Clad Commercial Door

ALUMINUM CLAD WOOD COMMERCIAL DOOR

PART 1 GENERAL

1.1 SECTION INCLUDES

A. Aluminum clad wood commercial door and frame, complete with hardware, glazing, weather strip, simulated divided lite, stationary sidelites, and standard or specified anchors, trim, and attachments.

Include only those reference standards that are referred to within the text of this section. Edit for project conditions.

A. WDMA I.S.4: Industry Standard for Water Repellent Preservative Treatment for Millwork.

B. Sealed Insulating Glass Manufactures Association / Insulating Glass Certification Council (SIGMA / IGCC).

C. American Architectural Manufacturers Association (AAMA): 2605: Voluntary Specification for High Performance Organic Coatings on Architectural Extrusions and Panels.

D. National Fenestration Rating Council (NFRC): 101: Procedure for Determining Fenestration Product Thermal Properties.

1.2 SUBMITTALS

A. Samples:

1. Submit corner section.

2. Include glazing system, quality of construction, and specified finish.

B. Quality Control Submittals: Certificates: Submit manufacturers certifications indicating compliance with specified performance and design requirements.

C. DELIVERY

A. Deliver in original packaging and protect from weather.

1.3 QUALITY ASSURANCE

Include the following article only for projects including egress requirements. Edit applicable building code.

A. Regulatory Requirements: Emergency Egress or Rescue: Comply with requirements of IBC International Building Code.

1.4 WARRANTY

The following limited warranty is subject to conditions and exclusions. There are certain conditions or applications over which Marvin has no control. Defects or problems as a result of such conditions or applications are not the responsibility of Marvin. For a more complete description of the Marvin limited warranty, refer to the Marvin Windows and Doors Ten-Year Limited Warranty.

A. Doors shall be warranted to be free from defects in manufacturing, materials, and workmanship for a period of ten (10) years from purchase date.

B. Insulating glass shall be warranted against visible obstruction through the glass caused by a failure of the insulating glass air seal for a period of twenty (20) years from the date of orginal purchase.

C. Please see separate manufacturer warranties for Commercial Door hardware components, sills and steel frames.

PART 2 PRODUCTS

2.1 MANUFACTURED UNITS

1. Description: Factory assembled aluminum clad Commercial Door, as manufactured by Marvin Windows and Doors, Ripley, Tennessee. Each unit provided shall have a maximum U-factor of .35 and be Energy Star certified.

2.2 FRAME DESCRIPTION

A. Finger jointed, edge-glued pine core with clear pine veneer; finger jointed Douglas fir core with clear Douglas fir veneer, finger jointed, edge-glued white oak core with clear white oak veneer; finger jointed, edge-glued cherry core with clear cherry veneer; finger jointed, edge-glued mahogany core with clear mahogany veneer; finger jointed, edge-glued vertical grain Douglas fir core with clear vertical grain Douglas fir veneer.

1. Kiln dried to a moisture content no greater than twelve (12) percent at the time of fabrication.

2. Water repellent, preservative treated in accordance with WDMA I.S.4.

B. Frame width: 4-9/16 inches (116 mm); 6-9/16 inches (167 mm).

C. Frame thickness: 1-1/16 inches (27 mm).

D. Exterior extruded aluminum clad 0.050 inch (1.3 mm) thick.

E. ADABAG compliant threshold.

PANEL DESCRIPTION

A. Stiles: finger jointed, edge-glued LVL. Rails: finger jointed, edge-glued pine with clear pine veneer.

B. Stiles contain laminated veneer lumber (LVL) core with clear pine veneers.

C. Composite panel thickness: 1-3/4 inches (44mm).

D. Exterior extruded aluminum clad 0.055 inch (1.4 mm) thick.

E. Top rail width: 1 ¾ inch panel 6 inches (152 mm).

F. Stile width: 6 inches (152 mm).

G. Bottom rail height: 11-3/8 inches (289 mm).

H. Panel corners glued and fastened with 5/8 X 4 inch (16 mm X 102 mm) fluted hardwood dowels. Removable interior vinyl glazing stops with clear wood covers; no visible fastener holes.

2.4 GLAZING

A. Select quality complying with ASTM C 1036. Comply with 16 CFR 1201 Safety Standard for Architectural Glazing Materials. Tempered insulating glass IGMA/IGCC certified to performance level CBA when tested in accordance with ASTM E 774.

B. Glazing Method: Tempered Insulating Glass (Altitude Adjusted).

C. Glass Type: Clear; Low E II—Air.

D. Glazing Seal: Silicone bedding, exterior.

2.5 FINISH

A. Interior: Treated bare wood.

2.6 HARDWARE

2.7 WEATHER STRIP

A. Head jamb and side jambs to have two sets of bulb weather strip, locking stiles have pile weather strip maintaining contact with door panels.

2.8 SIMULATED DIVIDED LITES (SDL)

A. 7/8 inch (22 mm) wide; 1 1/8 inch (29 mm) wide Internal spacer bars.

1. Exterior muntins: Extruded aluminum 0.055 inch (1.4 mm) thick.

2. Interior muntins: Pine. SDL adhered to glass with closed-cell copolymer acrylic foam tape.

3. Pattern: Rectangular.

4. Finish: Match panel finish.

2.9 ACCESSORIES AND TRIM

A. Installation and Hardware Accessories:

1. Factory installed vinyl nailing fin/drip cap.

END OF SECTION

1.