Att_1_Specifications.pdf
PDF 134 KB Posted
- Attached to
- Loader-Mount Snow Blower Federal contract opportunity
- Solicitation number
- 140P8423Q0060
About this file
This document contains specifications for a two stage loader mount snow blower for the National Park Service Pacific West Region. Key details include: the snow blower must meet Tier 4 emissions standards and produce a minimum of 500 horsepower from its diesel engine. It must be capable of processing 4,000 tons of snow per hour with a discharge distance of 80 to 150 feet. The snow blower width cannot exceed 120 inches and height cannot exceed 60 inches. It must include a rotatable and hydraulically controlled discharge chute. The drive train is required to use single ratio gearboxes with driveshafts and mechanical disconnects without clutches or chain/belt drives. The snow blower must be compatible for use on John Deere 644K and 644 X-Tier loaders under 50,000 pounds and include provisions for diagnostics, fluid drainage, adjustable landing gear, abrasion resistant cutting bars and edges, paint, spare shear pins and manuals.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Sol_140P8423Q0060.pdf | ||
| Att_2_52_212-3_Full_Text_(Dec_2022).pdf | ||
| Att_3_Past_Performance_Form.docx | DOCX document |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Attachment 1 RFQ No. 140P8423Q0060
SPECIFICATIONS
TWO STAGE LOADER MOUNT SNOW BLOWER
Engine and Fuel System Emissions U.S. EPA Tier 4 Final emissions standards compliant Horsepower Minimum 500 hp Engine Cooling Arctic formula coolant to -50 degrees F; Silicon Hoses
Air Intake Cannot be blocked by snow or ice under extreme conditions
Engine Fuel Diesel #2, with spin on type engine filter Engine Block Heater 110V input Engine Coolant Fan Not to be impeded by air flow or snow/ice
| Machine | Weight, |
| Dimensions | and |
Capacities
Operating weight Not to exceed 16,000 lbs. with full fuel and oil Snow processing Minimum 4,000 tons per hour Overall machine width, working Not to exceed 120 inches (10 ft.)
Overall machine height, working Not to exceed 60 inches (5 ft.)
Discharge chute Rotatable, hydraulically actuated and controlled Casting Distance Minimum 80 ft., maximum 150 ft.
Drive Train/Blower Function
Ribbons Not to exceed 48-inches (4 ft.) diameter; serrated or smooth
Power Transfer
(a) Single ratio gearboxes with driveshafts (b) Mechanical disconnect for servicing or shear pin replacement (c) No clutch (d) No chain or belt drives
Hydraulic System On-board, self-contained, with spin-on filters; suitable for cold climate
Cast Angle Minimum 45 degrees from vertical to each side Control/Connectivity Machine Control Operated from loader cab
Control of Rotary to Loader Control console with high resolution control screen and joystick
Blower to Loader Mount JRB Quick Coupler, Volvo 120 Standard, verify loader standoff for contact with blower. Extension blanks may be required.
Loader Compatibility Compatible with John Deere 644K (Powerllel Lift System) and 644 X-Tier (Z-Bar) loaders weighing less than 50,000 lbs.
Attachment 1 RFQ No. 140P8423Q0060
Electrical
Electrical System 12V or 24V or combination, high capacity alternator, cold weather package by manufacturer.
Start Capacity 800 CCA Minimum, 1000 CCA preferred.
Engine Starter 24V Work Lights Minimum two LED work lights Master Disconnect Included Battery Charger 110 V input, converted to 12/24 volt General
Diagnostics Provision for all connection hardware and software, including two-year subscription to manufacturer software upgrades for diagnostic purposes of all electronic systems.
Engine Cowling Swing doors with struts for ease of maintenance access
Parts Availability
From the date of Blower purchase, the Manufacturer shall:
(a) Ensure that all parts are to be standardized and available from the manufacturer for a minimum period of 10 years. (b) Maintain records of all parts and specifications for a minimum period of 10 years for the purpose of replicating OEM parts. (c) Maintain the capability to deliver repair parts and assemblies within two weeks of ordering.
Fluid Service All fluid reservoir drains shall be remote mounted to allow fluid draining from one side of machine
Landing Gear Replaceable skid shoes with adjustable height. Abrasion resistant, non-carbide. One spare set shall be included.
Paint All exposed parts painted to prevent corrosion.
Vertical Side Cutting Bars Included
Shear Pin Protection
Minimum: (a) Between ribbons and final drive t-gear box;
(b) Between impeller fan and clutch or drive train; (c) Between engine and drive train or clutch. (d) Qty 100 of each type of shear pin shall be included.
Cutting Edges/Scraper Blades
(a) Minimum 1-inch thick AR steel alloy; bolt-on. (b) Reversible (c) Replaceable (d) One spare set shall be included.
Manuals
One set of Operation, Parts, and Service manuals in English language (print format); One set of Operation, Parts, and Service manuals in English language (electronic format)
Warranty Minimum one year
File details come from the government source that posted it. Updated .