Att 1 TRD 4 Jan 23.pdf
PDF 198 KB Posted
- Attached to
- FLIR Cameras/Imagers Federal contract opportunity
- Solicitation number
- FA282323QA013
About this file
This memorandum outlines technical requirements for two infrared imagers to be procured by the Department of the Air Force. Specifically, it seeks one longwave infrared (LWIR) camera with a strained-layer superlattice detector, 7.5-11.5mm spectral range, 1280x1024 resolution, and >45Hz frame rate. It also requires one midwave infrared (MWIR) camera with an indium antimonide detector, 3.0-5.0mm spectral range, and the same resolution and frame rate. Both cameras must have adjustable integration time, Gigabit Ethernet output compliant with GigE Vision 2.0, f/2.5 lens mount, and inclusion of two 25mm and 50mm motorized lenses. Additional requirements include compatible form factor, manual lens compatibility, calibration, documentation, and pelican case delivery. The related solicitation specifies these as a sole source buy of FLIR cameras due to the technical requirements, with questions by February 20th and offers due February 24th through the Department of the Air Force Materiel Command Test Center.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| RFIs 10 Feb 23.pdf | ||
| Att 2 Reps Certs.pdf | ||
| Att 3 SSJ R.pdf | ||
| FA282323QA013 RFQ.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DEPARTMENT OF THE AIR FORCE
HEADQUARTERS 96TH TEST WING (AFMC)
EGLIN AIR FORCE BASE FLORIDA
MEMORANDUM FOR: AFTC/PZIOA 4 Jan 2023
FROM: 782 TS/RNWI
SUBJECT: Government Technical Requirement Document: FLIR 8580 SLS LWIR & 8581 MWIR brand name FLIR Imagers
1. The 782nd Test Squadron (782 TS) Seekers and Sensors Test Flight (RNWI) has a requirement for two (2) Commercial off the Shelf (COTS) Infrared Imagers, one Longwave Infrared (LWIR), and one Midwave Infrared (MWIR) camera.
2. The LWIR (SLS) Imager must meet the following technical requirements.
a. The camera detector type must be Strained-Layer Superlattice (SLS)
b. The camera must have a spectral range from 7.5 μm - 11.5μm or greater
c. The camera detector pitch must be 12 μm
d. The camera resolution must be 1280 x 1024
e. The camera must have a frame rate > 45 Hz at full window
f. The camera must have an adjustable integration time
g. The camera must have a Gigabit Ethernet (GigE) output and be GigE Vision 2.0 compliant.
h.
i. The camera must have a f-number of f/2.5
j. The camera must have the FLIR FPO-M (4-tab bayonet, motorized)
k. The camera must include two (2) motorized lens assemblies (FLIR FPO-M (4-tab bayonet, motorized)) with a f-number of f/2.5 and an equivalent focal length (EFL) of
i. 25 mm
ii. 50 mm
l. The camera without the lens must weigh no more than 3.4 kilograms(8.5lbs)
m. The camera without the lens should not exceed the dimensions [L x W x H] 8.9 x 4.6 x
5.3 inches.
n. The camera must be compatible with manual focus lenses
o. The camera system must include a power supply
p. The camera system must be calibrated prior to delivery
q. The camera system must include an operation manual
r. The camera system must be delivered a Pelican style case
3. The MWIR Imager must meet the following technical requirements.
a. The camera detector type must be Indium Antimonide (InSb)
b. The camera must have a spectral range to 3.0 – 5.0 μm
c. The camera detector pitch must be 12 μm
d. The camera resolution must be 1280 x 1024
e. The camera must have a frame rate > 45 Hz at full window
f. The camera must have an adjustable integration time
g. The camera must have a Gigabit Ethernet (GigE) output and be GigE Vision 2.0 compliant.
h.
i. The camera must have a f-number of f/2.5
j. The camera must have the FLIR FPO-M (4-tab bayonet, motorized)
k. The camera must include two (2) motorized lens assemblies (FLIR FPO-M (4-tab bayonet, motorized)) with a f-number of f/2.5 and an equivalent focal length (EFL) of
i. 25 mm
ii. 50 mm
l. The camera without the lens must weigh no more than 3.4 kilograms(8.5lbs)
m. The camera without the lens should not exceed the dimensions [L x W x H] 8.9 x 4.6 x
5.3 inches.
n. The camera must be compatible with manual focus lenses
o. The camera system must include a power supply
p. The camera system must be calibrated prior to delivery
q. The camera system must include an operation manual
r. The camera system must be delivered a Pelican style case
File details come from the government source that posted it. Updated .