ACED - SPI-PHST-320 (First Fire Assembly).pdf

SPECIAL PACKAGING INSTRUCTION (SPI)

(DEVELOPED IN ACCORDANCE WITH MIL-STD-2073-1E)

NAVAL PACKAGING, HANDLING, STORAGE, AND TRANSPORTATION (PHST) CENTER

NAVAL SURFACE WARFARE CENTER (NSWC)

INDIAN HEAD EXPLOSIVE ORDNANCE DISPOSAL TECHNOLOGY DIVISION (IHEODTD)

DETACHMENT PICATINNY, BUILDING 458, WHITTEMORE AVE., PICATINNY ARSENAL, NJ, 07806-5000 http://www.navsea.navy.mil/Home/WarfareCenters/NSWCIndianHeadEODTechnology/WhatWeDo/ TechnicalDepartments/SystemsIntegration/PHST.aspx

1. SPI NUMBER

SPI-PHST-320

2. DATE 3. CURRENT REVISION

BASIC

4. NATIONAL STOCK NUMBER (NSN)-DODIC-NALC

TBD

5. CAGE NO. - PART/DRAWING NUMBER

53711 - 6260715

6.CAGE

040L3

7. NOMENCLATURE

ANTI-COMPROMISE EMERGENCY DESTRUCT (ACED) FIRST

FIRE ASSEMBLY

8. UNIT OF ISSUE

EACH

9. QTY PER UNIT PACK: (U/P)

ONE

10. UNIT PACK WEIGHT (LB)

TBD

11. UNIT PACK CUBE (CU FT)

N/A

12. UNIT PACK OUTSIDE DIMENSIONS

14 INCH LONG BY 6 INCH WIDE BARRIER BAG

13. METHOD OF PRESERVATION

PRESERVATION SHALL BE IN ACCORDANCE WITH (IAW) THIS SPI

14. ICQ

N/A

15. SPECIAL MARKING CODE

MARKINGS SHALL BE IAW THIS SPI

16a. LEVEL A PACKING N/A

16b. LEVEL B PACKING N/A

17a. LEVEL A PACKING CLOSURE N/A

17b. LEVEL B PACKING CLOSURE N/A

18. FIBERBOARD BOX WEIGHT (LB)

TBD

19. FIBERBOARD BOX CUBE (CU FT)

0.486

20. FIBERBOARD BOX OUTSIDE DIMENSIONS (LWH)

20.00 BY 14.00 BY 3.00 INCHES

21. QUALIFICATION TEST REPORT - N/A

FIGURE 1

FIGURE 1. - FIBERBOARD BOX

22. SIGNATURES/APPROVALS/REVISIONS

BASIC

OR

REVISION

DESCRIPTION OF CHANGES

(REVISIONS ONLY)

NOSSA HAZARD CLASSIFICATION

CODE N851

NSWC IHEODTD

CAD/PAD SENIOR ENGINEER

ROBERT HASTINGS, CODE E2

DIRECTOR, NAVAL PHST CENTER,

NSWC IHEODTD DET PICATINNY,

CODE G1

BASIC ------------------------------

DISTRIBUTION A: APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLIMITED.

http://www.navsea.navy.mil/Home/WarfareCenters/NSWCIndianHeadEODTechnology/WhatWeDo/TechnicalDepartments/SystemsIntegration/PHST.aspx http://www.navsea.navy.mil/Home/WarfareCenters/NSWCIndianHeadEODTechnology/WhatWeDo/TechnicalDepartments/SystemsIntegration/PHST.aspx

1. SPI NUMBER

SPI-PHST-320

2. DATE 3. CURRENT REVISION

BASIC

4. NATIONAL STOCK NUMBER

TBD

5. CAGE NO. - PART/DRAWING NUMBER

53711 - 6260715

6. CAGE

040L3

7. NOMENCLATURE

ANTI-COMPROMISE EMERGENCY DESTRUCT

(ACED) FIRST FIRE ASSEMBLY

8. UNIT OF ISSUE

EACH

PACKING INSTRUCTIONS

23. BILL OF MATERIALS

ITEM

NO.

QTY

REQD

MATERIAL DESCRIPTION SIZE MATERIAL SPECIFICATION/PART NUMBER/NSN

1. AR BARRIER MATERIALS, FLEXIBLE,

ELECTROSTATIC DISCHARGE

PROTECTIVE, HEAT-SEALABLE

BAG DIMENSIONS:

14 INCH LONG BY 6 INCH WIDE

MATERIAL: MIL-PRF-81705, TYPE I (WATER VAPOR

PROOF, ELECTROSTATIC PROTECTIVE,

ELECTROSTATIC AND ELECTROMAGNETIC

SHIELDING), CLASS 1 (UNLIMITED USE)

2. AR CUSHIONING MATERIAL, CELLULOSIC,

PACKAGING

0.020 INCH, 4-LAYER A-A-1898 CLASS C: HIGH TENSILE STRENGTH

3. 3 DESICCANT, TYVEK BAG UNIT SIZE: 1/6 MIL-D-3464 TYPE II

4. 3 HUMIDITY INDICATOR CARD, 30-40-50%

REVERSIBLE

MIL-I-8835

5. AR LABEL, WEATHERPROOF MIL-PRF-61002 OR COMMERCIAL EQUIVALENT

6. 6 METHOD 50 LABEL HTTPS://WWW.LABELMASTER.COM/SHOP/LABELS/

REGULATED-MARKINGS-AND-LABELS/METHOD-50-

LABELS/ OR EQUIVALENT

7. 6 FIBERBOARD BOX 20.00 BY 14.00 BY 3.00 INCHES ASTM D5118/D5118M

8. AR TAMPER EVIDENT INDUSTRIAL SECURITY

TAPE

2-INCH WIDE 36 LBS TENSILE STRENGTH

HTTPS://WWW.ULINE.COM/BL_3079/INDUSTRIAL-

SECURITY-TAPE

9. AR FIBERBOARD SHEET MATERIAL ASTM D4727/D4727M, SINGLE WALL CONSTRUCTION,

EDGE CRUSH TEST (ECT) 32 LBS/IN)

10. 7 PRESSURE-SENSITIVE ADHESIVE LABELS

FOR BAR CODING

MIL-PRF-61002, GRADE A, STYLE 2, COMPOSITION b

11. 1 DOT LABEL FOR EXPLOSIVES 1.3C COMMERCIAL

HTTP://WWW.MYSAFETYLABELS.COM/MSL/QS/

1.3C.ASPX

OR COMMERCIAL EQUIVALENT

12. 2 TRACEABLE SEAL, WEATHERPROOF NAVSEA DRAWING 8601830, SEE FIGURE 7

13. AR MATERIAL CONDITION TAG OR LABEL:

• SERVICEABLE

• SUSPENDED

• TEST/MODIFICATION

• UNSERVICEABLE (REPAIRABLE)

• UNSERVICEABLE (CONDEMNED)

• DD FORM 1574-1 (TAG), (LABEL)

• DD FORM 1575 (TAG), DD FORM 1575-1 (LABEL)

• DD FORM 1576 (TAG), DD FORM 1576-1 (LABEL)

• DD FORM 1577-2 (TAG), DD FORM 1577-3 (LABEL)

• DD FORM 1577 (TAG), DD FORM 1577-1 (LABEL)

14. AR ENVELOPE, ADHESIVE -BACKED, WATER

RESISTANT

3.7 INCHES BY 7.8 INCHES NSN 8105-00-756-2710

15. AR COMPOUND, OBLITERATING, AEROSOL NSN 8010-00-582-4743

HTTPS://WWW.LABELMASTER.COM/SHOP/LABELS/REGULATED-MARKINGS-AND-LABELS/METHOD-50-LABELS/ HTTPS://WWW.LABELMASTER.COM/SHOP/LABELS/REGULATED-MARKINGS-AND-LABELS/METHOD-50-LABELS/

HTTPS://WWW.ULINE.COM/BL_3079/INDUSTRIAL-SECURITY-TAPE

http://www.mysafetylabels.com/MSL/QS/1.3c.aspx

SPI-PHST-320

2. DATE 3. CURRENT REVISION

BASIC

4. NATIONAL STOCK NUMBER

TBD

5. CAGE NO. - PART/DRAWING NUMBER

53711 - 6260715

6. CAGE

040L3

7. NOMENCLATURE

ANTI-COMPROMISE EMERGENCY DESTRUCT

(ACED) FIRST FIRE ASSEMBLY

8. UNIT OF ISSUE

EACH

PACKING INSTRUCTIONS

(REMAINDER OF PAGE INTENTIONALLY LEFT BLANK)

24. REMARKS

A. SAFETY PRECAUTIONS. EXPLOSIVE DEVICES SHALL BE HANDLED, STORED, AND SHIPPED IN ACCORDANCE WITH THE GENERAL SAFETY PRECAUTIONS GIVEN IN THE SAFETY SUMMARY OF NAVAIR 11-100-1.1 FLEET SUPPORT FOR IN-SERVICE CARTRIDGES, CARTRIDGE ACTUATED DEVICES (CADS) AND PROPELLANT ACTUATED DEVICES (PADS).

B. THE BAR CODE SYMBOLOGY AND HUMAN READABLE INFORMATION (HRI) THAT ARE TO BE APPLIED SHALL BE IN ACCORDANCE

WITH MIL-STD-129.

C. ICQ - INTERMEDIATE CONTAINER QUANTITY. PER DEFENSE LOGISTICS AGENCY (DLA) AN INTERMEDIATE CONTAINER IS DEFINED AS A WRAP, BOX, OR BUNDLE CONTAINING TWO OR MORE UNIT PACKS OF IDENTICAL ITEMS. HTTP://WWW.DLA.MIL/ LANDANDMARITIME/OFFERS/SERVICES/TECHNICALSUPPORT/LOGISTICS/PACKAGING/DEFINITIONS.ASPX.

D. NAVSUP P-805 - AMMUNITION SENTENCING PUBLICATION.

E. NAVSEA SW020-AC-SAF-010. TRANSPORTATION AND STORAGE DATA FOR AMMUNITION, EXPLOSIVES AND RELATED HAZARDOUS

MATERIALS.

F. 49 CFR - SUBPART E - LABELING 172.406: PLACEMENT OF LABELS.

G. MIL-STD-2073-1 -DEPARTMENT OF DEFENSE STANDARD PRACTICE FOR MILITARY PACKAGING.

H. UNIT PACK:THE FIRST TIE, WRAP, OR CONTAINER APPLIED TO A SINGLE ITEM, OR A QUANTITY THEREOF, OR TO A GROUP OF ITEMS OF A SINGLE STOCK NUMBER, PRESERVED OR UNPRESERVED, WHICH CONSTITUTES A COMPLETE OR IDENTIFIABLE PACKAGE. A

UNIT PACK IS ALSO OFTEN REFERRED TO AS A 'PACKAGE' OR MERELY AS A “PACK.” HTTP://WWW.DLA.MIL/LANDANDMARITIME/

OFFERS/SERVICES/TECHNICALSUPPORT/LOGISTICS/PACKAGING/DEFINITIONS.ASPX.

I. PERFORMANCE ORIENTED PACKAGING (POP) CERTIFICATION REQUIREMENT: THE CONTRACTOR SHALL PERFORM TESTING AND SHALL ACQUIRE DATA NECESSARY TO SUPPORT COMPLIANCE WITH POP REQUIREMENTS OF HAZARDOUS MATERIALS AS DEFINED IN TITLE 49, CODE OF FEDERAL REGULATIONS (CFR), THE INTERNATIONAL MARITIME ORGANIZATION'S INTERNATIONAL MARITIME DANGEROUS GOODS (IMDG) CODE, AND THE INTERNATIONAL CIVIL AVIATION ORGANIZATION (ICAO) TECHNICAL INSTRUCTIONS FOR THE SAFE TRANSPORT OF HAZARDOUS GOODS. TESTING SHALL BE PERFORMED IN ACCORDANCE WITH AMERICAN SOCIETY

FOR TESTING AND MATERIALS (ASTM) D4919. STANDARD GUIDE FOR TESTING.

http://www.dla.mil/LandandMaritime/Offers/Services/TechnicalSupport/Logistics/Packaging/Definitions.aspx http://www.dla.mil/LandandMaritime/Offers/Services/TechnicalSupport/Logistics/Packaging/Definitions.aspx http://www.dla.mil/LandandMaritime/Offers/Services/TechnicalSupport/Logistics/Packaging/Definitions.aspx http://www.dla.mil/LandandMaritime/Offers/Services/TechnicalSupport/Logistics/Packaging/Definitions.aspx

SPI-PHST-320

2. DATE 3. CURRENT REVISION

BASIC

4. NATIONAL STOCK NUMBER

TBD

5. CAGE NO. - PART/DRAWING NUMBER

53711 - 6260715

6. CAGE

040L3

7. NOMENCLATURE

ANTI-COMPROMISE EMERGENCY DESTRUCT

(ACED) FIRST FIRE ASSEMBLY

8. UNIT OF ISSUE

EACH

PACKING INSTRUCTIONS

ORDER OF PRECEDENCE. IN THE EVENT OF A CONFLICT BETWEEN THE TEXT OF THIS DOCUMENT AND OTHER PUBLISHED REFERENCES, THE TEXT OF THIS DOCUMENT TAKES PRECEDENCE. NOTHING IN THIS DOCUMENT, HOWEVER, SUPERSEDES APPLICABLE LAWS AND REGULATIONS UNLESS A SPECIFIC EXEMPTION HAS BEEN OBTAINED.

SAFETY PRECAUTIONS. EXPLOSIVE DEVICES SHALL BE HANDLED, STORED, AND SHIPPED IN ACCORDANCE WITH THE GENERAL SAFETY PRECAUTIONS GIVEN IN THE SAFETY SUMMARY OF NAVAIR 11-100-1.1, FLEET SUPPORT FOR IN-SERVICE CARTRIDGES, CARTRIDGE ACTUATED DEVICES (CADS) AND PROPELLANT ACTUATED DEVICES (PADS).

NOTE

THE FIRST FIRE ASSEMBLY COMES FROM MANUFACTURER PACKAGED AS SHOWN IN

FIGURE 2.

FIGURE 2

FIGURE 2. FIRST FIRE ASSEMBLY (LOOSE POWDER) PACKED IN TRANSPARENT BARRIER BAG

NOTE

MAKE NOTE OF FIRST FIRE ASSEMBLY SERIAL NUMBER (WHEN SERIAL NUMBER IS

ASSIGNED) AND LOT NUMBER FOR FUTURE USE.

1. INSPECT FIRST FIRE ASSEMBLY TO BE PACKED FOR DEFECTS WHICH MAY AFFECT ITS FUNCTION. NOTIFY SUPERVISOR IF

FIRST FIRE ASSEMBLY IS SUSPECT.

2. OBTAIN BARRIER BAG MATERIAL, ITEM 1 AND TRANSFER TO PACKING AREA. IF REQUIRED, FABRICATE THE HEAT-

SEALABLE BARRIER BAG, CUT TO DIMENSIONS 14 INCH LONG BY 6 INCH WIDE.

3. OBTAIN CUSHIONING MATERIAL, ITEM 2, AND CAREFULLY WRAP IT AROUND BARRIER BAGGED FIRST FIRE ASSEMBLY.

4. OBTAIN ONE DESICCANT BAG, ITEM 3, AND HUMIDITY INDICATOR CARD, ITEM 4, SEE FIGURE 3.

5. CAREFULLY PLACE THE CUSHION WRAPPED FIRST FIRE ASSEMBLY, DESICCANT BAG AND HUMIDITY INDICATOR

CARD INTO THE 14 INCH LONG BY 6 INCH WIDE BARRIER BAG.

SPI-PHST-320

2. DATE 3. CURRENT REVISION

BASIC

4. NATIONAL STOCK NUMBER

TBD

5. CAGE NO. - PART/DRAWING NUMBER

53711 - 6260715

6. CAGE

040L3

7. NOMENCLATURE

ANTI-COMPROMISE EMERGENCY DESTRUCT

(ACED) FIRST FIRE ASSEMBLY

8. UNIT OF ISSUE

EACH

PACKING INSTRUCTIONS

FIGURE 3

FIGURE 3. DESICCANT AND HUMIDITY INDICATOR CARD

FIGURE 4

FIGURE 4. FIRST FIRE ASSEMBLY PACKED IN SEALED AND LABELED BARRIER BAG

SPI-PHST-320

2. DATE 3. CURRENT REVISION

BASIC

4. NATIONAL STOCK NUMBER

TBD

5. CAGE NO. - PART/DRAWING NUMBER

53711 - 6260715

6. CAGE

040L3

7. NOMENCLATURE

ANTI-COMPROMISE EMERGENCY DESTRUCT

(ACED) FIRST FIRE ASSEMBLY

8. UNIT OF ISSUE

EACH

PACKING INSTRUCTIONS

6. REMOVE/EVACUATE AIR FROM THE BARRIER BAG.

WARNING

ENSURE LOCAL SAFETY PROCEDURES ARE FOLLOWED WHEN OPERATING BARRIER BAG

HEAT SEAL EQUIPMENT.

7. HEAT SEAL BARRIER BAG UNTIL FULLY SEALED, SEE FIGURE 4.

8. OBTAIN METHOD 5O LABEL, ITEM 6, AND INSTALL ON BARRIER BAG AS SHOWN IN FIGURE 4.

9. PRINT FOLLOWING INFORMATION ON LABEL, ITEM 5. LABELS SHOULD BE PRE-PRINTED BLACK LETTERS ON A WHITE

BACKGROUND.

NOTE

WORDS SUCH AS “QUANTITY”, AND “ITEM DESCRIPTION” SHALL NOT BE INCLUDED AS

PART OF IDENTIFICATION MARKINGS.

NOTE

LETTERING/MARKINGS SHALL BE IN CAPITAL LETTERS OF EQUAL HEIGHT, CLEARLY

VISIBLE, AND LARGEST SIZE PRACTICAL FOR PACKAGE SIZE WITHIN ACCEPTABLE

RANGE. WHEN MARKING SPACE PERMITS, STENCILED OR PRE-PRINTED MARKINGS

SHALL BE NOT LESS THAN 3/32 OF AN INCH.

NOTE

QUANTITY ALWAYS PRECEDES ITEM DESCRIPTION ON SAME LINE.

NOTE

ITEM DESCRIPTION MAY BE MARKED ON MORE THAN ONE LINE IF REQUIRED DUE TO

SPACE LIMITATIONS.

A. QUANTITY AND ITEM DESCRIPTION: ONE - FIRST FIRE ASSEMBLY.

B. PART NUMBER: 53711 - 6260715.

C. SERIAL NUMBER - (INSERT SERIAL NO.): “SERIAL” SHALL PRECEDE SERIAL NUMBER.

D. LOT NUMBER: (INSERT LOT NO.) THE WORD “LOT” SHALL PRECEDE LOT NUMBER.

10. AFFIX LABEL ON BARRIER BAG EXTERIOR AS SHOWN IN FIGURE 4.

SPI-PHST-320

2. DATE 3. CURRENT REVISION

BASIC

4. NATIONAL STOCK NUMBER

TBD

5. CAGE NO. - PART/DRAWING NUMBER

53711 - 6260715

6. CAGE

040L3

7. NOMENCLATURE

ANTI-COMPROMISE EMERGENCY DESTRUCT

(ACED) FIRST FIRE ASSEMBLY

8. UNIT OF ISSUE

EACH

PACKING INSTRUCTIONS

FIGURE 5

FIGURE 5. PACKAGING ARRANGEMENT FOR THREE FIRST FIRE ASSEMBLIES

11. OBTAIN CUSHIONING MATERIAL, ITEM 2, AND CAREFULLY WRAP IT AROUND BARRIER BAGGED FIRST FIRE

ASSEMBLY.

12. OBTAIN FIBERBOARD BOX, ITEM 7, AND IF REQUIRED, TAPE FIBERBOARD BOX BOTTOM SEAM USING SECURITY TAPE, ITEM 8. SEAL BOTTOM OF BOX DOWN CENTER SEAM WITH ONE STRIP OF TAPE, SEE FIGURE 1.

13. OBTAIN FIBERBOARD SHEET MATERIAL, ITEM 9, AND FABRICATE SHEETS TO SEPARATE THE BAGGED FIRST FIRE

ASSEMBLIES FROM TOUCHING EACH OTHER AS SHOWN IN FIGURE 5.

14. INSTALL THREE CUSHION MATERIAL WRAPPED BARRIER BAG FIRST FIRE ASSEMBLIES AS SHOWN IN FIGURE 5.

ADD CUSHIONING MATERIAL, ITEM 2, AS SHOWN TO ENSURE A TIGHT PACK.

15. FOLD FLAPS ON TOP OF FIBERBOARD BOX SO THAT THEY MEET, AND USING SECURITY TAPE, ITEM 8, SEAL THE FIBERBOARD BOX AS SHOWN IN FIGURE 1. ALSO TAPE FIBERBOARD BOX CORNER SEAMS AS SHOWN.

16. FOLLOWING INFORMATION SHALL BE APPLIED ON PRE-PRINTED LABELS, ITEM 5. LABELS SHOULD BE BLACK LETTERS ON A WHITE BACKGROUND. LABELS MUST BE PLACED ON EXTERIOR OF FIBERBOARD BOX AS SHOWN

IN FIGURE 6.

NOTE

WORDS SUCH AS “ITEM DESCRIPTION” AND “PART NUMBER” SHALL NOT BE INCLUDED

AS PART OF IDENTIFICATION MARKINGS.

SPI-PHST-320

2. DATE 3. CURRENT REVISION

BASIC

4. NATIONAL STOCK NUMBER

TBD

5. CAGE NO. - PART/DRAWING NUMBER

53711 - 6260715

6. CAGE

040L3

7. NOMENCLATURE

ANTI-COMPROMISE EMERGENCY DESTRUCT

(ACED) FIRST FIRE ASSEMBLY

8. UNIT OF ISSUE

EACH

PACKING INSTRUCTIONS

NOTE

LETTERING/MARKINGS SHALL BE IN CAPITAL LETTERS OF EQUAL HEIGHT, CLEARLY

VISIBLE, AND LARGEST SIZE PRACTICAL FOR PACKAGE SIZE WITHIN ACCEPTABLE

RANGE. WHEN MARKING SPACE PERMITS, STENCILED OR PRE-PRINTED MARKINGS

SHALL BE NOT LESS THAN 3/32 OF AN INCH.

NOTE

QUANTITY ALWAYS PRECEDES ITEM DESCRIPTION ON SAME LINE.

NOTE

ITEM DESCRIPTION MAY BE MARKED ON MORE THAN ONE LINE IF REQUIRED DUE TO

SPACE LIMITATIONS

A. QUANTITY AND ITEM DESCRIPTION: THREE- FIRST FIRE ASSEMBLIES.

B. PART NUMBER: 53711 - 6260715.

C. WEIGHT - THE CAPITAL LETTERS “WT” SHALL PRECEDE NUMERICAL GROSS WEIGHT IN POUNDS, ROUNDED TO

NEXT WHOLE POUND. THE NUMERICAL WEIGHT SHALL BE FOLLOWED WITH ABBREVIATION FOR POUNDS “LBS”

IN CAPITAL LETTERS.

D. CONTRACT/PURCHASE ORDER NUMBER - (INSERT CONTRACT/PURCHASE ORDER NUMBER), IF APPLICABLE.

E. AIR ELIGIBILITY MARKING IAW MIL-STD-129, IF APPLICABLE.

F. IF APPLICABLE, NET EXPLOSIVE WEIGHT (NEW) FOR AIR SHIPMENTS - 1.00 LB (454 G).

G. SERIAL NUMBER(S) (WHEN SERIAL NUMBER IS ASSIGNED) - (INSERT SERIAL NO.) - “SER” SHALL PRECEDE SERIAL

NUMBER.

NOTE

THE LOWER-MOST MARKING ON FIBERBOARD (OUTER) BOX SIDE CONTAINING ITEM

DESCRIPTION (NOMENCLATURE) SHALL BE AMMUNITION LOT NUMBER. LOT NUMBER

SHALL BE PRECEDED BY THE WORD “LOT” AND SHALL BE UNDERLINED WITH A SOLID

LINE APPROXIMATELY 0.13 INCH (3.18 MM) THICK.

H. LOT NUMBER.

SPI-PHST-320

2. DATE 3. CURRENT REVISION

BASIC

4. NATIONAL STOCK NUMBER

TBD

5. CAGE NO. - PART/DRAWING NUMBER

53711 - 6260715

6. CAGE

040L3

7. NOMENCLATURE

ANTI-COMPROMISE EMERGENCY DESTRUCT

(ACED) FIRST FIRE ASSEMBLY

8. UNIT OF ISSUE

EACH

PACKING INSTRUCTIONS

FIGURE 6

FIGURE 6. FIBERBOARD BOX LABELS

NOTE

PROPER SHIPPING NAME (PSN) AND UNITED NATIONS (UN) HAZMAT IDENTIFICATION

NUMBER (OR NORTH AMERICAN (NA) NUMBER) SHALL BE MARKED ON THE PACKAGE IN

A CLEAR AREA AWAY FROM ANY OTHER BOX MARKING.

I. PROPER SHIPPING NAME - PROPELLANT, SOLID

J. UN NUMBER - UN0499.

K. VERIFY UN CERTIFICATION (POP) MARKING IS ON BOX AS SHOWN IN FIGURE 6.

L. APPLY, ITEM 11, DOT LABEL FOR EXPLOSIVES 1.3C TO SIDE OF THE FIBERBOARD BOX, ITEM 7, AS SHOWN IN

FIGURE 6. PER 49 CFR - SUBPART E - LABELING 172.406: PLACEMENT OF LABELS. MUST BE LOCATED ON THE SAME

SURFACE OF THE PACKAGE AND NEAR THE PROPER SHIPPING NAME (PSN) MARKING, IF THE PACKAGE

DIMENSIONS ARE ADEQUATE.

M. APPLY LOT NUMBER ON ENDS OF FIBERBOARD (OUTER) BOX AS SHOWN IN FIGURE 6.

SPI-PHST-320

2. DATE 3. CURRENT REVISION

BASIC

4. NATIONAL STOCK NUMBER

TBD

5. CAGE NO. - PART/DRAWING NUMBER

53711 - 6260715

6. CAGE

040L3

7. NOMENCLATURE

ANTI-COMPROMISE EMERGENCY DESTRUCT

(ACED) FIRST FIRE ASSEMBLY

8. UNIT OF ISSUE

EACH

PACKING INSTRUCTIONS

NOTE

UN PERFORMANCE SPECIFICATION (CERTIFICATION) MARKING TO BE IN ACCORDANCE

WITH THE APPROVED CONTRACTOR TEST REPORT.

N. THE UN PERFORMANCE SPECIFICATION (CERTIFICATION), AS SPECIFIED BY THE CONTRACTOR TEST REPORT, SHALL BE MARKED ON THE SIDE OF THE FIBERBOARD BOX THAT IS OPPOSITE THE IDENTIFICATION MARKED

SIDE, SEE FIGURE 6.

NOTE

THE FOLLOWING MARKINGS MUST BE UNOBSCURED BY LABELS OR ATTACHMENTS; AND

MUST BE LOCATED AWAY FROM ANY OTHER MARKING THAT COULD SUBSTANTIALLY

REDUCE ITS EFFECTIVENESS.

NOTE

BAR CODE LABELS USED SHALL MEET THE REQUIREMENTS OF A GRADE A, STYLE 2,

COMPOSITION b LABEL AS SPECIFIED IN MIL-PRF-61002 EXCEPT THAT SOLVENT AND

DETERGENT RESISTANCE IS NOT REQUIRED. THE LABELS SHOULD BE THE PRESSURE

SENSITIVE ADHESIVE TYPE.

NOTE

THE BAR CODE SYMBOLOGY AND HUMAN READABLE INFORMATION (HRI) THAT ARE TO

BE APPLIED SHALL BE IN ACCORDANCE WITH MIL-STD-129. USING ITEM 10, FABRICATE

BAR CODE LABELS IN ACCORDANCE WITH MIL-STD-129.

17. AFFIX THE BAR CODE LABEL ON THE FIBERBOARD BOX, ITEM 7, AS SHOWN IN FIGURE 6. THE BAR CODE

APPLICATION AND LOCATION SHALL BE IN ACCORDANCE WITH MIL-STD-129.

NOTE

THE SEALS MAY BE PRE-PRINTED, STAMPED OR MARKED WITH THE ACTIVITY SYMBOL

OR IDENTIFIER. FOR GOVERNMENT ACTIVITIES, PREPRINTING OF INDIVIDUAL

INSPECTOR INDICATORS IS NOT AUTHORIZED.

FIGURE 7

FIGURE 7. EXAMPLE OF TYPE 2 SEAL

SPI-PHST-320

2. DATE 3. CURRENT REVISION

BASIC

4. NATIONAL STOCK NUMBER

TBD

5. CAGE NO. - PART/DRAWING NUMBER

53711 - 6260715

6. CAGE

040L3

7. NOMENCLATURE

ANTI-COMPROMISE EMERGENCY DESTRUCT

(ACED) FIRST FIRE ASSEMBLY

8. UNIT OF ISSUE

EACH

PACKING INSTRUCTIONS

YOUR COMMENTS AND QUESTIONS REGARDING THIS DOCUMENT ARE ENCOURAGED. PLEASE RESPOND TO: NAVAL PACKAGING, HANDLING, STORAGE, AND TRANSPORTATION (PHST) CENTER, NAVAL SURFACE WARFARE CENTER (NSWC) INDIAN HEAD EXPLOSIVE ORDNANCE DISPOSAL TECHNOLOGY DIVISION (IHEODTD), DETACHMENT PICATINNY, CODE G11 (AIR), KATHY HERC, BUILDING 458, WHITTEMORE AVE., PICATINNY ARSENAL, NJ 07806-5000, (973) 724-8089, DSN 880-8089, EMAIL ADDRESS:

KATHY.HERC@NAVY.MIL

NOTE

NAVY AND MARINE CORPS ACTIVITIES: TYPE 2 TRACEABLE SEALS APPLIED BY NAVY

AND MARINE CORPS ACTIVITIES SHALL INCLUDE THE ACTIVITY'S UNIT IDENTIFICATION

CODE (UIC) AS WELL AS APPLICATION OF AN INDIVIDUAL INSPECTION INDICATOR STAMP.

THE INSPECTOR INDICATOR STAMP SHALL BE A NUMERIC OR ALPHA-NUMERIC

IDENTIFIER TRACEABLE TO THE INDIVIDUAL ASSIGNED THE INSPECTION INDICATOR

STAMP. AN ACCEPTABLE ALTERNATE METHOD OF CERTIFYING THE TRACEABLE SEAL IS

TO APPLY, WITH A PERMANENT MARKER, THE INSPECTORS PRINTED NAME, SIGNATURE,

AND ACTIVITY UIC, IF THE UIC IS NOT PREPRINTED.

NOTE

SIZE THE TRACEABLE SEALS SO THAT THE MARKINGS AND LABELS ARE NOT OBSCURED.

18. USING ITEM 12, FABRICATE TYPE 2 SEALS, SEE FIGURE 7. THE SEALS SHALL BE APPLIED TO THE FIBERBOARD BOX, ITEM 7, SO THAT THEY MUST BE REMOVED, CUT OR DEFACED IN ORDER TO OPEN THE FIBERBOARD BOX

TO REMOVE THE FIRST FIRE ASSEMBLY.

19. PROPERLY FILL OUT A MATERIAL CONDITION TAG OR LABEL, ITEM 13. IF USING A TAG, PLACE TAG IN WATER RESISTANT

ADHESIVE-BACKED ENVELOPE, ITEM 14, AND ATTACH TO FIBERBOARD CONTAINER.

(REMAINDER OF PAGE INTENTIONALLY LEFT BLANK)

SPI-PHST-320

2. DATE 3. CURRENT REVISION

BASIC

4. NATIONAL STOCK NUMBER

TBD

5. CAGE NO. - PART/DRAWING NUMBER

53711 - 6260715

6. CAGE

040L3

7. NOMENCLATURE

ANTI-COMPROMISE EMERGENCY DESTRUCT

(ACED) FIRST FIRE ASSEMBLY

8. UNIT OF ISSUE

EACH

UNPACKING INSTRUCTIONS

YOUR COMMENTS AND QUESTIONS REGARDING THIS DOCUMENT ARE ENCOURAGED. PLEASE RESPOND TO: NAVAL PACKAGING, HANDLING, STORAGE, AND TRANSPORTATION (PHST) CENTER, NAVAL SURFACE WARFARE CENTER (NSWC) INDIAN HEAD EXPLOSIVE ORDNANCE DISPOSAL TECHNOLOGY DIVISION (IHEODTD), DETACHMENT PICATINNY, CODE G11 (AIR), KATHY HERC, BUILDING 458, WHITTEMORE AVE., PICATINNY ARSENAL, NJ 07806-5000, (973) 724-8089, DSN 880-8089, EMAIL ADDRESS:

KATHY.HERC@NAVY.MIL

1. TRANSPORT PACKED FIBERBOARD BOX TO UNPACKING AREA. PLACE BOX ON A LEVEL WORK SURFACE.

2. INSPECT FIBERBOARD (OUTER) BOX FOR EVIDENCE OF TAMPERING. REPORT ANY EVIDENCE TO SUPERVISOR.

3. SLIT TRACEABLE (ANTIPILFERAGE) SEALS SO FIBERBOARD BOX MAY BE OPENED.

CAUTION

EXERCISE CARE TO NOT CUT FIRST FIRE ASSEMBLY TRANSPARENT BAG.

4. CAREFULLY CUT OR REMOVE PACKAGING SECURITY TAPE AND OPEN FIBERBOARD BOX. REMOVE TOP LAYER OF CUSHIONING MATERIAL AND DISPOSE OF UNSERVICEABLE CUSHIONING MATERIAL IN ACCORDANCE WITH LOCAL

DISPOSAL INSTRUCTIONS.

CAUTION

EXERCISE CARE TO NOT CUT FIRST FIRE ASSEMBLY TRANSPARENT BAG.

5. CAREFULLY REMOVE BAGGED FIRST FIRE ASSEMBLY FROM FIBERBOARD BOX.

6. EXERCISING CARE REMOVE FIRST FIRE ASSEMBLY FROM (ALUMINIZED) BARRIER BAG.

7. INSPECT HUMIDITY INDICATOR CARD TO ENSURE ELEMENTS ARE STILL BLUE IN COLOR. REPORT TO SUPERVISOR IF

ELEMENT IS PINK IN COLOR.

8. CAREFULLY MOVE FIRST FIRE ASSEMBLY TO DESIGNATED PROCESSING AREA. CONTINUE UNPACKING PROCESS AS

REQUIRED.

9. DISPOSE OF UNSERVICEABLE DESICCANT, HUMIDITY INDICATOR CARD AND (ALUMINIZED) BARRIER BAG IN

ACCORDANCE WITH LOCAL DISPOSAL INSTRUCTIONS.

WARNING

READ SAFETY DATA SHEET (SDS) FOR COMPOUND, OBLITERATING, AEROSOL USED. THE

PRECAUTIONS, PROCEDURES AND SPECIAL PROTECTION INFORMATION CONCERNING THE

COMPOUND SHALL BE FOLLOWED.

10. REMOVE FROM FIBERBOARD BOX ALL PRE-EXISTING MARKINGS THAT INDICATE FIRST FIRE ASSEMBLIES ARE

PACKED INSIDE, USING COMPOUND, OBLITERATING, AEROSOL, ITEM 15.

11. DISPOSE OF FIBERBOARD BOX AND UNSERVICEABLE CUSHIONING MATERIAL IN ACCORDANCE WITH LOCAL

DISPOSAL INSTRUCTIONS.

Text1: 12/18/2017