Attachment 0004 SOW_M203_Barrel_3-26-2019.pdf

SOW for Rifling for M203 Barrel

• 12012006 – Apply Rifling for M203 Barrel, per note 6 on drawing 12012006 REV RZ01 and 12012006 process drawing (117 Each)

Apply broach rifling to the above part number according to the process dimensions drawing and drawing revision, per note ?, as stated. RIA-JMTC shall ship parts to said vendor. Vendor will return the parts to RIA-JMTC in appropriate container with protective layering to ensure the parts will not be damaged.

The parts can be sent in multiple batches. The vendor will have to pass a FAT prior to starting production. The vendor will have 45 days to process the FAT batch of parts and return the RIA-JMTC.

The monthly Qty’s can be adjusted based on JMTC’s manufacture time and the vendors manufacture time. The vendor will have 30 days to complete and return to RIA-JMTC. See below.

Vendor will be responsible for providing documentation (Inspection Reports, i.e. CMM reports, manual reports) that each SCN#, or lot IAW 12993884 REV J, meets the drawing specification for each batch of parts. Documentation shall be shipped to JMTC with the parts in each batch. If these reports do not accompany the parts, then the lot will be rejected until this is resolved.

All Quality Assurance provisions per drawing 12993884 REV J