Marked_Truck_Specifications.DOCX

LEO-TRUCK PACKAGE:

1. LIGHT BAR: Whelen Legacy Lightbar #GB8SP3 48” or GB2SPS 54” Lightbar depending on the vehicle. Light bar with flashing LED TD’s and alleys, 16 LED modules, red drivers, blue passengers and vehicle mount kit included.

2. REAR WINDOW FLASHING LIGHTS: nFORCE 4 module #ENFTCDGS1204 Interior Traffic Controller w/ mounting Bracket. 12 LEDs – dual color, Blue, Red & White which can be work lights or flood lighting, 34 flash patterns and 8 arrow patterns. Will be mounted in the inside rear window.

3. REAR FLASHING LIGHTS LED WITH LICENSE PLATE BRACKET: Mpower Part number EMPS2STS5RBW 4” Fascia Light w/stud mount, 18” hard wire w/sync option, black housing, 18 LED, TriColor red/blue/white.

4. SWITCH BOX CONTROLLER: Whelen # CCSRN3 With a 3-Position Slide switch and 18 push button control heads. Control box will be wired into the vehicles dash light dimmer switch. Control box display lights will match the instrument light brightness. The control box will be wired to the horn button. When slide switch position 1 thru 3 is selected the horn button will activate the siren or air horn function when the horn is pressed.

A. Three stage slide type light control for light bar operation.

Slide Switch Position 1 – Rear light Bar- RED/BLUE flashers, All Rear LED and Hide-a-way, SoundOFF ELUC2S010 Corner light Strobes. To include inside rear LED flashing slim light. Slide Switch Position 2 – (To include all of Position 1 functions) PLUS- Front light bar Center LED Red/Blue flashing lights.

Slide Switch Position 3 – (To include all of Positions 1&2 functions), PLUS- Front LED flashing Red/Blue oscillating and intersection sweep lights, siren, and headlight flasher wig-wags. Siren will shut off when vehicle is placed in park and door is opened.

B. Six push button style control position functions: (Left to Right) Button one – Left Alley Button two – Right Alley Button three –Take-downs (Front clear steady lights) Button four – Wig –Wag front flasher lights and Front Red/ Blue Grill lights Button five – Flashing- Light bar LED rear center flashing lights Button six – Spot light

5. WIG- WAG FRONT HEADLIGHT FLASHERS AND HIDE-AWAY Corner LED Lights: Install Two (2) SoundOff Part# ELUC2S025W (White) and two (2) SoundOff Part# ELUC2S025R (Red) LED With a 25' cable for headlight assembly. Each front headlight and rear taillight will have a LED light installed inside the lens area with good visibility. If the vehicle will not accept inserts or the Wig – Wag function in the head light / High beam Light assembly use nFORCE model # ENFSGS3RW and model # ENFSGS312BW 12 LED Dual Color along with, Whelen Flasher model # ULF44, mounted in the grill. “Red/White in the center of the grill on the Driver’s side and Blue/White in the center of the grill on the Passenger side, to create a Wig Wag with a solid burn option for Take downs or Scene lighting.

6. SPOT LIGHT: Go Light Remote Wireless Spotlight, when mounted, will not interfere with takedown lights on light bar.

7. SECURITY PARTITION TRANSPORT HALF CAGE W/GUN LOCKS AND MOUNTS: installed behind front passenger side seat in rear passenger sitting area. The partition cage will be able to hold ONE prisoner and will be manufactured of tube steel framing and sheet metal plating to prevent prisoner kicking and escape. The cage will be installed and bolted to the vehicle floor and extend to the vehicles roof. The upper half of the cage facing the front of vehicle will be steel mesh screen for ventilation purposes. The side of cage facing the rear driver side rear door will be made of Plexiglas to prevent bodily fluids to come in contact with the officer. There will be a security metal screen or heavy duty Plexiglas attached to the rear window of the vehicle inside of cage. There will be a security metal screen or heavy duty Plexiglas attached to the passenger rear inside side door frame around the window. The windows must still be able to work properly when screens or Plexiglas are installed.

8. GUN LOCKS AND MOUNTS: Weiser WEI-004 Dual rail weapons rack mounted to the partition wall with dual SC-5 handcuff keyed locks. Gun rack must accommodate optics light systems, shotguns with extended magazine tubes, extended forends and tactical stocks. LOCKS MUST properly fit both weapons prior to leaving vendor. One switch will operate both locks with key opening ability. Switch to be wired to the ignition with a 10 sec delay timer and will operate on the ACC or ON position. Switch will not be wired HOT. Switch to be hidden and located on the REAR area of console. Rifle mounted on driver side, shotgun mounted on passenger side.

9. IDLE SWITCH: Secure-Idle System; install secure idle switch manufactured by Secure-Idle Inc. (anti-theft@secure-idle.com) (phone: (309) 475-2286). Officer should be able to put the vehicle in “Park”, push the button on the Secure-Idle System on the dashboard, turn the ignition off and remove the key while the vehicle’s engine keeps running. Engine should stop running if someone attempts to drive vehicle without the ignition key. To deactivate, insert the key and turn the ignition to the “on” position. Push button switch shall be installed on dash board to left side of steering column and easily accessible to driver.

10. CENTER CONSOLE W/POWER OUTLETS: Troy Product console can be 16” to 21” will be used to best accommodate the officers specific needs. Instrument console shall be of metal construction with floor mounts and universal face- plates, and INTERNAL drink cup holder. Power Outlets: ABLE-2 (part # 14.0570), or comparable. Three 12-volt DC power outlet and a Dual USB outlet. Forest Service Rep will show vendor where they will be located on the center console. Small dome light mounted above the center console, red/white light.

11. WIRING: 2nd Generation Patrol Power Company, part number PPGEN2 with brackets. Wiring harness with adjustable power timer, will be specific to vehicle being installed (Avail Ford, Dodge, Chevy). http://www.patrol-power.com. Minimum 2 circuits 8 gauge wiring. This set up will eliminate the need for a master switch.

This set up will eliminate the need for a master switch. The timer will be set to 1 hr.

12. CELL PHONE KIT: Wireless Amplifier Cradle Kit; install Weboost wireless Amplifier Cradle Kit, part number 801213. The kit includes a 3 watt amplifier and universal cell phone cradle. The amplifier and all wiring shall be concealed. Antenna for this kit shall be from Wilson Electronics, part number 301104, which is a 4.9 dBi gain NMO mount antenna and requires part number 901102 that includes a ¾” roof mount, 14 feet of RG-58U cable and female connector. The antenna will be mounted in the center of the roof approximately 2 feet from the rear of the vehicle to allow for easy removal by the driver. Also include Wilson Electronics part number 991107, which is a spring for the antenna. The kit should be powered through the vehicle’s ignition. Location of the cell phone cradle will be determined once vehicles are received from the manufacturer.

Address: Weboost 3301 E. Deseret Drive St. George, Utah 84790 Phone 435-986-6212

13. MOBILE RADIO WIRE HARNESS: customized installation of Forest Service radio. Radio model will be provided by the FS. When radio is provided install FS radio in center console, when radio is not provided proper wiring and connections will be installed by contractor wire HOT to vehicle battery. 3 coax cables will be ran for radio antennas w/rain caps.

14. PUSH BAR BUMPER WITH FLUSH MOUNTED LED LIGHTS: Setina Standard Part # PB450L Series 2” upper crossbar tube, aluminum only. Heavy duty push bumper, color Black, mounted to frame. Code 3 Part # TRX6RB TREX LED split red/blue modules 3.85L x 1.8W x 1.34D, 27 flash patterns.

15. 100 WATT SPEAKER: Code 3 Part# C3100U 100 watt speaker with bracket included. Mounted inside grill underneath hood, speaker will be facing forward.

16. FIRE EXTINGUISHERS w/vehicle mounting brackets: 2.5lb & 5lb: Amerex (part # AX417T), 2.5 pound UL rating 3A40BC multipurpose dry chemical. Securely mount on passenger side of driver compartment. Location to be verified by Technical Contact at time of installation. Fire Extinguisher : (Amerex A500T), 5 pound UL rating 3A40Bc multi-purpose dry chemical. Mounted in rear storage area, right side behind wheel well or other accessible practical area.

17. POWER INVERTER: THOR (TH750 inverter) minimum 600 watts with 120 volt. Extension Receptacle mounted behind the passenger seat, plugs facing the driver side. Inline fuse to be installed on hot side wire to unit.

18. LOCK BOX FOR BED OF TRUCK ALL WEATHER: Tuffy Security Products Part #257 This box needs to be designed for the outdoor use, extremely weather resistant and have a combo/key lock drawers. Box needs to be rated at 2000 lbs on top. Durable powder coat finish color Black. 2 drawers 50/50 split.

19. Rechargeable LED flashlight: INOVA TR4 lithium ion powered rechargeable LED flashlight.

20. DECALS: Application of reflective decal package and door shield (per FSM 5380). Reflectorized decal material must meet USFS specifications. ALL DECALS PROVIDED BY CONTRACTOR.

Decal specifications for White Vehicles:

1. Decal materials to be made of Scotchlite 3M Reflective or NON reflective

2. Door decal to be a 10” shield White background with Brown lettering and trim

3. Vehicle number to be located under shield on each door

4. Vehicles will have a 4” Green reflective or NON reflective striping installed in both sides and the rear of the vehicle. There will be 3” White reflective or NON reflective lettering (LAW ENFORCEMENT) both sides installed on green stripe above front fender area. (LAW ENFORCEMENT) will be placed on green stripe on rear of vehicle on the driver side.