Attaachment 1 - Specifications.docx
DOCX document 20 KB Posted
- Attached to
- DTRA Command and Response Trailers Federal contract opportunity
- Solicitation number
- HDTRA120R0026
- Issued by
- Defense Threat Reduction Agency
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| NEIE Command and Response Trailers QA.docx | DOCX document | |
| AMEMDMENT 1 - Combined Sypnosis and Solicitation - Trailers.docx | DOCX document | |
| Combined Sypnosis and Solicitation - Trailers.docx | DOCX document | |
| Attachment 2 - HDTRA120P0023.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Solicitation # HDTRA120R Attachment 1 - Specifications
CLIN 0001 - One COMMAND TRAILER Basic
- Current model year enclosed trailer (e.g. car hauler, command/response trailer, or equivalent).
- GVWR less than 10,000 lb. (derated for no CDL); GAWR no more than 15,000 lb.
- Exterior dimensions: 8.5' width by at least 22’, but not greater than 28' in length.
- Interior Height: at least 7’ but not greater than 8' interior; min 15” road clearance
- Tongue weight under 1,500 lb.
- All inspections (FMVSS/FMCSR), weight certification, identification data plate, and MCO.
- Operating manuals and configuration drawings/plans (each unit).
- Warranty, 1 year min; provision for local repair without voiding warranty.
Chassis
- 6,000 lb. torsion rubber spring tandem axles; 8 bolt/bolt circle hub for rate (e.g. 8.5 B.C.).
- 4 wheel electric brake (standard 12” x 2”); breakaway switch & battery.
- E-Z lube hub.
- 16 X 6 steel wheels, center cap (3,050 lb. cap ea.), or to accommodate the standard gross weight.
- Include matching spare tire/wheel on exterior mount w/ hydraulic jack & lug wrench.
Tow/trailer
- Extended triple tube A-frame hitch, minimum of 48”.
- Minimum standard, adjustable ht. 3" dia. Pintle hitch (12,000 lb. cap) and 2 5/16” dia. ball coupler w/ safety chains/hooks.
-- Hitch must adjust to truck hitch height to allow tow vehicle variability.
- 7-way RV plug/cord, standard marker/stop/turn/tail lighting (LED), located on exterior by the hitch.
-- Interstate Commerce Commission (ICC) weatherproof connections, marking tape.
- Corner stabilizers (retractable or scissor, but must meet clearance requirement).
- Electric tongue jack, manual crank override (prefer drop leg, rated 4,500-5,000 lb.) w/ sand foot pad.
Structural/Exterior
- Smooth aluminum exterior, white/baked finish, .040, 16” OC framing.
- Walk on roof, .040 one-piece/1/4” ply underlayment, 12” OC roof bow/support, and aluminum drip rail.
-- Anti-skid paint, aluminum ladder to roof (front mount).
- Durable weight, load barring floor, sealed/treated & undercoated.
- Aluminum fender (no plastic/fiberglass).
- Auto enamel, black, painted frame w/ undercoated/rustproofed chassis.
- 24" high ATP stone guard, mud flaps.
- Rear skid plates.
- Stainless steel handrails & low profile slide out step (~ door width) at all entrance doors.
Exterior Door
- 1 32”w x 79”h RV flush lock/deadbolt door, curbside w/ stepwell
- 1 centered rear; RH hinged, or 90”w X 92”h ramp door.
-- Cam lock, spring assist.
-- 2 grab handles (sides), 3 bumpers at contact.
- 2 sliding, screened windows, front mount, no smaller than 24”H x 30”W
Electrical/HVAC/Safety
- 2-7KW gas, quiet generator (e.g. Onan Commercial Quiet). Internal compartment at the front of trailer, lined and vented; accessible from the outside.
-- Remote interior panel (12VDC voltmeter & hourmeter).
- 120/240 VAC 60 amp 1 phase service w/ 60 amp main, 12 space breaker panel.
- Standard 50 amp RV inlet w/ 25' RV shore cord; auto transfer switch (gen to shore).
- Fuel tank w/ gauge (require lock cap & drain valve), ~15-30 gal., roadside fill.
- Commensurate with generator, 100 amp deep cycle batt w/ battery box; 45 amp DC converter battery charger w/controller.
- 12VDC CO/smoke detector.
- 4 120VAC interior duplex receptacle; 2 120VAC exterior GFI duplex receptacle w/weatherproof covers.
- 4 48" LED 12VDC interior lights w/ switch (equivalent lighting/lumen to 48" fluorescent), or equivalent lighting.
- 2 roof mount 13.5K BTU (min, prefer 15K BTU) AC w/heat strip (1500w/5600BTU), 120VAC.
-- Wall mounted thermostat control.
- B:C fire extinguisher (bracket mounted), 5lb.
- Roadside emergency kit with reflective warning devices or triangles.
- Four wheel chocks.
Interior
- Vinyl covered ply wall, vinyl covered ply ceiling, white.
- Spray liner, non-slip, entire floor and ramp door, if standard, or round 'coin' rubber one-piece flooring, black.
Cabinets/storage
- L-shaped base; 36”h X ~96”l (front) & 36”h X ~48”l (left-side); 4 drawer/door, latching.
-- Workbench countertop.
- L-shaped overhead; 24”h X ~96”l (front) & 24”h X ~48”l (left-side); door, latching.
- 2 24”d X 48”l workbench counter top.
-- Mount at 36”h (~ centered above rear axle ea. side).
-- Fold down (w/ supports & latch) or stationary.
Optional add-in:
-Aluminum, horizontal mounting strips, 2-3”D x 20’L, mounted 72” from ground, along both interior walls, to hold up to 20 lbs.
CLIN 0002 – ONE RESPONSE TRAILER
Basic
- Current model year enclosed trailer (e.g. car hauler, command/response trailer, or equivalent).
- GVWR less than 10,000 lb. (derated for no CDL); GAWR no more than 15,000 lb.
- Exterior dimensions: 8.5' width by at least 22’, but not greater than 28' in length.
- Interior Height: at least 7’ but not greater than 8' interior; min 15” road clearance
- Tongue weight under 1,500 lb.
- All inspections (FMVSS/FMCSR), weight certification, identification data plate, and MCO.
- Operating manuals and configuration drawings/plans (each unit).
- Warranty, 1 year min; provision for local repair without voiding warranty.
Chassis
- 6,000 lb. torsion rubber spring tandem axles; 8 bolt/bolt circle hub for rate (e.g. 8.5 B.C.).
- 4 wheel electric brake (standard 12” x 2”); breakaway switch & battery.
- E-Z lube hub.
- 16 X 6 steel wheels, center cap (3,050 lb. cap ea.), or to accommodate the standard gross weight.
- Include matching spare tire/wheel on exterior mount w/ hydraulic jack & lug wrench.
Tow/trailer
- Extended triple tube A-frame hitch, minimum of 48”.
- Minimum standard, adjustable ht. 3" dia. Pintle hitch (12,000 lb. cap) and 2 5/16” dia. ball coupler w/ safety chains/hooks.
-- Hitch must adjust to truck hitch height to allow tow vehicle variability.
- 7-way RV plug/cord, standard marker/stop/turn/tail lighting (LED), located on exterior by the hitch.
-- Interstate Commerce Commission (ICC) weatherproof connections, marking tape.
- Corner stabilizers (retractable or scissor, but must meet clearance requirement).
- Electric tongue jack, manual crank override (prefer drop leg, rated 4,500-5,000 lb.) w/ sand foot pad.
Structural/Exterior
- Smooth aluminum exterior, white/baked finish, .040, 16” OC framing.
- Walk on roof, .040 one-piece/1/4” ply underlayment, 12” OC roof bow/support, and aluminum drip rail.
-- Anti-skid paint, aluminum ladder to roof (front mount).
- Durable weight, load barring floor, sealed/treated & undercoated.
- Aluminum fender (no plastic/fiberglass).
- Auto enamel, black, painted frame w/ undercoated/rustproofed chassis.
- 24" high ATP stone guard, mud flaps.
- Rear skid plates.
- Stainless steel handrails & low profile slide out step (~ door width) at all entrance doors.
Entry Points
- 1 32”w x 79”h RV flush lock/deadbolt door.
-- Curbside w/ stepwell; RH hinged.
- 1 centered rear; RH hinged, or 90”w X 92”h ramp door.
-- Cam lock, spring assist.
-- 2 grab handles (sides), 3 bumpers at contact.
Interior
- Spray liner, non-slip, entire floor and ramp door, if standard, or round 'coin' rubber one-piece flooring, black.
- Vinyl covered ply wall and ceiling, white, if standard.
Cabinets/storage
- 7 steel ~72”h X 48”w x 24”d, shelving units, secured to wall and floor. Full shelving, lining the entire interior sides, with no obstructions to entry points.
-- 4 shelf, end panel, 3”h bin front.
-- 3 mounted curbside, 4 mounted left-side.
Safety
- B:C fire extinguisher (bracket mounted), 5lb.
- Roadside emergency kit with reflective warning devices or triangles.
- Four wheel chocks.
File details come from the government source that posted it. Updated .