deviations to the below are allowable but must adhere to the size in the cage dimensions as well as design and weight bearing capacity for the platform.

3.5.2.1 Load Capacity: 150 P.S.F. for general storage.

3.5.2.2 Deck Height: 12 ft.

3.5.2.3 Flooring: 1in x 1/8 in 19W4 painted steel bar grating.

3.5.2.4 Framing: Structural steel.

3.5.2.5 Handrail: 2 Rail, Removable Type.

3.5.2.6 Underneath Cage: One (1) cage underneath the platform each with the dimensions of 20ft length x 12ft depth x 12ft height. This cage will have a double wide sliding lockable door, overhead fluorescent lights with a light switch, and four (4) 110V electrical outlets. The other cage underneath the platform will have the dimensions of 10ft length x 12ft depth x 12ft height. The cage will have a double wide sliding lockable door, overhead fluorescent lights with a light switch, and two (2) 110V electrical outlets

3.5.2.7 Two (2) all welded vertical rung ladders at each end of platform.

3.5.2.8 Standard finish, main structure: Gray powder coat. Hand Railing: Safety Yellow Finish. The powder coat shall match existing storage cages.

3.6 The contractor shall provide and install one (1) freestanding rack storage platform and one (1) storage cage with electrical in the high bay with the following:

3.6.1 Platform Dimensions: 12ft Length x 12ft Depth x 12ft Height.

3.6.2 Configuration: The contractor shall configure the platform with the following specifications. This platform shall be able to store one (1) 463L air cargo pallet on the top rack and have one lockable cages with overhead lights and two (2) 110V electrical outlets. Minor deviations to the below are allowable but must adhere to the size in the cage dimensions as well as design and weight bearing capacity for the platform.

3.6.2.1 Load Capacity: 150 P.S.F. for general storage.

3.6.2.2 Deck Height: 12 ft.

3.6.2.3 Flooring: 1in x 1/8 in 19W4 painted steel bar grating.

3.6.2.4 Framing: Structural steel.

3.6.2.5 Handrail: 2 Rail, Removable Type.

3.6.2.6 Cages: One (1) cage underneath the platform each with the dimensions of 12ft length x 12ft depth x 12ft height. The cage will have a double wide sliding lockable door, overhead fluorescent lights with a light switch, and two (2) 110V electrical outlets.

3.6.2.7 Two (2) all welded vertical rung ladders at each end of platform.

3.6.2.8 Standard finish, main structure: Gray powder coat. Hand Railing: Safety Yellow Finish. The powder coat shall match existing storage cages.

5.0 SECURITY: The contractor will require an escort in the building which will be provided by the government.

6.0 QUALITY ASSURANCE: The Government reserves the right to perform inspections and surveillance to evaluate the Contractor’s compliance to the contract terms to include proper delivery of quantity and type of goods. The Government will make every effort to ensure that the surveillance methods used are conducted in an objective, fair, and consistent manner.

Product Description as of 18 July 2017