Attachment_2_-_Davis_Bacon_Wage_Determinations.pdf

Davis Bacon Wage Determinations

Mandan, ND Pavement Repair Project

General Decision Number: ND160002 01/08/2016 ND2

Superseded General Decision Number: ND20150002

State: North Dakota

Construction Type: Highway

Counties: North Dakota Statewide.

HIGHWAY CONSTRUCTION PROJECTS

Note: Under Executive Order (EO) 13658, an hourly minimum wage of $10.15 for calendar year 2016 applies to all contracts subject to the Davis-Bacon Act for which the solicitation was issued on or after January 1, 2015. If this contract is covered by the EO, the contractor must pay all workers in any classification listed on this wage determination at least

$10.15 (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the contract in calendar year 2016. The EO minimum wage rate will be adjusted annually. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

Modification Number Publication Date

0 01/08/2016

ELEC0714-002 06/29/2015

ADAMS, BILLINGS, BOTTINEAU, BOWMAN, BURKE, BURLIEGH, DIVIDE,

DUNN, EMMONS, GOLDEN VALLEY, GRANT, HETTINGER, MCHENRY,

MCKENZIE, MCLEAN, MERCER, MORTON, MOUNTRIAL, OLIVER, PIERCE,

RENVILLE, ROLLETTE, SHERIDAN, SOIUX, SLOPE, STARK, WARD, &

WILLIAMS COUNTIES:

Rates Fringes

ELECTRICIAN

CABLE SPLICER...............$ 33.29 10.5%+8.62

ELECTRICIAN.................$ 32.89 10.5%+8.62

ELEC0714-003 12/01/2014

LINE CONSTRUCTION:

Line Construction

CABLE SPLICER...............$ 34.15 29.5%+5.00

GROUNDMAN...................$ 21.78 29.5%+5.00

LINE EQUIPMENT OPERATOR.....$ 32.67 29.5%+5.00

LINEMAN.....................$ 36.30 29.5%+5.00

ELEC1426-002 06/01/2014

BARNES, BENSON, CAVALIER, DICKEY, EDDY, FOSTER, GRAND FORKS,

GRIGGS, KIDDER, LAMOURE, LOGAN, MCINTOSH, NELSON, PEMBINA,

RAMSEY, RANSOM, RICHLAND, SARGENT, STEELE, STUTSMAN, TOWNER,

TRAILL, WALSH, & WELLS COUNTIES:

ELECTRICIAN

CABLE SPLICER...............$ 28.30 11.26

ELECTRICIAN.................$ 27.59 11.37

ENGI0049-001 10/01/2015

Power equipment operators:

GROUP 1.....................$ 27.25 14.85

GROUP 2.....................$ 26.35 14.85

GROUP 3.....................$ 26.10 14.85

GROUP 4.....................$ 25.95 14.85

GROUP 5.....................$ 25.10 14.85

GROUP 6.....................$ 23.80 14.85

POWER EQUIPMENT OPERATORS CLASSIFICATIONS

GROUP 1: All Cranes 60 tons and over, Cranes doing piling, sheeting, dragline/clam work, Derrick(Guy & Stiff), Gentry

Crane Operator, Helicopter Operator, Mole Operator or

Tunnel Mucking Machine, Power Shovel 3-1/2 CY. and over and

Traveling Tower Crane.

GROUP 2: All Cranes 21 tons and up to 59 tons, Backhoe

Operator 3 CY. and over, Creter Crane, Dredge Operator 12' and Over, Equipment Dispatcher, Finish Motor Grader, Front

End Loader Operator 8 CY. and over, Master Mechanic (When supervising 5 or more Mechanics), Mon-o-rail Hoist

Operator, Power Shovel up to and including 3-1/2 CY. and

Tugboat.

GROUP 3: Cranes 20 tons and under, Asphalt Paving Machine

Operator, Asphalt Plant Operator, Automated Grade Trimmer, Backhoe Operator 1 CY. up to and including 2-1/2 CY., Boom

Truck Hydraulic (8 Tons & over), Cableway Operator, Concrete Batch Plant Operator(electronic or manual), Concrete Mixer Paving Machine Operator, Concrete Paver-

Bridge Decks, Concrete Pump, Concrete Spreader Operator &

Belt Placer, Crushing Plant Operator, Dozer Operator, Dredge Operator or Engineer 11'' and under, Drill Rigs, Heavy Duty Rotary or Chum or Cable Drill, Front End Loader

(3-1/2 CY. up to and including 7-1/2 CY.), Gravel Washing &

Screening Plant Operator, Locomotive, all types, Mechanic or Welder(heavy duty), Motor Grade Operator, Pavement

Breaker (Non-Hydro Hammer type, Pipeline Wrapping, Cleaning

& Bending Machine Operator, Power Actuated Auger and

Horizontal Boring Machine Operator 6'' and over, Refrigeration Plant Engineer, Roto Milling Machine (Surface

Planer) 43'' & over, Scraper Operator, Slip Form Concrete

Paving Operator, Tandem Pushed Quad 9 or similar, Tractor with Boom Attachment, Trenching Machine- 100 HP. and over.

GROUP 4: Articulated/Off Road Hauler, Asphalt Dump Person, Asphalt Paving Screed Operator, Backhoe - up to and including 1/2 CY., Boring Machine locator, Console Board

Operator, Distributor Operator (Bituminous), Forklift

Operator, Front End Loader- 1-1/2 CY. up to and including 3

CY., Grade Person, Gravel Screening Plant Operator (not

Crushing or Washing), Greaser, Lazer-Screed Operator, Longitudinal Float and Spray Operator, Micro surfacer

Machine, Motor Grade Operator-Hual Roads, Paving Breaker-

Hydro Hammer Type, Pugmill Operator, Push Tractor, Roller, Steel & Rubber on Hot Mix Asphalt Paving, Rotomill Machine

(Surface Planer), up to and including 42'', Rumble Strip

Machine, Sand and Chip Spreader, Self-propelled Sheepsfoot

Packer with or without Blade attachment, Self-propelled

Traveling Soil Stabilizer, Sheepsfoot Packer with Dozer attatchment- 100 HP and over, Shouldering Machine, Slip

Form, Curb & Gutter Operator, Slurry Seal Machine, Tamping

Machine Operator, Tie Tamper and Ballast Machine, Trenching

Machine Operator- 46 HP up to and including 99 HP, Truck

Mechanic, Well Points, Tub Grinder, Fuel/Lube Operator.

GROUP 5: Boom Truck- A- Frame or Hydraulic 2 tons up to and including 7 tons, Broom-Self propelled, Concrete Saw (Power

Operated), Cure Bridge Operator, Front End Loader Operator, less than 1-1/2 CY., Mobile Cement Mixer, Power Actuated

Auger & Horizontal Boring Machine Operator up to and including 5", Roller, on other than Hot Mix Asphalt Paving, Oilers, Vibrating Packer Operator (Pad Type)

Self-propelled, Water Spraying Equipment-Self Propelled, Skidsteer Operator with Attachments.

GROUP 6: Brakeman or Switchman, Curb Machine Operator

(Manuel), Dredge or Tugboat Deckhand, Drill Truck

Gravel/Testing Operator, Form Trench Digger (Power), Gunite

Operator Gunall, Paint Machine Striping Operator, Pick-up

Sweeper, 1CY. & over Hopper Capacity, Scissor Jack-Self

Propelled Platform Lift, Straw Mulcher and Blower, Stump

Chipper Operator, Tractor Pulling Compaction or Aerating

Equipment, Trenching Machine Operator- up to and including

45 HP., Assistant/Apprentice Operator.

* TEAM0638-002 10/01/2015

TRUCK DRIVER

Euclid over 20 yds..........$ 28.62 11.60

Single Axle Trucks..........$ 26.67 11.60

Tandem Tri Axle Semi, Low

Boy and Off Road Heavy

Duty End Dumps 20 yds & under.......................$ 27.10 11.60

Tandem Tri/ Axle Truck......$ 26.79 11.60

SUND2015-001 09/16/2015

Electrician

Cass County.................$ 14.72 3.40

CARPENTER........................$ 27.10 5.60

Cement Mason/Finisher............$ 27.10 5.60

Laborers:

GROUP 1:....................$ 19.50 1.70

GROUP 2.....................$ 19.75 1.70

GROUP 3.....................$ 19.90 1.70

GROUP 4.....................$ 20.65 1.70

LABORERS CLASSIFICATIONS

GROUP 1: General Construction Laborers: Sack Shaker (cement and mineral filler): Pipe Handler: Drill Runner Tender:

Salamander Heater and Blower Tender, Light truck, Pickup

Driver, Flaggers and Pilot Car Drivers.

GROUP 2: Semi Skilled Laborer: Bulk Cement Handler: Conduit

Layer, Telephone or Electrical: Form Setter (pavement): Gas

Electric or pneumatic tool operator: Chipping Hammer, Grinders and Paving Brakers (tamper-drit) Concrete Vibrator

Operator: Chain Saw Operator: Concrete Saw Operator:

Concrete Curing Man (not water): Bituminous worker

(Shoveler, Dumper, Raker and Floated): Kettleman

(bituminous or lead): Concrete Bucket Signlman: Power Buggy

Operator: Brick and Mason Tender: Multiplate Pipelayer:

Culvert Pipe Layers: Carpenters Tenders.

GROUP 3: Caisson Worker: Bottom Man (sanitary sewer, storm sewer water and gas liners): Concrete Mixer Operator (one bag capacity): Mortar Mixer.

GROUP 4: Pipe Layers (sanitary sewer, storm sewer, water and gas lines): Drill runner (includes Wagon Churn or Air

Track) Powderman, Gunite and Sandblast, Nozzleman, Reinforcing Steel Setters/Tiers, Concrete Finishers

Tender.

WELDERS - Receive rate prescribed for craft performing operation to which welding is incidental.

Unlisted classifications needed for work not included within the scope of the classifications listed may be added after award only as provided in the labor standards contract clauses

(29CFR 5.5 (a) (1) (ii)).

The body of each wage determination lists the classification and wage rates that have been found to be prevailing for the cited type(s) of construction in the area covered by the wage determination. The classifications are listed in alphabetical order of "identifiers" that indicate whether the particular rate is a union rate (current union negotiated rate for local), a survey rate (weighted average rate) or a union average rate

(weighted union average rate).

Union Rate Identifiers

A four letter classification abbreviation identifier enclosed in dotted lines beginning with characters other than "SU" or

"UAVG" denotes that the union classification and rate were prevailing for that classification in the survey. Example:

PLUM0198-005 07/01/2014. PLUM is an abbreviation identifier of the union which prevailed in the survey for this classification, which in this example would be Plumbers. 0198 indicates the local union number or district council number where applicable, i.e., Plumbers Local 0198. The next number, 005 in the example, is an internal number used in processing the wage determination. 07/01/2014 is the effective date of the most current negotiated rate, which in this example is July 1, 2014.

Union prevailing wage rates are updated to reflect all rate changes in the collective bargaining agreement (CBA) governing this classification and rate.

Survey Rate Identifiers

Classifications listed under the "SU" identifier indicate that no one rate prevailed for this classification in the survey and the published rate is derived by computing a weighted average rate based on all the rates reported in the survey for that classification. As this weighted average rate includes all rates reported in the survey, it may include both union and non-union rates. Example: SULA2012-007 5/13/2014. SU indicates the rates are survey rates based on a weighted average calculation of rates and are not majority rates. LA indicates the State of Louisiana. 2012 is the year of survey on which these classifications and rates are based. The next number, 007 in the example, is an internal number used in producing the wage determination. 5/13/2014 indicates the survey completion date for the classifications and rates under that identifier.

Survey wage rates are not updated and remain in effect until a new survey is conducted.

Union Average Rate Identifiers

Classification(s) listed under the UAVG identifier indicate that no single majority rate prevailed for those classifications; however, 100% of the data reported for the classifications was union data. EXAMPLE: UAVG-OH-0010

08/29/2014. UAVG indicates that the rate is a weighted union average rate. OH indicates the state. The next number, 0010 in the example, is an internal number used in producing the wage determination. 08/29/2014 indicates the survey completion date for the classifications and rates under that identifier.

A UAVG rate will be updated once a year, usually in January of each year, to reflect a weighted average of the current negotiated/CBA rate of the union locals from which the rate is based.

WAGE DETERMINATION APPEALS PROCESS

1.) Has there been an initial decision in the matter? This can be:

* an existing published wage determination

* a survey underlying a wage determination

* a Wage and Hour Division letter setting forth a position on a wage determination matter

* a conformance (additional classification and rate) ruling

On survey related matters, initial contact, including requests for summaries of surveys, should be with the Wage and Hour

Regional Office for the area in which the survey was conducted because those Regional Offices have responsibility for the

Davis-Bacon survey program. If the response from this initial contact is not satisfactory, then the process described in 2.)

and 3.) should be followed.

With regard to any other matter not yet ripe for the formal process described here, initial contact should be with the

Branch of Construction Wage Determinations. Write to:

Branch of Construction Wage Determinations

Wage and Hour Division

U.S. Department of Labor

200 Constitution Avenue, N.W.

Washington, DC 20210

2.) If the answer to the question in 1.) is yes, then an interested party (those affected by the action) can request review and reconsideration from the Wage and Hour Administrator

(See 29 CFR Part 1.8 and 29 CFR Part 7). Write to:

Wage and Hour Administrator

U.S. Department of Labor

The request should be accompanied by a full statement of the interested party's position and by any information (wage payment data, project description, area practice material, etc.) that the requestor considers relevant to the issue.

3.) If the decision of the Administrator is not favorable, an interested party may appeal directly to the Administrative

Review Board (formerly the Wage Appeals Board). Write to:

Administrative Review Board

U.S. Department of Labor

4.) All decisions by the Administrative Review Board are final.

END OF GENERAL DECISION