Attachment 0002_SPI_AK16779811.pdf
PDF 3 MB Posted
- Attached to
- Light Capability Rough Terrain Forklift (LCRTF) Spares Federal contract opportunity
- Solicitation number
- SPRDL1-21-R-0091
About this file
This document contains a Special Packaging Instruction (SPI) and related federal contract opportunity. The SPI provides detailed packaging requirements for four hydraulic cylinder assemblies identified by National Stock Numbers and part numbers. Packaging must follow Military Standard 2073-1E for preservation, cleaning, drying, packing, blocking and bracing, wrapping, and marking. The related solicitation seeks the same four hydraulic cylinder assemblies with quantities and options. The solicitation is a small business set-aside using FAR Part 12 procedures, with a response due date of May 5, 2022. The anticipated contract type is firm fixed price. Only the approved source JCB Inc. and small business distributors will be considered for this procurement.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Attachment 0001_SPI_AK16691420.pdf | ||
| SPRDL121R0091.pdf | ||
| Attachment 0003_SPI_AK16780780.pdf | ||
| Attachment_0004_SPI_AK16782296.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 2 Designed using Perform Pro, WHS/DIOR, Jun 97
1BSPECIAL PACKAGING INSTRUCTION
Form Approved OMB No. 0704-0188
-AI
MP
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
400/X1121 (0JKF0) CYLINDER, HYDRAULIC, LINEAR 19207 AK16779811
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
3040-01-677-9811 6-12-2019
7. QUP 8. ICQ 9. UNIT PACK WT (LB.) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)
1 EACH NONE 131.0 4.029 52.0 X 10.3 X 13.0
12. MILITARY PRESERVATION 18.
STEPS
19.
REQD
20.
DESCRIPTION MIL-STD-2073-1E, METHOD 20
13. CLEANING 1-B A/R PRESERVATIVE: OPERATIONAL FLUID
MIL-STD-2073-1E 2-C A/R CAPS/PLUGS: NAS 847
14. DRYING 3-D 1 WRAP: MIL-PRF-121, TY II, SIZE 32 X 50
MIL-STD-2073-1E
15. PACKING
4-E (7) BLOCKING/BRACING: ASTM-D6199
2 4 X 4 X 19-1/4
a. LEVEL A
1 4 X 4 X 12
MIL-STD-129 & NOTE G
2 2 X 4 X 14-1/2
b. LEVEL B
1 2 X 4 X 9-3/4
NOT APPLICABLE 1 2 X 6 X 6-1/8
16. MARKING 5-F 1 CONTAINER: ASTM-D6251, TY III, CL 2, ST A,
MIL-STD-129 SIZE: 49 X 8-3/4 X 7-1/4
17. NOTES/DRAWING
A. INSPECT THE PRESERVATION AND UNIT PACK IN ACCORDANCE WITH MIL-STD-2073-1E. INSPECT THE PACKING IN ACCORDANCE WITH MIL-STD-1186 AND THE APPLICABLE CONTAINER SPECIFICATION.
B. FILL CYLINDER WITH OPERATIONAL FLUID.
C. SEAL ALL OPENINGS TO INTERIOR WITH CAPS/PLUGS OF APPROPRIATE SIZE.
D. WRAP CYLINDER IN PAPER, SECURE WITH TAPE.
E. LUMBER SIZES ARE NOMINAL UNLESS OTHERWISE SPECIFIED, SECURE APPLICABLE BLOCKING TOGETHER AND TO THE INSIDE OF THE CONTAINER USING NAILS/STAPLES CONFORMING TO ASTM-
F1667, SEE PAGE 2.
F. CLOSE CONTAINER IN ACCORDANCE WITH CONTAINER SPECIFICATION ASTM-D6251.
G. THE UNIT CONTAINER IS THE SHIPPING CONTAINER.
DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 2 Designed using Perform Pro, WHS/DIOR, Jun 97
SPECIAL PACKAGING INSTRUCTION (Continuation Sheet)
Form Approved -AI OMB No. 0704-0188 MP
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
400/X1121 (0JKF0) CYLINDER, HYDRAULIC, LINEAR 19207 AK16779811
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
3040-01-677-9811 6-12-2019
17. NOTES/DRAWING
4 X 4 X 19-1/4
QTY 1
FOR CLARITY,
CYLINDER IS SHOWN
WITHOUT PAPER WRAP
4 X 4 X 19-1/4
QTY 1
2 X 4 X 14-1/2
QTY 1
2 X 4 X 14-1/2
QTY 1
2X4 X 9-3/4 IS
CENTERED ON
THE 4X4 X 12
2 X 4 X 9-3/4 4 X 4 X 12
QTY 1 EACH
2 X 6 X 6-1/8
QTY 1
ASSEMBLED
4X4X12 & 2X4X9-3/4
2X6X6-1/8
| SPECIAL PACKAGING INSTRUCTION |
| SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) |
File details come from the government source that posted it. Updated .