Attachment 0001_SPI_AK16691420.pdf
PDF 334 KB Posted
- Attached to
- Light Capability Rough Terrain Forklift (LCRTF) Spares Federal contract opportunity
- Solicitation number
- SPRDL1-21-R-0091
About this file
This document contains a special packaging instruction and a related federal contract opportunity solicitation. The special packaging instruction provides detailed requirements for packaging a hydraulic cylinder including cleaning, preservation, packing, blocking and bracing, marking, and container closure. The related federal contract opportunity is a solicitation to purchase various cylinder assemblies and spares. The solicitation number is provided along with item names, national stock numbers, quantities, part numbers, NAICS code, additional comments on procedures and contract type, and due date of May 2022. Only small business distributors will be considered for this set-aside buy for spares for a light capability rough terrain forklift.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Attachment 0002_SPI_AK16779811.pdf | ||
| Attachment 0003_SPI_AK16780780.pdf | ||
| Attachment_0004_SPI_AK16782296.pdf | ||
| SPRDL121R0091.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 2 Designed using Perform Pro, WHS/DIOR, Jun 97
1BSPECIAL PACKAGING INSTRUCTION
Form Approved OMB No. 0704-0188
-AI
AB
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
332/F7185 (0JKF0) CYLINDER, HYDRAULIC, LINEAR 19207 AK16691420
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
3040-01-669-1420 11-27-2019 -
7. QUP 8. ICQ 9. UNIT PACK WT (LB.) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)
1 EACH NONE 194.2 3.837 51.0 X 10.0 X 13.0
12. MILITARY PRESERVATION 18.
STEPS
19.
REQD
20.
DESCRIPTION MIL-STD-2073-1E, METHOD 20
13. CLEANING 1-B A/R PRESERVATIVE: OPERATIONAL FLUID
MIL-STD-2073-1E 2-C A/R PRESERVATIVE: MIL-PRF-10924G
14. DRYING 3-D A/R CAPS/PLUGS: NAS 847
MIL-STD-2073-1E 4-E 1 WRAP: MIL-PRF-121, TY II, SIZE 24 X 55
15. PACKING
5-F (12) BLOCKING/BRACING: ASTM-D6199
4 2 X 4 X 8-1/2
a. LEVEL A
2 2 X 4 X 8
MIL-STD-129 & NOTE I
4 2 X 4 X 5
2 2 X 8 X 8
6-G (6) BLOCKING/BRACING: A-A55057, TY A
b. LEVEL B
1 7-1/4 X 8 X ¾” THICKNESS
NOT APPLICABLE 1 3-1/2 X 8 X ¾” THICKNESS
1 7-1/4 X 8 X 3/8” THICKNESS
1 3-1/2 X 8 X 3/8” THICKNESS
16. MARKING 2 3-1/2 X 5 X 1/2” THICKNESS
MIL-STD-129
7-H 1 CONTAINER: ASTM-D6880, CL 2, ST 1,
SIZE: 48 X 8-1/2 X 8
17. NOTES/DRAWING
A. INSPECT THE PRESERVATION AND UNIT PACK IN ACCORDANCE WITH MIL-STD-2073-1. INSPECT THE PACKING IN ACCORDANCE WITH MIL-STD-1186 AND THE APPLICABLE CONTAINER SPECIFICATION.
B. FILL CYLINDER WITH OPERATIONAL FLUID.
C. APPLY PRESERVATIVE TO ALL UNPAINTED, UNPLATED METALLIC SURFACES AND TO GREASE (ZERK)
FITINGS.
D. SEAL ALL OPENINGS TO INTERIOR WITH CAPS/PLUGS OF APPROPRIATE SIZE.
E. WRAP CYLINDER IN PAPER, SECURE WITH TAPE.
F. LUMBER SIZES ARE NOMINAL UNLESS OTHERWISE SPECIFIED, SECURE APPLICABLE BLOCKING TOGETHER AND/OR TO THE INTERIOR OF THE CONTAINER USING NAILS/STAPLES CONFORMING TO
ASTM-F1667, SEE PAGE 2.
G. LUMBER SIZES ARE NOMINAL UNLESS OTHERWISE SPECIFIED, SECURE APPLICABLE BLOCKING TOGETHER AND/OR TO THE INTERIOR OF THE CONTAINER USING NAILS/STAPLES CONFORMING TO
ASTM-F1667, SEE PAGE 2.
H. CLOSE CONTAINER IN ACCORDANCE WITH CONTAINER SPECIFICATION ASTM-D6880.
I. THE UNIT CONTAINER IS THE SHIPPING CONTAINER.
DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 2 Designed using Perform Pro, WHS/DIOR, Jun 97
SPECIAL PACKAGING INSTRUCTION (Continuation Sheet)
Form Approved -AI OMB No. 0704-0188 AB
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
332/F7185 (0JKF0) CYLINDER, HYDRAULIC, LINEAR 19207 AK16691420
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
3040-01-669-1420 11-27-2019 2B-
17. NOTES/DRAWING
2 X 4 X 8-1/2
QTY 2
2 X 4 X 8-1/2
QTY 2
2 X 4 X 5
QTY 4
3-1/2 X 5
½” PLYWOOD
QTY 1
7-1/4 X 8
3/8” PLYWOOD
QTY 1
7-1/4 X 8
3/4” PLYWOOD
QTY 1
2 X 8 X 8
QTY 2
2 X 4 X 8
QTY 2
3-1/2 X 8
3/8” PLYWOOD
QTY 1
3-1/2 X 8
3/4” PLYWOOD
QTY 1
3-1/2 X 5
½” PLYWOOD
QTY 1
| SPECIAL PACKAGING INSTRUCTION |
| SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) |
| - |
File details come from the government source that posted it. Updated .