Attachment 0003 Quality Assurance Drawing 12993884 REV J.pdf

DRAWN BY DATE (YEAR-MO-DA)

ENGINEERCHECKER

UNLESS OTHERWISE SPECIFIED

ALL DIMENSIONS ARE IN INCHES

TOLERANCE ON ANGLES �#� �$�

2 PLACE DECIMALS �#�

3 PLACE DECIMALS �#�

DESIGN APPROVAL

DRAWING APPROVAL

MATL ENGR

DESIGN ACTIVITYCONTRACT NUMBER

CONTRACTOR

ENGINEER QUALITY ENGINEER

MODELED BY

SIZE CAGE CODE

SCALE UNIT WT SHEET

DRAWING SIZE B

FORMAT: B_TACOM_ENG_1_0

4 3 2 1

A

B

A

B

DWG NO.

J J

7 8

1 OF 8 N/A 1.000

12993884 19200B

GENERAL REQUIREMENTS FOR

QUALITY ASSURANCE PROVISIONS

(SM & MDM CAL WPN SYS)

US ARMY

ARMAMENT RESEARCH, DEVELOPMENT AND ENGINEERING CENTER

PICATINNY ARSENAL, NEW JERSEY 07806-5000

2001-02-07R. DELLICKER

2001-02-07L. CICHUKI

L. CICHUKI

L. CICHUKI

2000-06-14N. PINEDA

N. PINEDA

THIRD ANGLE PROJECTION

DO NOT SCALE DRAWING

APPLICATION

USED ONNEXT ASSY

SMALL AND

MEDIUM CALIBER

WEAPON SYSTEMS

AND COMPONENTS

AND ACCESSORIES

PMIC

MECHANICAL

PROPERTIES

YP

TS

EL2

RA

BH

RH

REVISIONS

APPROVEDDATE (YEAR-MO-DA)DESCRIPTIONREVISION

JTD2015-08-11NOR L15S3086 / 2015-08-04H

JTD2016-01-07NOR L15S3135 / 2016-01-05J

PART NO. 12993884

THIS DRAWING WAS GENERATED FROM A SOLID MODEL

AND IS CAD MAINTAINED. CHANGES SHALL BE

INCORPORATED BY THE DESIGN ACTIVITY.

NSN

REFERENCE TO GAGE PART NO.

(WHEN REQUIRED)

OR DESCRIPTION OF CHARACTERISTIC

(OPTIONAL)

REV

STATUS

REV J J

SHEET 1 2 3 4

REV J J J J

SHEET 5 6

NOTES:

1. MIL-STD-1916 APPLIES.

2. QUALITY ASSURANCE PROVISIONS.

A. UNLESS OTHERWISE SPECIFIED IN THE CONTRACT, THE CONTRACTOR IS

RESPONSIBLE FOR THE PERFORMANCE OF ALL INSPECTION REQUIREMENTS

SPECIFIED HEREIN AND ON THE APPLICABLE DRAWING(S).

B. CHARACTERISTICS AND INSPECTION REQUIREMENTS ARE IDENTIFIED ON

THE APPLICALE DRAWING(S) AS FOLLOWS:

DISTRIBUTION STATEMENT A. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLIMITED.

METHOD OF INSPECTION:

C - STANDARD MEASUREMENT & TEST EQUIPMENT

S - SPECIAL TEST EQUIPMENT

V - VISUAL

W - CERTIFICATE OF CONFORMANCE

Y - CERTIFIED TEST REPORT

Z - TEST METHODS AND PROCEDURES

VERIFICATION LEVEL PER MIL-STD-1916

WHEN NO SAMPLING IS ALLOWED, 100%

INSPECTION IS PERFORMED, AND THE

VERIFICATION LEVEL IS INDICATED AS "0"

CHARACTERISTIC NUMBER:

1 THRU 99 - CRITICAL

101 THRU 199 - MAJOR

201 THRU 299 - MINOR

301 THRU 399 - SPECIAL TEST METHOD /

SPECIAL SAMPLING PLAN

401 THRU 499 - CERTIFICATION REQUIREMENT

501 THRU 599 - DEFINED TEST METHOD

DESIGN ACTIVITY

SIZE CAGE CODE

SCALE UNIT WT SHEET

DRAWING SIZE B

FORMAT: B_TACOM_ENG_1_0

4 3 2 1

A

B

A

B

DWG NO.

2 OF 8 N/A 1.000

12993884 19200B

GENERAL REQUIREMENTS FOR

QUALITY ASSURANCE PROVISIONS

(SM & MDM CAL WPN SYS)

US ARMY

ARMAMENT RESEARCH, DEVELOPMENT AND ENGINEERING CENTER

PICATINNY ARSENAL, NEW JERSEY 07806-5000

REVISIONS

APPROVEDDATE (YEAR-MO-DA)DESCRIPTIONREVISION

JTD2015-08-11NOR L15S3086 / 2015-08-04H

JTD2016-01-07NOR L15S3135 / 2016-01-05J

C. INSPECTION PROCEDURES.

(1) FIRST ARTICLE TEST/INSPECTION. UNLESS WAIVED BY THE CURRENT DESIGN ACTIVITY, A FIRST ARTICLE TEST/INSPECTION IS REQUIRED. UNLESS OTHERWISE SPECIFIED IN THE CONTRACT, THE FIRST ARTICLE SHALL CONSIST OF FIVE (5) UNITS OF PRODUCT. ACCEPTANCE SHALL BE BASED ON CONFORMANCE TO ALL APPLICABLE REQUIREMENTS SPECIFIED HEREIN AND ON APPLICABLE DRAWINGS. FIRST ARTICLE TEST/INSPECTION REPORTS SHALL INCLUDE A DOCUMENTED LISTING OF ALL APPLICABLE REQUIREMENTS AND TEST/INSPECTION RESULTS FOR EACH OF THE FIVE UNITS OF PRODUCT. WITH REGARD TO MOLDED OR CAST PARTS ONLY, UNLESS OTHERWISE SPECIFIED IN THE CONTRACT OR ON THE APPLICABLE DRAWING, THE FIRST ARTICLE SHALL CONSIST OF FIVE PARTS FROM EACH CAVITY FROM EACH MOLD TO BE USED TO SATISFY THE CONTRACT QUANTITY; FURTHERMORE, IF A MOLD(S) IS REWORKED, ALTERED, OR REPAIRED, SUCH THAT ANY DIMENSION(S) IS AFFECTED, THEN A NEW FIRST ARTICLE SHALL BE SUBMITTED, AND THE AFFECTED DIMENSION(S) SHALL BE IDENTIFIED IN THE INSPECTION REPORT.

(2) LOT ACCEPTANCE TESTING. UNLESS OTHERWISE SPECIFIED, VERIFICATION LEVEL VII PER MIL-STD-1916 SHALL APPLY TO CRITICAL CHARACTERISTICS. CRITICAL, MAJOR, AND MINOR CHARACTERISTICS (SHOWING QUANTITATIVE RESULTS, UNLESS AN ACCEPTED GAGE SHOWS PASS/FAIL), CERTIFICATES OF CONFORMANCE, CERTIFIED TEST REPORTS, AND TEST METHODS AND PROCEDURES ARE REQUIRED AS SPECIFIED ON EACH APPLICABLE DRAWING. ALL OTHER CHARACTERISTICS NOT SPECIFICALLY IDENTIFIED FOR INSPECTION ARE SUBJECT TO CONTROL UNDER THE CONTRACTOR'S QUALITY PROGRAM OR INSPECTION SYSTEM AND MAY BE SUBJECT TO GOVERNMENT REVIEW FOR THE DURATION

OF THE CONTRACT.

D. WORKMANSHIP. IN ADDITION TO THE REQUIREMENTS OF APPLICABLE ITEM SPECIFICATIONS, PARTS, ASSEMBLIES, SUBSYSTEMS, AND SYSTEMS SHALL BE VISUALLY EXAMINED TO DETERMINE COMPLIANCE WITH THE FOLLOWING REQUIREMENTS: THE QUALITY OF WORKMANSHIP SHALL NOT ADVERSELY AFFECT SAFETY, FUNCTION, PERFORMANCE, SERVICEABILITY, INTERCHANGEABILITY, AND APPEARANCE. COMPLETED PARTS AND ASSEMBLIES SHALL NOT EXHIBIT DEFECTIVE MATERIAL OR PROCESSING SUCH AS SEAMS, LAPS, LAMINATIONS, CRACKS, FINS, EXTRANEOUS MATERIAL, VISIBLE STEPS OR IRREGULARITIES, SHARP EDGES, NICKS, SCRATCHES, BURRS, TOOL SCORES AND GOUGES, DEFORMATIONS, MISSING OPERATIONS, IMPROPER ASSEMBLY, MISSING PARTS, STAINS, CORROSION, NON-SPECIFIED OXIDATION (RUST), OR UNAUTHORIZED SALVAGING OPERATIONS (E.G., HAMMERING TO SHAPE, REPAIR BY WELDING, STRAIGHTENING, BENDING, ETC.) UNLESS OTHERWISE SPECIFIED.

DISTRIBUTION STATEMENT A. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLIMITED.

SCALE UNIT WT SHEET

DRAWING SIZE B

FORMAT: B_TACOM_ENG_1_0

4 3 2 1

A

B

A

B

DWG NO.

3 OF 8 N/A 1.000

12993884 19200B

GENERAL REQUIREMENTS FOR

QUALITY ASSURANCE PROVISIONS

(SM & MDM CAL WPN SYS)

US ARMY

ARMAMENT RESEARCH, DEVELOPMENT AND ENGINEERING CENTER

PICATINNY ARSENAL, NEW JERSEY 07806-5000

REVISIONS

APPROVEDDATE (YEAR-MO-DA)DESCRIPTIONREVISION

JTD2015-08-11NOR L15S3086 / 2015-08-04H

JTD2016-01-07NOR L15S3135 / 2016-01-05J

E. CTR (CERTIFIED TEST REPORT). IF REQUIRED ON THE DRAWING, THEN A CTR SHALL BE PROVIDED TO THE GOVERNMENT FOR EACH LOT OF PARTS, ASSEMBLIES, SUBSYSTEMS, AND SYSTEMS BY LOT NUMBER PRIOR TO ACCEPTANCE. A CTR IS IN ADDITION TO, AND NOT IN LIEU OF, ANY RIGHTS OF THE GOVERNMENT UNDER CONTRACT OR LAW. A CTR MAY BE USED AS AN ELEMENT INCIDENT TO, BUT SHALL NOT BE USED AS THE SOLE BASIS FOR, GOVERNMENT ACCEPTANCE OF THE CONTRACT ITEM(S), UNLESS SO INDICATED IN THE TECHNICAL DOCUMENTATION OR CONTRACT. AS A MINIMUM, A CTR SHALL CONTAIN THE FOLLOWING:

(1) NAME OF COMPANY AND DATE.

(2) CONTRACT NUMBER OR PURCHASE ORDER NUMBER, NATIONAL STOCK NUMBER, AND DRAWING NUMBER.

(3) COMPLETE NOMENCLATURE OF SUPPLIES TOGETHER WITH LOT NUMBER OR OTHER IDENTIFICATION. THE QUANTITY IN EACH LOT OR SHIPMENT SHALL BE GIVEN.

(4) ALL INSPECTIONS AND TESTS (I.E., MATERIAL, PROCESSES, PERFORMANCE, FUNCTIONAL, ETC.) SHALL BE RECORDED IN THE CTR. THE CTR SHALL IDENTIFY EACH LOT SUBMITTED FOR ACCEPTANCE BY LOT NUMBER, THE SPECIFICATION OR DRAWING, REVISION AND DATE, GRADE OR TYPE AS APPLICABLE, NUMBER OF SPECIMENS TESTED, SPECIFIED CHARACTERISTICS AND REQUIREMENTS, AND ACTUAL RESULTS OBTAINED.

(5) REPORTS OF THE RAW MATERIAL PRODUCER'S CHEMICAL, MECHANICAL, AND PHYSICAL ANALYSES.

(6) A STATEMENT, AS FOLLOWS, CERTIFYING THAT THE MATERIAL MEETS ALL REQUIREMENTS OF THE CONTRACT:

"THE UNDERSIGNED, INDIVIDUALLY, AND AS THE AUTHORIZED REPRESENTATIVE OF THE CONTRACTOR, WARRANTS AND REPRESENTS THAT ALL THE INFORMATION SUPPLIED ABOVE IS TRUE AND ACCURATE. THE MATERIAL COVERED BY THIS CERTIFICATE CONFORMS TO ALL CONTRACT REQUIREMENTS (INCLUDING BUT NOT LIMITED TO THE DRAWINGS AND SPECIFICATIONS), THE INSPECTION AND TEST RESULTS AND THE ANALYSES APPEARING HEREIN ARE TRUE AND ACCURATE, AND THIS CERTIFICATE IS MADE FOR THE PURPOSE OF INDUCING PAYMENT AND WITH KNOWLEDGE THAT THE INFORMATION AND CERTIFICATION MAY BE USED AS A BASIS FOR PAYMENT."

(7) SIGNATURE, DATE OF SIGNATURE, AND TYPED/PRINTED NAME AND TITLE OF CERTIFYING OFFICIAL.

SCALE UNIT WT SHEET

DRAWING SIZE B

FORMAT: B_TACOM_ENG_1_0

4 3 2 1

A

B

A

B

DWG NO.

4 OF 8 N/A 1.000

12993884 19200B

GENERAL REQUIREMENTS FOR

QUALITY ASSURANCE PROVISIONS

(SM & MDM CAL WPN SYS)

US ARMY

ARMAMENT RESEARCH, DEVELOPMENT AND ENGINEERING CENTER

PICATINNY ARSENAL, NEW JERSEY 07806-5000

REVISIONS

APPROVEDDATE (YEAR-MO-DA)DESCRIPTIONREVISION

JTD2015-08-11NOR L15S3086 / 2015-08-04H

JTD2016-01-07NOR L15S3135 / 2016-01-05J

F. COC (CERTIFICATE OF CONFORMANCE). A COC IS REQUIRED FOR MILITARY STANDARD AND COMMERCIAL STANDARD ITEMS, SUPPORTED BY INSPECTION AND TEST DATA, MATERIAL ANALYSES, OR CERTIFICATION FROM THE RAW MATERIAL PRODUCER OR PROCESSOR, AND SHALL BE MADE AVAILABLE TO THE GOVERNMENT FOR SPECIFICATIONS COVERING RAW MATERIAL, PROCESSED MATERIAL, AND PROCESSES. A COC SHALL BE PROVIDED TO THE GOVERNMENT PRIOR TO ACCEPTANCE. THIS IS IN ADDITION TO, AND NOT IN LIEU OF, ANY RIGHTS OF THE GOVERNMENT UNDER CONTRACT OR LAW. A COC MAY BE USED AS AN ELEMENT INCIDENT TO, BUT SHALL NOT BE USED AS THE SOLE BASIS FOR, GOVERNMENT ACCEPTANCE OF THE CONTRACT ITEM(S), UNLESS SO INDICATED IN THE TECHNICAL DOCUMENTATION OR CONTRACT. AS A MINIMUM, A COC SHALL CONTAIN THE FOLLOWING:

(1) NAME OF COMPANY AND DATE.

(2) CONTRACT NUMBER OR PURCHASE ORDER NUMBER, NATIONAL STOCK NUMBER, AND DRAWING NUMBER.

(3) COMPLETE NOMENCLATURE OF SUPPLIES TOGETHER WITH LOT NUMBER OR OTHER IDENTIFICATION. THE QUANTITY IN EACH LOT OR SHIPMENT SHALL BE GIVEN.

(4) A STATEMENT, AS FOLLOWS, CERTIFYING THAT THE MATERIAL MEETS ALL REQUIREMENTS OF THE CONTRACT:

"THE UNDERSIGNED, INDIVIDUALLY, AND AS THE AUTHORIZED REPRESENTATIVE OF THE CONTRACTOR, WARRANTS AND REPRESENTS THAT ALL THE INFORMATION SUPPLIED ABOVE IS TRUE AND ACCURATE, THE MATERIAL COVERED BY THIS CERTIFICATE CONFORMS TO ALL CONTRACT REQUIREMENTS (INCLUDING BUT NOT LIMITED TO THE DRAWINGS AND SPECIFICATIONS), THE ANALYSES APPEARING HEREIN ARE TRUE AND ACCURATE ANALYSES, AND THIS CERTIFICATE IS MADE FOR THE PURPOSE OF INDUCING PAYMENT AND WITH KNOWLEDGE THAT THE INFORMATION AND CERTIFICATION MAY BE USED AS A BASIS FOR SUCH PAYMENT."

(5) SIGNATURE, DATE OF SIGNATURE, AND TYPED/PRINTED NAME AND TITLE OF CERTIFYING OFFICIAL.

G. IF SPECIAL TEST EQUIPMENT IS IDENTIFIED FOR A CHARACTERISTIC, THEN EQUIPMENT CONFORMING TO THAT IDENTIFIED SHALL BE USED, UNLESS AN ALTERNATE IS APPROVED

BY THE CURRENT DESIGN ACTIVITY.

H. 301 THRU 399 - SPECIAL TEST METHOD / SPECIAL SAMPLING PLAN:

(1) STM (SPECIAL TEST METHOD). A DRAWING MAY IDENTIFY AN STM THAT IS UNIQUE TO THE DRAWING. AT A MINIMUM, AN STM SHALL SPECIFY A SAMPLE SIZE, A TEST PROCEDURE OR A GUIDANCE DOCUMENT DETAILING THE TEST PROCEDURE, AND REJECTION CRITERIA. ALL DATA COLLECTED AS A RESULT OF PERFORMING AN STM SHALL BE

SUBMITTED IN THE FORM OF A CTR AS DEFINED HEREIN.

(2) SPECIAL SAMPLING PLAN. A DRAWINGS MAY IDENTIFY A SPECIAL SAMPLING PLAN IN LIEU OF MIL-STD-1916.

SCALE UNIT WT SHEET

DRAWING SIZE B

FORMAT: B_TACOM_ENG_1_0

4 3 2 1

A

B

A

B

DWG NO.

5 OF 8 N/A 1.000

12993884 19200B

GENERAL REQUIREMENTS FOR

QUALITY ASSURANCE PROVISIONS

(SM & MDM CAL WPN SYS)

US ARMY

ARMAMENT RESEARCH, DEVELOPMENT AND ENGINEERING CENTER

PICATINNY ARSENAL, NEW JERSEY 07806-5000

REVISIONS

APPROVEDDATE (YEAR-MO-DA)DESCRIPTIONREVISION

JTD2015-08-11NOR L15S3086 / 2015-08-04H

JTD2016-01-07NOR L15S3135 / 2016-01-05J

I. 501 THRU 599 - DTM (DEFINED TEST METHOD).

(1) ALL DATA COLLECTED AS A RESULT OF PERFORMING A DTM SHALL BE SUBMITTED IN THE FORM OF A CTR AS DEFINED HEREIN. IF A VERIFICATION LEVEL PER MIL-STD-1916 IS IDENTIFIED IN THE CHARACTERISTIC, THEN IT SHALL SUPERSEDE ANY SAMPLE SIZE NOTED IN THE DTM.

(2) TEST SPECIMENS SHALL BE PREPARED FROM ACTUAL PRODUCTION ITEMS OR PARTS OR FROM SCRAPPED/REJECTED PARTS OF THE SAME KIND AND FINISH AND FROM THE SAME PRODUCTION LOT, WHICH HAVE BEEN REJECTED FOR A CAUSE(S) UNRELATED TO THE TEST BEING PERFORMED.

(3) TEST SPECIMENS MAY BE REUSED TO SATISFY MULTIPLE DTM'S, AS LONG AS THE CONDITION OF THE TEST SPECIMENS WILL NOT ADVERSELY AFFECT THE TEST BEING

PERFORMED.

(4) WHEN NOTED BELOW, IF APPROVED BY THE CURRENT DESIGN ACTIVITY, THEN ALTERNATE TEST SPECIMENS (E.G., TEST PANELS, COUPONS, ETC.) MAY BE USED IN LIEU OF

ACTUAL PRODUCTION ITEMS OR PARTS.

(5) IF REQUIRED ON THE APPLICABLE DRAWING, THEN THE FOLLOWING DTM'S SHALL APPLY:

501 - HARDNESS. FIVE (5) ITEMS SHALL BE SELECTED AT RANDOM FROM EACH HEAT TREATMENT BATCH. UNLESS OTHERWISE SPECIFIED ON THE APPLICABLE DRAWING, TESTING SHALL BE PERFORMED IN ACCORDANCE WITH ASTM E18. EACH HEAT TREATMENT BATCH SHALL BE IDENTIFIED AND REMAIN SEGREGATED, UNTIL ALL TESTS ARE COMPLETED. IF ANY ITEM FAILS, THEN THE LOT SHALL BE REJECTED. A HEAT TREATMENT BATCH IS DEFINED AS ITEMS THAT HAVE BEEN HEAT TREATED AT THE SAME TIME IN THE SAME FURNACE AND QUENCH BATH FOR ALL THE PHASES OF THE HEAT TREATMENT PROCESS.

502 - SALT SPRAY TEST. FIVE (5) ITEMS SHALL BE SELECTED AT RANDOM FROM EACH LOT. THE TEST SHALL BE PERFORMED AS SPECIFIED ON THE APPLICABLE DRAWING.

PHOSPHATE TEST PROCEDURES AND EQUIPMENT SHALL HAVE THE PRIOR APPROVAL OF THE GOVERNMENT. IF ANY ITEM FAILS, THEN THE LOT SHALL BE REJECTED. IF APPROVED BY THE CURRENT DESIGN ACTIVITY, THEN ALTERNATE TEST SPECIMENS MAY BE USED.

503 - COATING WEIGHT/THICKNESS. FIVE (5) ITEMS SHALL BE SELECTED AT RANDOM FROM EACH BATCH. THE TEST SHALL BE PERFORMED AS SPECIFIED ON THE APPLICABLE DRAWING. PHOSPHATE TEST PROCEDURES AND EQUIPMENT SHALL HAVE THE PRIOR APPROVAL OF THE GOVERNMENT. IF ANY ITEM FAILS, THEN THE LOT SHALL BE REJECTED. IF APPROVED BY THE CURRENT DESIGN ACTIVITY, THEN ALTERNATE TEST SPECIMENS MAY BE USED.

SCALE UNIT WT SHEET

DRAWING SIZE B

FORMAT: B_TACOM_ENG_1_0

4 3 2 1

A

B

A

B

DWG NO.

6 OF 8 N/A 1.000

12993884 19200B

GENERAL REQUIREMENTS FOR

QUALITY ASSURANCE PROVISIONS

(SM & MDM CAL WPN SYS)

US ARMY

ARMAMENT RESEARCH, DEVELOPMENT AND ENGINEERING CENTER

PICATINNY ARSENAL, NEW JERSEY 07806-5000

REVISIONS

APPROVEDDATE (YEAR-MO-DA)DESCRIPTIONREVISION

JTD2015-08-11NOR L15S3086 / 2015-08-04H

JTD2016-01-07NOR L15S3135 / 2016-01-05J

504 - SUPPLEMENTARY OIL TREATMENT SALT SPRAY TEST. THE TEST SHALL BE PERFORMED FOR FIRST ARTICLE AND AT LEAST SEMI-MONTHLY DURING PRODUCTION.

THREE (3) ITEMS FROM EACH PROCESSING TANK OR DISPENSER SHALL BE PREPARED AND TESTED IN ACCORDANCE WITH EITHER MIL-PRF-3150 OR MIL-PRF-16173. THE

CONTRACTOR SHALL MONITOR AND DOCUMENT TANK QUALITY TO ENSURE CONFORMANCE.

505 - CASE DEPTH. THREE (3) ITEMS SHALL BE SELECTED AT RANDOM FROM EACH DAY'S PRODUCTION FROM EACH CARBURIZING FURNACE OR SALT POT USED. DEFINITIONS AND TESTS PER MIL-W-13855 APPLY. UNLESS OTHERWISE SPECIFIED ON THE APPLICABLE DRAWING, "CASE DEPTH" IN ITS ENTIRETY SHALL REFER TO TOTAL CASE DEPTH.

IF ANY ITEM FAILS, THEN THE LOT SHALL BE REJECTED.

506 - PRIMER DRY FILM THICKNESS. FOUR (4) ITEMS SELECTED AT RANDOM FROM EACH LOT SHALL BE TESTED IN ACCORDANCE WITH MIL-DTL-53072. IF ANY ITEM FAILS, THEN THE LOT SHALL BE REJECTED.

507 - PRIMER ADHESION. FOUR (4) ITEMS SELECTED AT RANDOM FROM EACH LOT SHALL BE TESTED IN ACCORDANCE WITH MIL-DTL-53072. IF ANY ITEM FAILS, THEN THE

LOT SHALL BE REJECTED

508 - CARC DRY FILM THICKNESS. FOUR (4) ITEMS SELECTED AT RANDOM FROM EACH LOT SHALL BE TESTED IN ACCORDANCE WITH MIL-DTL-53072. IF ANY ITEM FAILS, THEN THE LOT SHALL BE REJECTED.

509 - CARC SOLVENT WIPE. FOUR (4) ITEMS SELECTED AT RANDOM FROM EACH LOT SHALL BE TESTED IN ACCORDANCE WITH MIL-DTL-53072. IF ANY ITEM FAILS, THEN THE LOT SHALL BE REJECTED.

510 - CARC ADHESION. FOUR (4) ITEMS SELECTED AT RANDOM FROM EACH LOT SHALL BE TESTED IN ACCORDANCE WITH MIL-DTL-53072. IF ANY ITEM FAILS, THEN THE

LOT SHALL BE REJECTED.

511 - PRIMER / CARC CORROSION RESISTANCE. FOUR (4) ITEMS SELECTED AT RANDOM FROM EACH LOT SHALL BE TESTED IN ACCORDANCE WITH MIL-DTL-53072.IF ANY ITEM

FAILS, THEN THE LOT SHALL BE REJECTED.

512 - PHOSPHATE COATING SUPPLEMENTARY OIL TREATMENT SALT SPRAY TEST. FOUR (4) ITEMS SELECTED AT RANDOM SHALL BE TESTED IN ACCORDANCE WITH

MIL-DTL-16232. IF ANY ITEM FAILS, THEN THE LOT SHALL BE REJECTED.

513 - HYDROGEN EMBRITTLEMENT RELIEF TEST. ADEQUACY OF THE HYDROGEN EMBRITTLEMENT RELIEF TREATMENT SHALL BE DEMONSTRATED IN ACCORDANCE WITH ASTM F519, USING TYPE 1a SPECIMEN. THE FREQUENCY SHALL BE EVERY 120 DAYS UNLESS OTHERWISE INDICATED IN THE APPLICABLE SPECIFICATION.

SCALE UNIT WT SHEET

DRAWING SIZE B

FORMAT: B_TACOM_ENG_1_0

4 3 2 1

A

B

A

B

DWG NO.

7 OF 8 N/A 1.000

12993884 19200B

GENERAL REQUIREMENTS FOR

QUALITY ASSURANCE PROVISIONS

(SM & MDM CAL WPN SYS)

US ARMY

ARMAMENT RESEARCH, DEVELOPMENT AND ENGINEERING CENTER

PICATINNY ARSENAL, NEW JERSEY 07806-5000

REVISIONS

APPROVEDDATE (YEAR-MO-DA)DESCRIPTIONREVISION

JTD2015-08-11NOR L15S3086 / 2015-08-04H

JTD2016-01-07NOR L15S3135 / 2016-01-05J

514 - CASTING INSPECTION. SAMPLING SHALL BE IN ACCORDANCE WITH SAE AMS 2175 UNLESS OTHERWISE SPECIFIED. IF ANY ITEM FAILS, THEN THE LOT SHALL BE

REJECTED.

515 - SMUT TEST. TESTING SHALL BE PERFORMED IN ACCORDANCE WITH MIL-DTL-13924. IF ANY ITEM FAILS, THEN THE LOT SHALL BE REJECTED.

516 - CADMIUM PLATING THICKNESS. FOUR (4) ITEMS SELECTED AT RANDOM SHALL BE TESTED IN ACCORDANCE WITH SAE AMS-QQ-P-416. IF ANY ITEM FAILS, THEN THE

LOT SHALL BE REJECTED.

517 - CADMIUM PLATING ADHESION. FOUR (4) ITEMS SELECTED AT RANDOM SHALL BE TESTED IN ACCORDANCE WITH SAE AMS-QQ-P-416. IF ANY ITEM FAILS, THEN THE

LOT SHALL BE REJECTED.

518 - CADMIUM PLATING CORROSION RESISTANCE. FOUR (4) ITEMS SELECTED AT RANDOM SHALL BE TESTED IN ACCORDANCE WITH SAE AMS-QQ-P-416. IF ANY ITEM FAILS, THEN THE LOT SHALL BE REJECTED.

519 - CADMIUM PLATING EMBRITTLEMENT RELIEF TEST. TESTING SHALL BE PERFORMED IN ACCORDANCE WITH ASTM F519 USING TYPE 1a SPECIMEN. FREQUENCY SHALL BE

IN ACCORDANCE WITH SAE AMS-QQ-P-416.

520 - MAGNETIC PARTICLE INSPECTION. TESTING SHALL BE PERFORMED IN ACCORDANCE WITH ASTM E1444/E1444M UNLESS OTHERWISE SPECIFIED.

521 - SOLID FILM LUBRICANT THICKNESS. FOUR (4) ITEMS SELECTED AT RANDOM FROM EACH LOT SHALL BE TESTED FOR THICKNESS. THE THICKNESS SHALL BE 0.4 TO

1.0 MIL UNLESS OTHERWISE SPECIFIED.

522 - SOLID FILM LUBRICANT ADHESION. FOUR (4) ITEMS SELECTED AT RANDOM FROM EACH LOT SHALL BE TESTED IN ACCORDANCE WITH ASTM D2510, PROCEDURE A. IF

ANY ITEM FAILS, THEN THE LOT SHALL BE REJECTED.

523 - SOLID FILM LUBRICANT CORROSION RESISTANCE. FOUR (4) ITEMS SELECTED AT RANDOM FROM EACH LOT SHALL BE TESTED IN ACCORDANCE WITH ASTM B117. TEST ITEMS SHALL BE EXPOSED TO A 5% SALT SPRAY SOLUTION FOR 100 HOURS MINIMUM. PARTS SHALL SHOW NO MORE THAN THREE (3) RUST SPOTS PER 3" X 6" AREA WITH NONE LARGER THAN 1.0 MM IN DIAMETER. IF ANY ITEM FAILS, THEN THE LOT SHALL BE REJECTED.

SCALE UNIT WT SHEET

DRAWING SIZE B

FORMAT: B_TACOM_ENG_1_0

4 3 2 1

A

B

A

B

DWG NO.

8 OF 8 N/A 1.000

12993884 19200B

GENERAL REQUIREMENTS FOR

QUALITY ASSURANCE PROVISIONS

(SM & MDM CAL WPN SYS)

US ARMY

ARMAMENT RESEARCH, DEVELOPMENT AND ENGINEERING CENTER

PICATINNY ARSENAL, NEW JERSEY 07806-5000

REVISIONS

APPROVEDDATE (YEAR-MO-DA)DESCRIPTIONREVISION

JTD2015-08-11NOR L15S3086 / 2015-08-04H

JTD2016-01-07NOR L15S3135 / 2016-01-05J

524 - ZINC COATING THICKNESS. FOUR (4) ITEMS SELECTED AT RANDOM SHALL BE TESTED IN ACCORDANCE WITH ASTM B633. IF ANY ITEM FAILS, THEN THE LOT SHALL

BE REJECTED.

525 - ZINC COATING ADHESION. FOUR (4) ITEMS SELECTED AT RANDOM SHALL BE TESTED IN ACCORDANCE WITH ASTM B633. IF ANY ITEM FAILS, THEN THE LOT SHALL BE

REJECTED.

526 - ZINC COATING CORROSION RESISTANCE. FOUR (4) ITEMS SELECTED AT RANDOM SHALL BE TESTED IN ACCORDANCE WITH ASTM B633. IF ANY ITEM FAILS, THEN THE

LOT SHALL BE REJECTED.

527 - ZINC COATING EMBRITTLEMENT RELIEF TEST. TESTING SHALL BE PERFORMED IN ACCORDANCE ASTM F519, USING TYPE 1a SPECIMEN. FREQUENCY SHALL BE IN

ACCORDANCE WITH ASTM B633.

528 - CHROMIUM PLATING THICKNESS. FOUR (4) ITEMS SELECTED AT RANDOM SHALL BE TESTED IN ACCORDANCE WITH SAE AMS2460. IF ANY ITEM FAILS, THEN THE LOT

SHALL BE REJECTED.

529 - CHROMIUM PLATING ADHESION. FOUR (4) ITEMS SELECTED AT RANDOM SHALL BE TESTED IN ACCORDANCE WITH SAE AMS2460. IF ANY ITEM FAILS, THEN THE LOT

SHALL BE REJECTED.

530 - CHROMIUM PLATING POROSITY. FOUR (4) ITEMS SELECTED AT RANDOM SHALL BE TESTED IN ACCORDANCE WITH SAE AMS2460. IF ANY ITEM FAILS, THEN THE LOT

SHALL BE REJECTED.

531 - CHROMIUM PLATING HARDNESS. FOUR (4) ITEMS SELECTED AT RANDOM SHALL BE TESTED IN ACCORDANCE WITH SAE AMS2460. IF ANY ITEM FAILS, THEN THE LOT

SHALL BE REJECTED.

532 - CHROMIUM PLATING EMBRITTLEMENT RELIEF TEST. TESTING SHALL BE PERFORMED IN ACCORDANCE WITH ASTM F519 USING TYPE 1a SPECIMEN. FREQUENCY SHALL BE

IN ACCORDANCE WITH SAE AMS2460.